Question about Toshiba Satellite C655-S5139 Notebook

1 Answer

I dont have board cd or dvd - Toshiba Satellite C655-S5139 Notebook

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 368 Answers

Glad to HELP YOU!

I did a check and I've also remembered that I had a Toshiba Satellite once a while ago... so I've found
1 THIS for the DRIVERS
and
2. THIS for a Toshiba forum.

I hope I was able to HELP YOU...

My best wishes!

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ps3 wont reconise any disk but everything else is fine


Ok ill tell you what you need to do,
1 try putting a standard music cd in the ps3 and see if that will play.
if it plays you need to get the bluray player replaced.
if it wont play music cd or standard dvd then this points to the fact either you have a dusty laser leans or it could mean the laser has give up and you need the whole drive replacing.

try going to hardware store and buying a cd leans cleaning cd and run this in your ps3 to remove any dust do this before taking your ps3 apart.

if you have any warranty left dont take it apart if your warranty has ran out ill tell you what to do.

first of all you need to take the case off the ps3 use google and type in how to repair ps3 then hit search this will list sites that tell you and show you how to take the ps3 apart doing this voids your warranty and will reduce the price when you come to sell it.
2 once its apart take out the dvd drive its held in only by 2 wires you pull the power wire out of the circuit board and tilt the drive to the right giving you access to the data ribbon you then need to undo the clip holding the data ribbon to the circuit board
3 now you have the dvd drive out take a not of what make and model it is then have a look on the auction site and buy the exact same type.

4 now you cant just replace the whole dvd drive with a new one as the dvd drive in your ps3 will only work with your ps3 so a new drive will not work on its won so you need to do the following.

5 remove the 4 screws from the bottom of the dvd drive if the circuit board is not visible on the bottom of the drive, if the circuit board is visible then undo the screws holding the circuit board to the dvd drive and then undo the data ribbons that run from the laser to this circuit board, once you have undone these make sure you dont break the thin black and red wire that is pushed into the dvd drive motor once this is uncliped you can remove this circuit board from the dvd drive

6 now when the new drive comes you need to repeat the process and take out the circuit board on the new drive and replace it with the circuit board from your old drive, doing this is the only way you can replace the drive without paying 150 toy sony to flash the firmware on the ps3 and the new drive so swapping this circuit board gets round this and allows you to do the repair yourself, if you dont swap this part over it wont work when you put it all back together you will just get a load of error so swapping this circuit board over is important.

you will also need a special start shaped tool to undo the bolt under the warranty sticker and rubber bung at one end of the ps3 once you have undone this screw it will allow you to slide the top off revealing all the screw you need to undo, now thats the easy part replacing the circuit board on the dvd drive is very fiddly so take your time and get it right.


if you need any further assistance give me a shout back as i repair these day in day out so i can more or less do it in my sleep, if you get stuck or need help give me a shout back and ill be glad to assist you further ok

please dont attempt this repair if you are unsure or dont mind the chance of doing more harm, its not easy to do and can be a nightmare if you get mixed up or lose parts, if you have any warranty left go on the sony site and lodge for repair, this may be covered by up to 3 years so check on the official ps3 site to find out if you have any warranty left.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks,.,.

Feb 02, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

My ps3 has been fine for over a year and now when i put a disc in it starts to read then it makes a click like your putting the disc in again and then it dont load


Ok ill tell you what you need to do,
1 try putting a standard music cd in the ps3 and see if that will play.
if it plays you need to get the bluray player replaced.
if it wont play music cd or standard dvd then this points to the fact either you have a dusty laser leans or it could mean the laser has give up and you need the whole drive replacing.

try going to hardware store and buying a cd leans cleaning cd and run this in your ps3 to remove any dust do this before taking your ps3 apart.

if you have any warranty left dont take it apart if your warranty has ran out ill tell you what to do.

first of all you need to take the case off the ps3 use google and type in how to repair ps3 then hit search this will list sites that tell you and show you how to take the ps3 apart doing this voids your warranty and will reduce the price when you come to sell it.
2 once its apart take out the dvd drive its held in only by 2 wires you pull the power wire out of the circuit board and tilt the drive to the right giving you access to the data ribbon you then need to undo the clip holding the data ribbon to the circuit board
3 now you have the dvd drive out take a not of what make and model it is then have a look on the auction site and buy the exact same type.

