Question about Akai LCT2660 26 in. HD-Ready LCD Television

1 Answer

Capacitators Where did you get this part from?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 367 Answers

I bought mine off Ebay.Radio Shack has some,but they didn't have the ones I needed,and they are more expensive.I hope this helps.If you have any other questions,please let me know.Thank You very much!

Tyler

Posted on Nov 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Powers on off. Red blinks 1 short 4 fast and repeats.


Good way to get electrocuted.. capacitor in the tv holds enough power the kill a person easily for weeks... take it to a pro

Sep 02, 2015 | Flat Panel Televisions

1 Answer

Led tv repair


I have the exact same problem on my samsung le40a552p3xxc version c03. Samsung uses bad capacitators on these models i think, which causes the power supply to fail after a few years. I hoped to find a mainboard, but as i read here, they dont make em anymore :s. Now i have to buy the equipment to fix this problem my own..wish me luck..Gonna change the first capacitators in my life :)

Apr 29, 2013 | Samsung Flat Panel Televisions

1 Answer

Capacitators on my tv, how do I access?


If its a flat panel LCD or Plasma unless you know how to solder and or have the skill to safely take it apart--leave it to an expert.

Apr 05, 2012 | Dell Flat Panel Televisions

2 Answers

Problems of capacitance with solution


What is meant by "capacitance with solution"?
What solution and for which question? Please refresh.

Feb 20, 2011 | Flat Panel Televisions

3 Answers

Can i replace a 300uf25v capasitor with a 50v.47uf capasitor in my polaroid tv


No they are not the same, you can go up on the voltage but not down, but you need to be very close or dead on the uf.

Jan 23, 2011 | Polaroid FLM-3201 Television

1 Answer

My Grunding LXW68-8510 26 TV does not switch on from standby - after several attempts through the remote, it will finally switch on. When the TV warms up, the problem is less acute. Thank you for...


The key seemed to be TV warms up. This could be contact resistance problem or capacitance dried up needs to be cured. You can repair it and change some parts. Or just live with it and see if it goes away(capacitance cured and switch contact resistance rubbed off by use)?

Oct 03, 2010 | Flat Panel Televisions

1 Answer

No picture, have sound to my tv


I've found a 19" flatscreen monitor that wouldnt come on a few weeks ago, I "googled" it and found that when you open it there are capacitators(caps) that have flat tops, on the youtube video it said that that was their problem, so i ran to Radioshack and got 2w new ones..5 minutes later its working like new!...the thing is is that you most likely have a few(or 1) bad capacitators. Im still researching a lot, but if you have the will you could open the unit all the way(take pictures to remember how it goes together, really not that hard) and check for capacitators that are not flat on the tops, replace those(same uf, but the volts have to be more then the one u removed!!) ,make sure the - side on the cap is going back into the same - place it was(if - and positive are backwards they will pop again at once. basically take some of the things I mention here and google them and you will be on yuor way. a cap (capacitator) could be broke(popped) on the video card, cousing bad video or no video, a cap could be popped on the sound area, causing the sound to act funny, a cap could be popped on the powerboard, causing electrical problems that vary widely. so calling a pro: he would open it check for popped caps, then he would charge you crazy amount for a whole board, just because its easier and faster then soldering your tv boards...i hoped i guided you somwhat....i bought my first nonworking 19 lcd tv for 20 and im on my way to google till its working lol...good luck! ps, pics of popped capacitators and how to remove them are on the web, i just hoped to guid you some more

Jan 18, 2010 | Element Electronics FLX-1910 19 in. LCD...

1 Answer

Tv wont turn on (wont stay turned on)


pls. check power coad is likage or luse canaction in plugh
if ok then problum is inside of tv so pls. cheked in pcb.....
1st : SMPS output voltage and 5v /12v/ 24v /135v dc filter capaciter cheked and replace 470/16v /1000/35v / 220/450v if any capaciter likage or sort * first cheked dyode.
2nd : EHT output line capasiter or dyode checked 4.7/250v /100/160v
and line coil or 1ohm register cheked
3rd : DT (driver transfermor ) and with cancting spear dry.
note: pls descanect tv with DVR and cheked tv set is turn on atlist 10min. minimum with any ather product (DVD , GAME BOX ,CABEL CANACTION) if is ok. then problum in DVB setup box .

Oct 04, 2009 | Samsung LN40A550 LCD TV

1 Answer

Samsung LCD TV proper capacitators


After searching through this site I found that replacing the 1000 uf 10V with 1000 uf 35V from radio shack has worked for others. I just tried it yesterday and I must say it works like a charm. For all that are weiry about attempting that don't worry it was very simple. I have never touched a solder or capacitors in my life and was able to complete the entire task in about an hour with no issues. Just search this site and others to get the proper methods for soldering and desoldering and it will be a breeze.

Jul 06, 2009 | Flat Panel Televisions

2 Answers

My 50 inch plasma


We have a 50 inch magnavox plasma screen. We found and used a fix from fixya! It only costs us $34.00 campared to the $300.00+
anyone wanted to look at it. The problem was on the powerboard but was two little capacitators with the model #3300 10v. We carefully took the back off the tv and removed the power board, went to a local electric supply store and bought the 2 parts for $2 each, we then found someone (tv repair shop!) to sauter the new ones on! Got it home put it back together and it stayed on, no depressing shutdown after a few seconds! you can find a picture of a fried capacitator on yahoo images, they are supposed to be flat but if defective will be bubbled at the top or even split! I am calling Magnavox today to complain that they are not recalling this part that should have been a better quality capacitator! Hope this helps some people!!

May 23, 2008 | Philips 50PF7320A 50 in. Plasma HDTV

Not finding what you are looking for?
Akai LCT2660 26 in. HD-Ready LCD Television Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

195 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Akai Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...