Question about Midland Weather/Hazard Radio with SAME Local Alerts

Open Question

Midland weather radio is not sending alerts - Midland Weather/Hazard Radio with SAME Local Alerts

Posted by on

  • Rielle Burst Mar 29, 2011

    Good morning, afternoon, evening or night; what evertime you are reading this. I need some clarification from you about this problem. You say that your radio is not sending alerts. If you would kindly answer these questions, I would really appreciate it.

    1. Have you had any kind of bad weather lately, if so what kind and how severe?
    2. Have you programed your S.A.M.E code into your radio? Does your county or residence have more than one transmitter?
    3.What is your "Alert Type" set on?
    4. Is your radio turned on?

    Please reply back to this website and I will see what I can do. Thank you and have a wonderful day, afternoon, evening or night; whatever time you are viewing this.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: manuel for midland wr-100 weather radio

http://www.midlandradio.com/comersus/store/catalog/WR100.pdf

Posted on May 20, 2008

SOURCE: i have lost my instructions

codes for radio

Posted on Jun 29, 2008

  • 3 Answers

SOURCE: I need the code for

The same number is 0012127 Thanks ,Mike

Posted on Feb 25, 2009

  • 245 Answers

SOURCE: i need the codes for my midland wr100 alert radio

look up codes&frenqwency for scanners?

Posted on Jan 27, 2010

  • 164 Answers

SOURCE: Need instructions to reset my Midland weather

On the Midland Weather Radio WR-100 web page of this website, scroll down until you get to the "Manual" heading. There is a link there (WR-100 Weather/RDS Radio Manual); click it and your instructions manual will come up in a .pdf format. To get the frequency channel for Amarillo, go to this website- http://www.nws.noaa.gov/nwr/CntyCov/nwrTX.htm. I do not know what county you live, so you will have to look at every county listing that has your city name in its group. When you find the information you need, insert it into your radio.

Posted on Sep 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fips codes


FIPS are 5 digit codes..the 1st two codes are for the state: the last three are for the county. This link allows you to find both state and county for your area: http://www.epa.gov/enviro/html/codes/state.html

Apr 21, 2013 | Midland Radio Midland WR11 Desktop Alarm...

1 Answer

Where is reset button on midland wr-100 weather alert radio


I am not receiving any radio broadcast on the freq. that my radio is supposed to pick up. radio is on correct region code. What can I try?

Feb 26, 2012 | Midland WR-100 Weather/RDS Radio

1 Answer

Just bought a Midland 100B Weather Radio. I programmed the channel and SAME Set. I am not receiving any alerts. We are having an alert right now, but it is not displaying the LEDs or the voice/siren is not...


Good morning, afternoon, evening or night; whatever time of day you are viewing this solution post. Thank you for choosing FixYa to help solve this concern. You just purchased a Midland WR-100B All-Hazards Weather Radio. You have all the information programmed correctly in it and you are still not receiving any alerts. First of all, log on to this website and check to make sure that the transmitter tower in your area is still working (this means your county does not have a DEGRADED remark in its row).

http://www.nws.noaa.gov/nwr/indexnw.htm

When you get to the website, select your state and you will see a list of all the counties in your state. Find your county and locate the REMARKS column. If your county has a remark stating "OUT OF SERVICE" or "DEGRADED", it means the tower transmitting broadcasts for your state is not working due to technical problems or recent severe weather conditions. If your county doesn't have one of these remarks beside it, then the reason why you are not receiving any alerts on your radio is because the National Weather Service has special criteria that a storm has to meet in order for them to alert NOAA Weather Radio owners "In the middle of the night or while doing daily activities". To translate that for you, they don't want to disturb anyone by sending alerts for storms that are not "life threatening" or going to cause severe damage. Click on the links below to find out more information about when alerts are broadcast.

http://www.weather.gov/os/eas_codes.shtml

http://www.weather.gov/nwr/nwrwarn.htm

NWR always runs Required Weekly Testing every Wednesday starting from 10:00 AM to 12:00 PM. If you are able to, check the radio then. If you see the amber light shine, then you are receiving a test. http://www.weather.gov/nwr/nwrtest.htm is the place to find more information about NWR testing. I hope this will give you a better understanding of when the National Weather Service sends alerts to the viewing area. Thank you for choosing FixYa to as your one-stop solution spot for questions, concerns, problems and requests. Stay safe this Severe Weather Season and have a good morning, afternoon, evening or night; whatever time of day you are viewing this solution post.

