Question about Vision Fitness T9550 Folding Treadmill

Open Question

I have a Vision Fitness T9000. I press start and feel the belt start to move, but it's very resistant. Then I get the message "E1" Any advice would be welcome.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 26 Answers

SOURCE: I have the Vision Fitness treadmilll #T9450. When

Take the front cover off and see if the drive belt is on the motor. Try running it to see if the motor turns. This could be a motor or controller board problem.

Posted on Jun 16, 2010

jyackle5
  • 8197 Answers

SOURCE: How to fold Vision Fitness treadmill T9000

Sorry this model Treadmill does not fold up. You can get the manuals on the link below.

http://dl.owneriq.net/2/2f5f5d37-f094-4074-8b96-d6fe3bb59d27.pdf

http://dl.owneriq.net/a/af4a953c-36cd-490d-8215-4014994b6830.pdf

Good Luck

Posted on Jan 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message E1 on tempo 632t treadmill - what is it and how can I fix it ?


Hi There,

Tempo....check this lower control board for a small potentiometer or little square cube with a screwdriver slot in the top. Adjust this pot CW to 3/4 full turn and retry. Check feedback sensor(s). Does the belt move and then error and stop, or never start? These lower boards do fail and you can contact jatinah@rocketmail.com for more help if needed. Good Luck

Apr 11, 2017 | Exercise & Fitness

2 Answers

I have it all set up..programmed a work out...it starts to work..but the tread itself that you walk on wont run..what do I do?


From the User manual....here
http://servicedocuments.com/pdfs/_0005_SOLE/_0005_SOLE_01_Treadmills/003_OwnersManuals/2010_2011_SOLE/F63_F65_OM_810.pdf

'1.If the belt moves, but stops after a short time and
thedisplay shows "LS", run calibration. (on next page)
2.If you press start and the belt never moves, then
the display shows LS, contact service.

Sep 14, 2014 | Sole Fitness F63 Treadmill

1 Answer

My Vision Fitness T9450 is having a power issue. I plug it in, turn on the power button in the back, the console lights up as normal. Then when I press start the power goes out before the belt even st


you have a SHORT circuit maybe in the power supply, transform, capacitor, motor or lower board.
You must call some tech qualified, for to fix it.
see the block diagram.
God bless you
9_20_2012_11_42_40_am.gif

Sep 19, 2012 | Exercise & Fitness

1 Answer

Motor not going on York Optimum 60100 - after a while E 1 appears


Dear Sir:
This is probably a 1) faulty speed sensor or 2)the speed sensor is not plugged in properly. Its also possibly a 3) faulty motor control board or lower board 4) Main motor faulty. . The error codes will differ between makes and models but could be e1.You must test

see my personal TIPS for diagnose and troubleshooting.

See if you can run the software calibration for diagnose and trouble.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.

Mar 05, 2012 | York Exercise & Fitness

1 Answer

SOLE E95 "Ramp Error" Message


Thanks! It was the calibration!

But in order to get to calibration mode I had to press "Resistance Up" and "Start", not "Incline Up" and "Start"

Aug 07, 2011 | Exercise & Fitness

1 Answer

Hi i have a vision fitness 9450 hrt and i'm getting an error message: E6


Typically an E6 error message indicates that the machine needs to be recalibrated because the elevation motor is out of range or that you have a loose cable connection. Below are the auto calibration instructions. Please make sure that no one is on the machine because it will speed up quickly.


STEP 1 ENTER ENGINEERING MODE

With the safety key in place, hold "ELEVATION UP" and "SPEED

DOWN" buttons for 5 seconds. Software version will appear in display

window for a few seconds before model displays.

Press "STOP" , "ENG1" will appear in display window.

STEP 2 AUTO-CALIBRATE

Press "ELEVATION UP" until "ENG4" is displayed.

Press "SELECT" , display will read "AUTO".

Press "START". Unit will calibrate, when finished "END" appears in

display window, then "ENG1".

STEP 3 EXIT ENGINEERING
Press and hold "STOP" to exit engineering mode


I would also suggest that, with the power to the machine off, you check all of the wire connections underneath the motor cover, the assembly connection that sits where the mast meets the console and underneath the faceplate. Check to be sure that all of the connections are secure and that the pins within the cables are seated properly.


If you are still having any problems you can reach a knowledgeable Vision Fitness Representative toll free at 800-335-4348.

Mar 29, 2011 | Dmm Vision Fitness T9500 Treadmill

1 Answer

I have the Vision Fitness treadmilll #T9450. When


Take the front cover off and see if the drive belt is on the motor. Try running it to see if the motor turns. This could be a motor or controller board problem.

Jun 15, 2010 | Dmm Vision Fitness T9500 Treadmill

1 Answer

My vision fitness t9450hrt stopped mid run yesterday and the belt wont move..the inclene still works and everything else works fine i have took the cover off checked the drive belt from the motor and it is...


Use your multi meter check continuity on motor leads if you get about 1 to 1.5 ohms if not leads may have open. You may also need to do calibration if the above check a ok.

Apr 15, 2010 | Dmm Vision Fitness T9500 Treadmill

Not finding what you are looking for?
Vision Fitness T9550 Folding Treadmill Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vision Fitness Exercise & Fitness Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

14790 Answers

ray gallant

Level 3 Expert

42778 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Vision Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...