4 now you cant just replace the whole dvd drive with a new one as the dvd drive in your ps3 will only work with your ps3 so a new drive will not work on its won so you need to do the following.

5 remove the 4 screws from the bottom of the dvd drive if the circuit board is not visible on the bottom of the drive, if the circuit board is visible then undo the screws holding the circuit board to the dvd drive and then undo the data ribbons that run from the laser to this circuit board, once you have undone these make sure you dont break the thin black and red wire that is pushed into the dvd drive motor once this is uncliped you can remove this circuit board from the dvd drive

6 now when the new drive comes you need to repeat the process and take out the circuit board on the new drive and replace it with the circuit board from your old drive, doing this is the only way you can replace the drive without paying 150 toy sony to flash the firmware on the ps3 and the new drive so swapping this circuit board gets round this and allows you to do the repair yourself, if you dont swap this part over it wont work when you put it all back together you will just get a load of error so swapping this circuit board over is important.

you will also need a special start shaped tool to undo the bolt under the warranty sticker and rubber bung at one end of the ps3 once you have undone this screw it will allow you to slide the top off revealing all the screw you need to undo, now thats the easy part replacing the circuit board on the dvd drive is very fiddly so take your time and get it right.


if you need any further assistance give me a shout back as i repair these day in day out so i can more or less do it in my sleep, if you get stuck or need help give me a shout back and ill be glad to assist you further ok

please dont attempt this repair if you are unsure or dont mind the chance of doing more harm, its not easy to do and can be a nightmare if you get mixed up or lose parts, if you have any warranty left go on the sony site and lodge for repair, this may be covered by up to 3 years so check on the official ps3 site to find out if you have any warranty left.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks

Feb 02, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Will not read disc


Ok ill tell you what you need to do,
1 try putting a standard music cd in the ps3 and see if that will play.
if it plays you need to get the bluray player replaced.
if it wont play music cd or standard dvd then this points to the fact either you have a dusty laser leans or it could mean the laser has give up and you need the whole drive replacing.

try going to hardware store and buying a cd leans cleaning cd and run this in your ps3 to remove any dust do this before taking your ps3 apart.

if you have any warranty left dont take it apart if your warranty has ran out ill tell you what to do.

first of all you need to take the case off the ps3 use google and type in how to repair ps3 then hit search this will list sites that tell you and show you how to take the ps3 apart doing this voids your warranty and will reduce the price when you come to sell it.
2 once its apart take out the dvd drive its held in only by 2 wires you pull the power wire out of the circuit board and tilt the drive to the right giving you access to the data ribbon you then need to undo the clip holding the data ribbon to the circuit board
3 now you have the dvd drive out take a not of what make and model it is then have a look on the auction site and buy the exact same type.

4 now you cant just replace the whole dvd drive with a new one as the dvd drive in your ps3 will only work with your ps3 so a new drive will not work on its won so you need to do the following.

5 remove the 4 screws from the bottom of the dvd drive if the circuit board is not visible on the bottom of the drive, if the circuit board is visible then undo the screws holding the circuit board to the dvd drive and then undo the data ribbons that run from the laser to this circuit board, once you have undone these make sure you dont break the thin black and red wire that is pushed into the dvd drive motor once this is uncliped you can remove this circuit board from the dvd drive

6 now when the new drive comes you need to repeat the process and take out the circuit board on the new drive and replace it with the circuit board from your old drive, doing this is the only way you can replace the drive without paying 150 toy sony to flash the firmware on the ps3 and the new drive so swapping this circuit board gets round this and allows you to do the repair yourself, if you dont swap this part over it wont work when you put it all back together you will just get a load of error so swapping this circuit board over is important.

you will also need a special start shaped tool to undo the bolt under the warranty sticker and rubber bung at one end of the ps3 once you have undone this screw it will allow you to slide the top off revealing all the screw you need to undo, now thats the easy part replacing the circuit board on the dvd drive is very fiddly so take your time and get it right.


if you need any further assistance give me a shout back as i repair these day in day out so i can more or less do it in my sleep, if you get stuck or need help give me a shout back and ill be glad to assist you further ok

please dont attempt this repair if you are unsure or dont mind the chance of doing more harm, its not easy to do and can be a nightmare if you get mixed up or lose parts, if you have any warranty left go on the sony site and lodge for repair, this may be covered by up to 3 years so check on the official ps3 site to find out if you have any warranty left.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks

