Question about LG RU-42PZ71 42 in. EDTV-Ready Plasma Television

2 Answers

I need to find a stand or base unit for a table that will support a LG ru-42pz71 plasma tv. Where can I find or order one? OEM preferred.

Posted by on

  • 1 more comment 
  • starkjt Mar 22, 2011

    Your generic response provided limited results. Please research and provide an OEM part number for a LG ru-42pz71 plasma tv. I am looking for a base stand (pedestal) that came with the tv when purchased new.



    A link to a supplier that can provide a OEM part would be very helpful. Once again, please provide a part number and link to a supplier that can provide the part(s).



    Thanks for your endeavors,



    John

  • starkjt Mar 23, 2011

    Good Morning BElectric,



    I reside in Plano, TX. Thanks for the research that you've provided. The used stand that sells for $64.99 may be the product that I purchase. But before I do:



    You stated that you would confirm the part number and get back to me. Please do that, it's very important. I am also concerned that the 42PZ61 and the 42PZ71 bases actually are interchangeable. Can you confirm that 100%?



    Thank-you for your support and I await your response,



    John

    Plano, TX

  • starkjt Mar 23, 2011

    The solution was very helpful! Good job BElectric! Your demeanor and thoroughness is very much appreciated.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,140 Answers

Hello John,

It's very difficult to obtain OEM stands for older TVs. This stand has been out of production for several years and new ones are more or less impossible to get.

The service manual lists the part number as 3501V00166B, but searches for this part show this number to be something entirely different. I believe the correct part number to be 4950V00146 but I'm still waiting for confirmation on this. I will let you know as soon as I have confirmed 100%.

I don't want to spend too much time locating suppliers without knowing your location. If you are in the US, the following supplier has the item in stock:

http://www.retechtv.com/products/lg-ru-42pz61-tabletop-base-pedestal-stand
Contact: 1-888-294-4051
Price: $64.99 + shipping

The part is listed for the RU-42PZ61, but the PZ71 uses the exact same stand. I have verified this before posting and you would not be able to tell the two models apart if you stood them side-by-side.

I have confirmed with RetechTV that the item is in stock, but they did inform me that the stand is used and has some minor cosmetic damage (scuffs / light scratches). If you would like more information on the actual condition, please contact RetechTV on the number above.

I did find one more, but it looks in poor condition from the images provided:

http://www.discount-merchant.com/LG-PLASMA-TV-STAND-RU-42PZ61-p/50002466.htm
Contact: 1-800-281-8860
Price: $41.97 + shipping (in-stock)

If you are outside of the US and/or you would like me to find alternative suppliers, please let me know your location and I will try to find a supplier in your country. I think your chances of locating a new stand are pretty slim, but there are new (non-OEM) stands available which attach to the VESA wall-mount fixings on the back of the TV.

Hope this helps. If you need further assistance, please let me know by clicking on "Add a Comment" below your question.

Regards,
BElectric

Posted on Mar 22, 2011

  • DILLIGAF
    DILLIGAF Mar 22, 2011

    Hi John,



    Further research confirms 3501V00166B is the correct part number. My confusion was due to the part being listed with the description of "Board Assembly". This is also listed in some places as AP-42DA70.



    Again, if you are in the US, the part can be ordered new from one of the official LG parts distributors listed below. (Not cheap though!)



    Western U.S. - Andrews Electronics

    http://lge.andrewselectronics.com/search...

    Price: $276.98 + shipping

    Phone: 1-877-389-6384

    E-mail: lgorders@andrewselectronics.com



    Central U.S. - MCM Electronics

    http://www.mcmelectronics.com/product/35...

    Price: $256.10 + shipping

    Phone: 1-888-235-4692 or 1-800-824-9491



    Eastern U.S. - Encompass Parts Distribution

    https://www.encompassparts.com/webwiz/ww...

