Error code 3507--I DID replace the black ink cartridge--it will not clear the error and print!

Steps to troubleshoot Epson Printer error code W-11
Step 1: Replace the printer cartridge
The very first step is to replace the cartridge. If you see that this error code remains as usual even after a replacement has been properly placed inside the printer then, the most probably it signifies that the cartridge was inaccurately installed. To replace the cartridge, perform the following instructions:
§The very first thing is that the Epson printer and its software will let users know when an ink cartridge is in low or expended state.
§If it is found that the ink cartridge is expended then, an automatic message will appear on the printer's LCD screen asking users to replace
§It will further perform a proper printing process, copying as well as the scanning in a smooth way.
§Make sure that you have kept the ink cartridges out of the reach of children.
§Keep a note that you won't be able to copy, scan or print whenever an ink cartridge is expended even if the other cartridges are not expended. So, it is recommended for users to replace the expended cartridges before copying, scanning, or printing process.
§Keep a track when you are working with Windows system to check whether black ink is low or there is more color ink than black ink. A user will get an error message when to print from their computer device.
§The next thing what a user needs to do is simply to save black ink by using a mixture of colors. This message will only appear if a user has selected the "Plain Paper/Bright White Paper" optionas the paper type and the "Text' as the Quality Option setting.
If you need any further help kindly visit us: Epson printer error code w 11
Toll-Free No: +1-888-633-7151

From http://www.refreshcartridges.co.uk/igloo/clearing-canon-pixma-error-message-e13-e16/

Locate the STOP/RESET/RESUME button on your printer which is represented by a triangle within a circle on the body of your printer and is usually in red, white or black as pictured below. With the reset button located hold it down for at least five seconds and then release it.

Are you sure it does not mean the black image units there is a difference toner cartridge and the image units.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

A B LED light denotes that the black ink cartridge is running low.
A C LED light denotes that the colour ink cartridge is running low.
If the alarm light is on (lightning bolt in a triangle) it should be accompanied by an error code.
Canon MP495 - Error Codes If the printer displays an error message, the following information should help to diagnose the problem.
The led screen on the printer will flash a letter E and will then be followed by two numbers:
Error Description More Info Error E02 The machine is out of paper or will not feed. Error E03 Paper jam or output tray is closed. More Info Error E04 The Cartridge cannot be recognised. More Info Error E05 The Cartridge cannot be recognised. More Info Error E07 Cartridge is not installed in the correct position. More Info Error E08 Ink absorber is almost full. More Info Error E13 The remaining ink level cannot be detected. More Info Error E14 The Cartridge cannot be recognised. More Info Error E15 The Cartridge cannot be recognised. More Info Error E16 The ink has run out. More Info Error P02 Carriage encoder error. More Info Error P03 Line feed error. More Info Error P07 The waste ink absorber is full. More Info Error P08 Print head fault. More Info Error P10 Print head fault. More Info Error 5100 Carriage Encoder error. More Info Error 5200 Print head fault. More Info Error 6000 Line feed error. More Info Error B200 Print head fault. More Info Error 5B00 The waste ink absorber is full.

Hi There
Your all-in-one printer is designed to stop printing before quality is compromised. Make sure you always use KODAK Ink Cartridges. Kodak is not responsible for the compatibility or performance of non-Kodak brand ink cartridges or refilled ink cartridges. To purchase KODAK Ink Cartridges, go to the KODAK Store.
To resolve the error, replace the black ink cartridge with a new cartridge:

1. Turn on your printer.
2. Open the access door. For printers with LCDs, follow the instructions on the LCD screen.
   
   NOTE: For ESP 3250 and ESP 5250 all-in-one printers, if the ink cartridges don't move to the center when you follow the instructions on the LCD screen, see Printhead and ink cartridges do not move to center with access door open.
   
3. When the printhead stops moving, pinch the latch on the black ink cartridge and lift it out of the printhead.
4. Remove the new black ink cartridge from its bag.
5. Remove the protective cap from the black ink cartridge.
   
   CAUTION: Insert the ink cartridge immediately to prevent the printhead from drying out.
   
6. Insert the black ink cartridge into the printhead.
7. Press down on the tab until you hear a click.
8. Close the access door. For printers with LCDs, follow the instructions on the LCD screen.
   