Dec 12, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

My playstation 3 is not playing the games or the blue ray disc, it will play regular dvd's


Ok ill tell you what you need to do,
1 try putting a standard music cd in the ps3 and see if that will play.
if it plays you need to get the bluray player replaced.
if it wont play music cd or standard dvd then this points to the fact either you have a dusty laser leans or it could mean the laser has give up and you need the whole drive replacing.

try going to hardware store and buying a cd leans cleaning cd and run this in your ps3 to remove any dust do this before taking your ps3 apart.

if you have any warranty left dont take it apart if your warranty has ran out ill tell you what to do.

first of all you need to take the case off the ps3 use google and type in how to repair ps3 then hit search this will list sites that tell you and show you how to take the ps3 apart doing this voids your warranty and will reduce the price when you come to sell it.
2 once its apart take out the dvd drive its held in only by 2 wires you pull the power wire out of the circuit board and tilt the drive to the right giving you access to the data ribbon you then need to undo the clip holding the data ribbon to the circuit board
3 now you have the dvd drive out take a not of what make and model it is then have a look on the auction site and buy the exact same type.

4 now you cant just replace the whole dvd drive with a new one as the dvd drive in your ps3 will only work with your ps3 so a new drive will not work on its won so you need to do the following.

5 remove the 4 screws from the bottom of the dvd drive if the circuit board is not visible on the bottom of the drive, if the circuit board is visible then undo the screws holding the circuit board to the dvd drive and then undo the data ribbons that run from the laser to this circuit board, once you have undone these make sure you dont break the thin black and red wire that is pushed into the dvd drive motor once this is uncliped you can remove this circuit board from the dvd drive

6 now when the new drive comes you need to repeat the process and take out the circuit board on the new drive and replace it with the circuit board from your old drive, doing this is the only way you can replace the drive without paying 150 toy sony to flash the firmware on the ps3 and the new drive so swapping this circuit board gets round this and allows you to do the repair yourself, if you dont swap this part over it wont work when you put it all back together you will just get a load of error so swapping this circuit board over is important.

you will also need a special start shaped tool to undo the bolt under the warranty sticker and rubber bung at one end of the ps3 once you have undone this screw it will allow you to slide the top off revealing all the screw you need to undo, now thats the easy part replacing the circuit board on the dvd drive is very fiddly so take your time and get it right.


if you need any further assistance give me a shout back as i repair these day in day out so i can more or less do it in my sleep, if you get stuck or need help give me a shout back and ill be glad to assist you further ok

please dont attempt this repair if you are unsure or dont mind the chance of doing more harm, its not easy to do and can be a nightmare if you get mixed up or lose parts, if you have any warranty left go on the sony site and lodge for repair, this may be covered by up to 3 years so check on the official ps3 site to find out if you have any warranty left.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks
,
,

Dec 12, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

My ps3 does not read disks anymore i need to get it fixed immediately


Ok ill tell you what you need to do,
1 try putting a standard music cd in the ps3 and see if that will play.
if it plays you need to get the bluray player replaced.
if it wont play music cd or standard dvd then this points to the fact either you have a dusty laser leans or it could mean the laser has give up and you need the whole drive replacing.

try going to hardware store and buying a cd leans cleaning cd and run this in your ps3 to remove any dust do this before taking your ps3 apart.

if you have any warranty left dont take it apart if your warranty has ran out ill tell you what to do.

first of all you need to take the case off the ps3 use google and type in how to repair ps3 then hit search this will list sites that tell you and show you how to take the ps3 apart doing this voids your warranty and will reduce the price when you come to sell it.
2 once its apart take out the dvd drive its held in only by 2 wires you pull the power wire out of the circuit board and tilt the drive to the right giving you access to the data ribbon you then need to undo the clip holding the data ribbon to the circuit board
3 now you have the dvd drive out take a not of what make and model it is then have a look on the auction site and buy the exact same type.

4 now you cant just replace the whole dvd drive with a new one as the dvd drive in your ps3 will only work with your ps3 so a new drive will not work on its won so you need to do the following.