    Price: $262.04 + shipping

    Phone: 1-800-638-3328 or 1-800-432-8542 or 1-866-779-7906



    You may be able to find other suppliers using the correct part number but, I'd stick with the official distributors. Considering the price of a new stand, you may want to enquire about the used stand I provided details for in my previous message.



    Hopefully, this will solve your problem. If you are not in the U.S. please let me know your location and I will try to locate supplier/s in your country. Please also let me know whether you want only new or would consider a used stand if it's in good condition.



    Regards,

    BElectric

  • DILLIGAF
    DILLIGAF Mar 23, 2011

    Hello John,



    I already confirmed the part number in the second message I wrote above this one. I guess you may not have seen that one? The correct part number is 3501V00166B. I am 101% definite on that and also that the stands for the PZ61 and PZ71 are the same item and are interchangable.



    As you are in the US, all of the supplier details are relevant for you, but if you need me to look for more, please let me know. I think I pretty much exhausted the suppliers already though!



    Regards,

    BElectric


×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,622 Answers

Hi, you can purcahse allkinds of plasma TV stands from a lot of sites

http://koford.en.made-in-china.com/

and

eBay.com

and

amazon.com and a lots more ..

All you need do is select a category and just type in what ever you want .. Your done. shipping requirements are all there.

Good luck...

Posted on Mar 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a wall-mounted Panasonic TH-42PX50U plasma that now needs to be placed on a table unit but the original pedestal stand has been discarded! Are those items available?


Hello

You can get a TV stand at any electronic store close to you or you can call panasonic and order for a TV stand directly from them

Jun 09, 2011 | Televison & Video

1 Answer

Need a table top stand for a LG 15" (model


Tries websites like Amazon.com,Ebay.com to buy a new or used base stand for ur tv.

Dec 08, 2010 | LG 15LC1RB 15 in. LCD Television

2 Answers

LG RU-42PX10C Plasma TV picture had colored lines & went black...


This will be your Y SUSTAIN board on the left hand side when you take the back off.
Plenty available on ebay, Very easy fix

Mar 05, 2010 | LG RU-42PX10 42 in. HD-Ready Plasma...

1 Answer

RU-42PZ71 displays red lines


No, you will need to call an engineer to check the display, this sounds like a fault either with the main board or very possibly (and most likely) a fault with the screen which would mean replacing the screen

Dec 18, 2009 | LG RU-42PZ71 42 in. EDTV-Ready Plasma...

1 Answer

LG 42PZ71 this has been a great set, but it has very low hours on it and the other day I turned it on to wierd color static of some sort. when I switch to different inputs i get bands of static to the...


This could be a firmware problem if the menu doesnt appear. You can get firmware updates for LG. You simply load the firmwareonto a USB stick and plug into the HDMI port then follow screen instructions..BUT DO NOT REMOVE STICK UNTIL FLASH HAS COMPLETED ELSE YOUR TV WILL BE RENDERED AS JUNK |o|

Aug 02, 2009 | LG RU-42PZ71 42 in. EDTV-Ready Plasma...

1 Answer

Absolutely no video.


Mainboard damaged and need to be replaced, try EBAY for a general picture of prices but you will need your product code wich is located in the back of the TV next to serial number.

May 17, 2009 | LG RU-42PZ71 42 in. EDTV-Ready Plasma...

1 Answer

Samsung 4235X/XAA older Plasma TV Need to take the base out for m


GENTILITY lay that set face down on a table covered with a thick blanket. There should be 4 long threaded bolts near the bottom that fasten the legs of the stand inside the framework of the set.. Remove these and the stand should slide right out.

www.mcveyelectronics.com

Apr 11, 2009 | Samsung SPN4235 42 in. Plasma HDTV

2 Answers

LG Plasma TV RU-42PZ61 vertical bars of all colors


sounds like your deflection circuit is weak..seems a power supply issue is at hand..what documentation do you have in your possession?

Mar 29, 2008 | LG RU-42PZ61 42 in. HD-Ready Plasma...

Not finding what you are looking for?
LG RU-42PZ71 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74473 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...