   NOTE: For more information on installing ink cartridges, see the Extended User Guide for your printer. Review Maintaining Your Printer - Replacing ink cartridges.

If the error continues, upgrade the firmware for your printer:

1. Press the Cancel button on your printer to clear the error message. (If the error does not clear, contact us.)
2. Upgrade the firmware for your printer:
   1. Locate and select the firmware download for your printer.
   2. Follow the instructions to install the firmware.
3. If the error continues, contact us.

Support Link :

Hi,

As per KODAK's recommendations,

If the error continues, upgrade the firmware for your printer:

1. Press the Cancel button on your printer to clear the error message. (If the error does not clear, contact KODAK.)
2. Upgrade the firmware for your printer:
   1. Locate and select the firmware download for your printer.
   2. Follow the instructions to install the firmware.
3. If the error continues, contact KODAK.

These steps are part of KODAK's Error: "Black ink cartridge needs replacing" (3507) page.



I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!
Mongkey
DELL Tech ID #456563
TIPS: Is your computer slow? This might help
http://www.fixya.com/support/r8158906-diy_manual_pc_tune_up
(for Windows only)

Canon printer error code 5200 is a technological malfunction that stops printing of a canon printer. The error is registered on the screen when the temperature of the ink cartridge is high. There are no concentrations of ink present on the ink cartridges. The print head of the printer is also heated by a temperature rise resulting in an error code of 5200. Canon Printer Error 5200 Few troubleshooting steps are explained below. These troubleshooting steps are so basic that they can be performed by anybody with enough guidance. But if, in any case, someone is unable to comprehend these troubleshooting acts, assistance from trained experts is needed.

Canon printer error code 5200 is largely due to cartridge problems. This can be due to a low amount of ink in your cartridge, a faulty cartridge, or maybe there are some flaws with the logic board of your printer. We realize that Canon printers are designed to be printed in black, even if the Black cartridge is empty, using colors in the ink cartridge. Thus, if you see a mistake of 5200 in the Canon printer, the printer cartridges are either empty or near to empty. Now that you know the root of the error, let's talk about the solutions.

Our Services: You may find that the Canon printer error code 5200 has been deleted after the above information has been completed. But if you still get the same error code on your computer screen when printing, you can contact Our Printer Error Specialist now.

Check given blog.

printer did not tell about empty cartrigde it just showed that the black was low but not empty -- decided to replace the cartridge early and that ficed the problem!! ?????

Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print head consumes ink, so perform print head cleaning only when necessary.

Hope this initial info/idea helps.

How do I resolve the error message "Calibration Page Not Found"? Error code: 3610 Question : How do I resolve the error message "Calibration Page Not Found"?
Answer : To resolve this error condition, correctly position a calibration page on the scanner. See the User's Guide for more information. How do I resolve the error message "Cover open"? error code : 3501 Question : How do I resolve the error message "Cover open"? Answer : To resolve this error condition, close the access door. The printer will not operate while the door is open. How do I resolve the error message "Color ink cartridge missing or not installed correctly"? Error Codes : 3511 Question :
How do I resolve the error message "Color ink cartridge missing or not installed correctly"?
Answer :
To resolve this error condition, reinstall the ink cartridge:

1. Remove the color ink cartridge:
   1. Open the printer access door by lifting from the front center of the unit.
   2. Wait until the printhead is idle and silent, then pinch the latch on the color ink cartridge with your thumb and forefinger and lift it out of the printhead.
2. Check the two electrical contacts on the ink cartridge for small marks, which should appear if the cartridge was installed correctly.
   
   If the electrical contacts do not have small marks:
   1. Reinstall the ink cartridge, making sure you press down on it until it clicks into position.
   2. Remove the color ink cartridge, then check the two electrical contacts on the ink cartridge again for small marks. Repeat if necessary.
   3. Reinstall the ink cartridge.
      
3. Close the printer access door.

NOTE: See the User's Guide for more information about removing and installing the ink cartridge.
If the error persists:

1. In the KODAK All-in-One Home Center, select the Help (?) icon.
2. Select Maintenance.
3. Select Firmware Upgrade, then follow the prompts to download the latest version of firmware, free of charge.

From Kodak support:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=9104/7269&pq-locale=en_US

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309