5 remove the 4 screws from the bottom of the dvd drive if the circuit board is not visible on the bottom of the drive, if the circuit board is visible then undo the screws holding the circuit board to the dvd drive and then undo the data ribbons that run from the laser to this circuit board, once you have undone these make sure you dont break the thin black and red wire that is pushed into the dvd drive motor once this is uncliped you can remove this circuit board from the dvd drive

6 now when the new drive comes you need to repeat the process and take out the circuit board on the new drive and replace it with the circuit board from your old drive, doing this is the only way you can replace the drive without paying 150 toy sony to flash the firmware on the ps3 and the new drive so swapping this circuit board gets round this and allows you to do the repair yourself, if you dont swap this part over it wont work when you put it all back together you will just get a load of error so swapping this circuit board over is important.

you will also need a special start shaped tool to undo the bolt under the warranty sticker and rubber bung at one end of the ps3 once you have undone this screw it will allow you to slide the top off revealing all the screw you need to undo, now thats the easy part replacing the circuit board on the dvd drive is very fiddly so take your time and get it right.


if you need any further assistance give me a shout back as i repair these day in day out so i can more or less do it in my sleep, if you get stuck or need help give me a shout back and ill be glad to assist you further ok

please dont attempt this repair if you are unsure or dont mind the chance of doing more harm, its not easy to do and can be a nightmare if you get mixed up or lose parts, if you have any warranty left go on the sony site and lodge for repair, this may be covered by up to 3 years so check on the official ps3 site to find out if you have any warranty left.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks
,.,

Dec 12, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Disks wont read


Ok ill tell you what you need to do,
1 try putting a standard music cd in the ps3 and see if that will play.
if it plays you need to get the bluray player replaced.
if it wont play music cd or standard dvd then this points to the fact either you have a dusty laser leans or it could mean the laser has give up and you need the whole drive replacing.

try going to hardware store and buying a cd leans cleaning cd and run this in your ps3 to remove any dust do this before taking your ps3 apart.

if you have any warranty left dont take it apart if your warranty has ran out ill tell you what to do.

first of all you need to take the case off the ps3 use google and type in how to repair ps3 then hit search this will list sites that tell you and show you how to take the ps3 apart doing this voids your warranty and will reduce the price when you come to sell it.
2 once its apart take out the dvd drive its held in only by 2 wires you pull the power wire out of the circuit board and tilt the drive to the right giving you access to the data ribbon you then need to undo the clip holding the data ribbon to the circuit board
3 now you have the dvd drive out take a not of what make and model it is then have a look on the auction site and buy the exact same type.

4 now you cant just replace the whole dvd drive with a new one as the dvd drive in your ps3 will only work with your ps3 so a new drive will not work on its won so you need to do the following.

5 remove the 4 screws from the bottom of the dvd drive if the circuit board is not visible on the bottom of the drive, if the circuit board is visible then undo the screws holding the circuit board to the dvd drive and then undo the data ribbons that run from the laser to this circuit board, once you have undone these make sure you dont break the thin black and red wire that is pushed into the dvd drive motor once this is uncliped you can remove this circuit board from the dvd drive

6 now when the new drive comes you need to repeat the process and take out the circuit board on the new drive and replace it with the circuit board from your old drive, doing this is the only way you can replace the drive without paying 150 toy sony to flash the firmware on the ps3 and the new drive so swapping this circuit board gets round this and allows you to do the repair yourself, if you dont swap this part over it wont work when you put it all back together you will just get a load of error so swapping this circuit board over is important.

you will also need a special start shaped tool to undo the bolt under the warranty sticker and rubber bung at one end of the ps3 once you have undone this screw it will allow you to slide the top off revealing all the screw you need to undo, now thats the easy part replacing the circuit board on the dvd drive is very fiddly so take your time and get it right.


if you need any further assistance give me a shout back as i repair these day in day out so i can more or less do it in my sleep, if you get stuck or need help give me a shout back and ill be glad to assist you further ok

please dont attempt this repair if you are unsure or dont mind the chance of doing more harm, its not easy to do and can be a nightmare if you get mixed up or lose parts, if you have any warranty left go on the sony site and lodge for repair, this may be covered by up to 3 years so check on the official ps3 site to find out if you have any warranty left.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks

Dec 07, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

My sony play station stopped reading disc but still dose everything else what is wrong with it?


