Question about Dryers

5 Answers

Harbor breeze ceiling fan

I installed a new ceiling fan 2 months ago. 1 month ago it started running very slow the capacitor was fried. I then got a replacement fan and within 2 hours the fan slowed down and the capacitor was extremely hot. what could the problem be?

Posted by on

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Harbor Breeze ceiling fans are cheap. I would suggest replacing it with a Hunter or a Casablanca.

Posted on Jul 10, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Your voltage is probably too low, probably a bad wire or source. Let me know if it worked.

Or take a look at the link given here... http://www.ceiling-fan-wizard.com/harbor-breeze-ceiling-fans.html

Posted on Nov 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,617 Answers

Probably have the wrong capacitor.

Posted on May 06, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 42 Answers
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check voltage at fan, should be between 110 and 125 volts

Posted on Aug 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag LDE412 Drum Roller keeps breaking


perhaps your dryer vent pipe is plugged with lint and causing the inner parts to overheat .

Feb 15, 2016 | Maytag Dryers

Tip

Keep your dryer running how it should and save money


service your dryer every 3 months if you use it 3/4 times a week 2 times a week every 6 months it is important easy to do yourself but make sure you turn the power off 1st depending on the make or model you need to get into the inside of your dryer and vac all the lint and dust out all around it builds up on the motor and heater fan if the motor fan gets blocked it will cause the dryer to stop and you will have to wait till it cools down for it will start again not good as the motor will burn out or could catch fire if you follow my advice your machine will last longer and work better

on Nov 06, 2011 | Hotpoint Dryers

1 Answer

This fan in the picture below I bought it less than six months ago and it stop working already. I notice the motor is a bit hot.


I think I answered you in another post. You plug it in, it doesn't turn and the motor feels hot? A hot motor isn't necessarily a problem, but if it's not turning and very hot, you probably need to replace the capacitor or the switch is somehow burned out. I would take it back to the store and just get a replacement.

Sep 30, 2014 | Dryers

1 Answer

Dryer making shuddering noise GE DPSR475GW0WW


Dear Mike:
I had the same problem with miner.
After listening to the shudder for several months, I opened the top up and put a tiny bit of grease (automotive) on the front of the drum where the slides are rubbing it. and the shuddering stopped.
That was 5 months ago. I have had to regrease it once, about 1 month ago.
Recommend only about a 1/2 teaspoon of grease, and wipe it on with your finger or a rag.
Be blessed

Feb 11, 2013 | Dryers

1 Answer

Have a kenmore electic dryer just changed out the heating element about 2 months ago dryer is not heating up properly taking 2 times to dry a load of clothes


check for a blockage in the evacuation hose (four inch tubing)
also, check to make sure the blower blades are turning (they can wear out and slip on the motor shaft). assuming the new element is still good, it is probably a blocking of air flow which will inhibit drying properly. or the blower fan blades are broken or worn. good luck. jay

Jan 04, 2010 | Kenmore Dryers

1 Answer

I have an similar problem with my Amana Dryer LEA30AW.


First Clean out your filter, Assuming the element is okay and cut-out are fine it should run okay, you could also try running it on low heat will take a bit longer but hey if it works great..Good luck

Oct 01, 2009 | Dryers

1 Answer

My dryer will not heat. I had this problem about 6 months ago. I have a res6745rq0 model.The thermostat was replaced and the fuse 6 months ago


try flipping you breaker off and on 2 or 3 times (hard and fast) if this don't work check element, timer , thermostats and safety switch on motor 2 heavy red wires (check wiring diagram for pin numbers of safety switch)....if this switch goes bad the motor will still run but it wont let power go to element

Aug 16, 2009 | Dryers

1 Answer

LEQ2152ES 2005 dryer shuts off when start us pushed


The belt can be replaced as follows.
1 remove top and front of dryer shell
2 belt goes around drum around motor pully then under tentioner wheel
3 replace front and top of dryer
(top pops off use a slotted screw driver)
Thanx for using Fixya Please take your time to rate me

Jun 14, 2009 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

My maytag dryer drum turns but the air will not get hot


Look insid door and get me the model number so I can help you better, Thanks, Sea Breeze

Mar 29, 2009 | Maytag Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

4,194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

66126 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...