May 26, 2011 | Midland WR-100 Weather/RDS Radio

1 Answer

Midland WR-100 Weather Radio Troubleshooting


With this radio receiver you have to set the county or counties code for the alert system to work. This encoded tones turn the radio to receive the alert signals.

Feb 09, 2010 | Midland WR-100 Weather/RDS Radio

1 Answer

Need to make sure programmed


Program the Midland 74-109 Weather Radio
a) Turn unit on. Extend the antenna. Adjust volume up slowly; Do you hear anything? If not, try replacing the 9 volt battery with a fresh one, in the accessible battery compartment underneath the unit. Repeat above steps.
b) If no sound is heard, turn unit over and look for "WEATHER" slide switch on bottom. With unit on & volume adjusted to comfortable hearing level, slowly slide switch down (or up) through various frequencies [1)162.550, 2) 162.400, 3) 162.475, 4) 162.425, 5) 162.450, 6) 162.500, 7) 162.525] until voice transmissions are heard. This should be the closest National Weather Service (NWS) broadcast for your area. Check the NWS website at http://www.nws.noaa.gov/nwr/nwrbro.htm for your state, click on the state name, and look for the site name or site location nearest you. The frequency for that site should be the strongest, and appropriate for your area.
c) You can set the alert tone, for special weather alert broadcasts, on the bottom of the unit on the slide switch marked "ALERT". Set the switch to the desired type of alert: 1) LED [LED on top of unit (marked ALERT) lights up when alert is broadcast-no siren tone/alarm is heard] 2) LED & ALARM [LED lights up and alarm/ siren tone is heard] 3) VOICE [LED on top of unit lights up and voice broadcast is heard, only; no siren tone/alarm is heard].
d) Be sure to press the "ALERT" button on top of the unit and leave the volume at a comfortable listening level to hear weather alerts for your area (Alert LED on top of unit lights up to show Alert function is active). You can test the present volume level by pressing the "TEST" button. Be sure to press the "ALERT" button again after listening to the volume level to re-set the Alert function. You can listen to weather broadcasts anytime, by pressing the "WEATHER" button. After listening, be sure to re-press the "ALERT" button to reset the Alert function.
e) 9 volt battery life should last about 6 to 7 months, depending on how much unit is used an number of alerts received. Replace battery every 6 months, or when you replace your smoke alarm battery, or at beginning and end of daylight savings time. A 12 volt AC adapter to replace the battery, can be used. One should have been supplied with unit. If not, a replacement can be found at Radio Shack.
f) This should complete your Midland Weather Alert Radio Model 74-109 programming.

Apr 09, 2009 | Midland 74-109 Weather Radio

1 Answer

Automatic Weather Alert


Weather Radio WR.100 was defective. Returned unit to retailor for replacement. Problem solved.

No further action required.

Krehgil
.

Sep 12, 2008 | Midland WR-100 Weather/RDS Radio

1 Answer

Manuel for midland wr-100 weather radio


http://www.midlandradio.com/comersus/store/catalog/WR100.pdf

Apr 24, 2008 | Midland WR-100 Weather/RDS Radio

1 Answer

Does not Broadcast Weather Alerts


Here's the URL for the owner's manual.

http://www.midlandradio.com/comersus/store/catalog/WR100.pdf

Feb 06, 2008 | Midland WR-100 Weather/RDS Radio

Not finding what you are looking for?
Midland Weather/Hazard Radio with SAME Local Alerts Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Midland Audio Players & Recorders Experts

Cindy Wells

Level 3 Expert

5097 Answers

kakima

Level 3 Expert

102366 Answers

John
John

Level 2 Expert

509 Answers

Are you a Midland Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...