I have a new Craftmade Epic Ceiling fan DCEP70 with a Fanimation TE32WH reversible fan & light control. Cannot get fan to work. will slightly turn then stop. Checked dip switches. What could be problem.

This is probably the 12 volt battery you are looking for.. a 4 pack for around four bucks...

click here...
https://www.ebay.com/itm/4-PACK-Battery-23A-A23-Hunter-home-ceiling-fan-light-remote-control-USA-Seller/151207218205?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D486f80c855644b7a80cd3a611fd27e87%26pid%3D100005%26rk%3D1%26rkt%3D12%26sd%3D201017699380%26itm%3D151207218205&_trksid=p2047675.c100005.m1851

If your sure it is powered from the wall switch, then your more likely to have a bad capacitor for the fan or a wire has loosened under the fan.

Probably under the canopy cover at the ceiling.

Check to make sure your fan is set on the high speed & the light is at the on possition with the pull chains.

Never heard of this fan & that is not a Fanimation model number.
Call Fanimation at 1-888-567-2055.

does it have a manual shut off switch to the lights?

SOunds to me like you have a bad wiring connection in the fan unit, have someone check out all the connections, both between the fan and ceiling and the fan and light unit.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

are you sure theres not a switch on the fan body ,, up/down= summer / winter...There should be

looking for a manual for a craftmatic sewingmachine pretty old but hopefully there is still some out there

Not sure if this addresses your problem or not, but with my Minka Aire ceiling fans, the fan has to be moving in order to change the fan direction. Turn the fan on (any speed works), then push the reverse button. The fan will speed up to max, then you'll hear the gears switching. The fan will slow to a stop, change directions and get back up to speed in the new direction.