Question about Sanyo Microwave Ovens

1 Answer

Microwave works but is not heating anything. microwave model is EM-S1567S UK2

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,909 Answers

It sounds like the magnetron may have either failed or is not being supplied with the extremely high voltage required to run it.

YOUR SAFETY IS PARAMOUNT

This is a job for a professional but if you are safety clued up, here's instruction.
Make sure the !!!!any capacitors are discharged!!!!! before attempting any sort of repair.
Check the door interlock switches first then the high voltage diode with either an AVO model 8 or moving coil meter on high resistance range for short circuit, (DVM's won't show the fault!), the capacitor can fail and go short circuit, the feed fuse on the primary of the high voltage transformer and then finally, the magnetron is best checked by substitution.
Hope that helps.

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Model em-p672w. What caused it to stop working?


Sanyo EM-P672W Microwave Oven Repair Questions ...

www.fixya.com > Forum > Microwave Ovens > Sanyo
Recent Sanyo EM-P672W Microwave Oven questions, problems & answers. ... Mysanyo super shower microwave wave stopped working it shows on the display to press clock key but ... What would cause my Sanyo Microwave to not heat up?

Sanyo EM-P672W Microwave Oven Sanyo microwave fuse ...


Nov 19, 2015 | Sanyo Microwave Microwave Oven

1 Answer

How to preheat my new microwave model EM-C5796V of sanyo


you really don't pre-heat a microwave. set it for the time you want to cook and it reaches the temperature for cooking almost instantly

Sep 27, 2010 | Sanyo EM-Z2100GS Microwave Oven

1 Answer

Sanyo microwave model em-s5002w won't heat...sounds louder


Sounds like a component failure in the microwave circuit.

It will be one or more of the following -

Fuse
Diode
Capacitor
Transformer
Magnetron

Reply back and I can help you more. These failures happens to new or old microwaves.

Feb 01, 2009 | Microwave Ovens

2 Answers

Microwave not heating food


Hi there,

I have exactly the same problem - strange and annoying! Did you manage to fix it?

Cheers,

Ben

Nov 15, 2008 | Sanyo Microwave Ovens

1 Answer

I have a Sanyo microwave oven Model EM-C8787B UK2. I purchased it on May 23rd 2008. At first I used only the microwave element and whilst I found the door didn't open easily I managed it. However I...


Since it's less than one year old, it should be fully covered under warranty. I'd suggest contacting the manufacturer to get it fixed free.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Aug 04, 2008 | Sanyo Microwave Ovens

1 Answer

Sanyo microwave mod # EM-2100GS


unscrew the unit replace fuse near the transformer. this fuse is for heating....

Feb 02, 2008 | Sanyo EM-Z2100GS Microwave Oven

1 Answer

EM-P672W


Is anything working? Light when you open door? Is your area prone to have Voltage Surges? Did anything else in your home fail at the same time? These may sound like DUMB questions, but they are necessary.
If the light comes on when door is opened then the FUSE is ok. If the light comes on, but nothing else, you have lose a Control Panel. Perhaps from power surges.

Jan 27, 2008 | Sanyo EM-P672W Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

tony denham

Level 1 Expert

32 Answers

Are you a Sanyo Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...