Question about Panasonic TC-P42G10 Plasma TV

2 Answers

Tv does not come on. when it powers it blinks 11 times? what might this be?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,623 Answers

Are you certain its 11 blinks?

Posted on Mar 21, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Panasonic Plasma TVs have built in fault diagnosing circuit. If any fault occur with any circuit board inside, the loaded firmware will detect it, and will give you its idication in the form or standby light blinks. From the number of blinks at one time, expereinced service technicians can detect the faulty section [circuit board], without opening the TV. This will help technicans to detect and repair faulty section fast.

Here are some hints about the number of blinks to Pansonic Plasma TVs.

PANSONIC PLASMA TV: MODEL NO: X24 _ C2 _ U2 _ S2 _ G20 _ G25 _ VT20 & VT25

Switch ON the set by its main power ON/OFF swith at its front panel [not with remote control], and count the number of blinks occur before the set shuts down.

2 Blinks: 15V SOS D_BOARD / P-BOARD.

3 Blinks: 3.3V SOS D BOARD.

4 Blinks: POWER SOS P-BOARD.

5 Blinks 5V SOS D-BOARD.

6 Blinks DRIVER SOS 1 SC BOARD OR D-SC FPC SC ENERGY RECOVERY CIRCUIT _ D-SC FPC DET.

7 Blinks: DRIVER SOS 2 SU-BOARD / SD BOARD / SU or SD CONNECTOR DET / SU or SD SCAN AND LOGIC IC.

8 Blinks: DRIVER SOS 3 SS- BOARD or SS-2 BOARD / SS FPC DET / SS ENERGY RECOVERY UNIT.

9 Blinks: Discharge Control SOS D-Board.

10 Blinks: Sub 5V SOS/Sub 3.3V SOS A-Board / SC-Board / SS-Board / P-Board / MIHO 3.3 SOS / LED 8V SOS.

11 Blinks: Fan SOS A-Board or Fan fault.

12 Blinks: Sound SOS A-Board or speaker fault.

Count the number of blinks very accurately. Switch the TV OFF and ON; at least two times and cound the number for confirmation.

Posted on Dec 01, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic TH-46PZ850U 46 in, red light is blinking 11 times in a row, tv will not power on.


These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/

Dec 07, 2013 | Panasonic TH-46PZ850U 46 in. HDTV Plasma...

1 Answer

Panasonic Viera TH-42PV500A blinks 11 times after turning off by itself


go to Menu, AND restore to the factory default. Read your owner manual or download from www.fitness.manualsonline.com +
www.retrevo.com
If the problem persist, you have problem with the power supply circuit. You must go to the repair shop TV for fix it.
God bless you

Jul 20, 2013 | Televison & Video

1 Answer

My tv automatically shuts off then power button flashes 11 times. Can't get tv turned back on


11 blinks Fan SOS PB Board. Either the cooling fan or its control board is faulty. You have to check and locate which one has the fault. Check this link and select the site mamed 'Electro-help' for more details.


Jul 04, 2012 | Panasonic Viera TH-42PZ80U Plasma TV

1 Answer

WHY MY panasonic tc-50ps14 IS BLINKING A RED LIGHT 11 TIMES AND HOW I CAN FIX IT?


I have a 10 blinks and 12 blinks for that set, 10 says it possible SC board, and 12 says

Unplug the TV and disconnect connector A11 from the A board. Plug in the TV and press the power switch

Does the TV power up and

stay on?

No

Yes

If the speakers wires

are not pinched,

Replace

the speaker

Replace
the A board

Jan 16, 2011 | Panasonic TC50PS14 Plasma TV

1 Answer

My Panasonic Plasma Tv is not turning on. it tries but the red light on the front of the tv starts blinking 11 times then pauses the blinks 11 more times. I can fix it and i think that it is a code for...


Ur power supply board it dead.Take the tv aparts.U have tools,like soldering iron and solders? U know basic soldering and electronics?U can look around all the boards for those capacitors that bulges,pup up replaced these capacitors should get ur power back.Or tries these Websites Shopjimmy.com or Ebay.com to buy a whole refurbish power supply to replaced.

Apr 16, 2010 | Panasonic TH-37PD25U/P 37 in. EDTV-Ready...

1 Answer

We just moved the tv into our new home, when we plugged it in and turned it on nothing happens.. no picture or sound, the timer/standby red light blinks 11 times then nothing. We have tried powering it on...


Well I think what has happened is that the move has caused a failure, it well may have been bumped or jostled, these units are VERY delicate, and should NEVER be moved without using the protective crating, they came that no-one keeps, for any transport, (It is absolutely imperative that you keep your packaging these days as it should NEVER ever be moved without putting it back into that packaging for travel) they really do NOT travel well at all. This what you describe is a classic situation, we see it all the time in my shop. You have little option but to get a "Quote" for a repair. this is indeed unfortunate, but all too common from "shifted" item. Especially TV's.

Mar 22, 2010 | Televison & Video

1 Answer

Sony FD Trinitron WEGA Tv - LAMP blinking 11 times


Sony tv has self protection program. The red Led blinking light indicate the probable cause location. For this model it is either 2,4 or 5 flashes every 3 second. Please check the blinking again

Feb 09, 2010 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

TV won't turn on, standby LED starts blinking


HI, this is the result of an unstable power sector in this unit. the fly back is malfunctioning and, you will need to replace it asap. i will list the part number below and a link to a site as well. you can purchase this part on-line if you wish.

FBT ASSY NX-4521//X4
Sony Part Number: 1-453-310-11

CLICK HERE TO ORDER

Jun 21, 2009 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Sony tv kv24ls35u 11 blinks


Sony does not have 11 blink code it only goes to 10 blinks. You can Try self-Diagnostic mode- Press---- display,5,vol- then power when set comes up it should have codes telling you which circuit has problem.

Jan 03, 2009 | Sony KP43T75GRAY 43" Rear Projection...

2 Answers

Shut off blinks 11 times


I have recently solved the same problem with my panasonic that was just 2years 2months old. I took off the back of the tv and brush off the dust as there was too much dust clogging the vents and fans at the back. The tv is now as good as new. Hope your luck is as good as mine. by the way i was having 11 blinks as well.

Jan 29, 2008 | Panasonic TH-42PD50U 42 in. Plasma EDTV

Not finding what you are looking for?
Panasonic TC-P42G10 Plasma TV Logo

756 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2317 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...