Ok ill tell you what you need to do,
1 try putting a standard music cd in the ps3 and see if that will play.
if it plays you need to get the bluray player replaced.
if it wont play music cd or standard dvd then this points to the fact either you have a dusty laser leans or it could mean the laser has give up and you need the whole drive replacing.

try going to hardware store and buying a cd leans cleaning cd and run this in your ps3 to remove any dust do this before taking your ps3 apart.

if you have any warranty left dont take it apart if your warranty has ran out ill tell you what to do.

first of all you need to take the case off the ps3 use google and type in how to repair ps3 then hit search this will list sites that tell you and show you how to take the ps3 apart doing this voids your warranty and will reduce the price when you come to sell it.
2 once its apart take out the dvd drive its held in only by 2 wires you pull the power wire out of the circuit board and tilt the drive to the right giving you access to the data ribbon you then need to undo the clip holding the data ribbon to the circuit board
3 now you have the dvd drive out take a not of what make and model it is then have a look on the auction site and buy the exact same type.

4 now you cant just replace the whole dvd drive with a new one as the dvd drive in your ps3 will only work with your ps3 so a new drive will not work on its won so you need to do the following.

5 remove the 4 screws from the bottom of the dvd drive if the circuit board is not visible on the bottom of the drive, if the circuit board is visible then undo the screws holding the circuit board to the dvd drive and then undo the data ribbons that run from the laser to this circuit board, once you have undone these make sure you dont break the thin black and red wire that is pushed into the dvd drive motor once this is uncliped you can remove this circuit board from the dvd drive

6 now when the new drive comes you need to repeat the process and take out the circuit board on the new drive and replace it with the circuit board from your old drive, doing this is the only way you can replace the drive without paying 150 toy sony to flash the firmware on the ps3 and the new drive so swapping this circuit board gets round this and allows you to do the repair yourself, if you dont swap this part over it wont work when you put it all back together you will just get a load of error so swapping this circuit board over is important.

you will also need a special start shaped tool to undo the bolt under the warranty sticker and rubber bung at one end of the ps3 once you have undone this screw it will allow you to slide the top off revealing all the screw you need to undo, now thats the easy part replacing the circuit board on the dvd drive is very fiddly so take your time and get it right.


if you need any further assistance give me a shout back as i repair these day in day out so i can more or less do it in my sleep, if you get stuck or need help give me a shout back and ill be glad to assist you further ok

please dont attempt this repair if you are unsure or dont mind the chance of doing more harm, its not easy to do and can be a nightmare if you get mixed up or lose parts, if you have any warranty left go on the sony site and lodge for repair, this may be covered by up to 3 years so check on the official ps3 site to find out if you have any warranty left.

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks

Dec 07, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

There is a single wire with a small 4 pin connector that is not connected in the tower on my GH22NP20 CD/DVD burner and I dont know what it plugs into.


that wire is for the analog out of the DVD/CD drive it can be connected to *********** board or sound card but is not required because most people use software that uses a digital signal

Nov 11, 2009 | LG GH22NP20 DVD±RW Dual Layer Burner

1 Answer

CD ROM DETECTION PROBLEM


LEAVE YOU hard drive on primary master port on your main board set as master or single drive ( IF YOU HAVE A STATA HARD DRIVE THEN DONT WORRY ABOUT THAT PART)

SET YOUR FIRST DRIVE AS MASTER
SET THE SECOND AS SECONDARY
use the jumber in the back of the drive to set them the propper setting is labeled on the drive it self

Connect them to the secondary port on your motherboard
so you should have

HARD DRIVE - MASTER OR SINGLE *jumper settiing* connected to the primary port on your main board

DRIVE 1 = MASTER *jumper settiing*
DRIVE 2 = SLAVE *jumpersetting*
connected to the secondary port on your mother board

IF YOU HAVE A SATA HARD DRIVE FORGET THE PARTS ABOUT HARD DRIVES ABOVE
i assumed you had a IDE hard drive

JUST USE THE SETTINGS FOR THE DRIVES and it should work :)

Dec 25, 2007 | Samsung (SH-M522C/BEBN) CD-RW/DVD-ROM...

1 Answer

Dvd probelems with samsung DvD-611


i put a dvd or a cd in the dvd player it say," loading" THEN it says "No Disc" BUT i known the cd or dvd dont be mess up so how can i fix this problem....Kindly reply me

Oct 30, 2007 | Samsung DVD-611 DVD Player

Not finding what you are looking for?
Toshiba Satellite C655-S5139 Notebook Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...