Require instruction manual to re set the clock on acctim led model number 13917

Travel alarm clocks can have varying instructions, depending on the type of clock you are using. Here are some tips for use that will apply to any alarm clock.

1. Power source
   • Travel alarm clocks will need to have some sort of power source. Depending on the type of alarm clock, it might be battery-powered or it might have a cord that needs to be plugged in. Battery-powered alarm clocks can take mini watch batteries, AAA batteries or sometimes AA batteries. Travel alarm clocks, because of their tiny size, usually have the small batteries that need to be bought from a watch store or a dollar store. Before you leave, make sure you have a working power source and can turn it on.
     
   Changing the time
   • After you reach your final destination, power the alarm clock on. Now you'll need to set the time and date correctly. Check a watch, cell phone or television to get the exact time and locate the buttons or dials on your alarm clock. On some, there will be a "time" or an "hour" button you need to press and hold to activate the alarm time change. While you are holding it down, turn the dial, press the hour button or press the (+) button until you notice a time change. On others, simply pressing the hour or minute button will let you change the time shown.
     
   Setting AM/PM
   • The AM/PM option is critical in setting your alarm clock correctly. Make sure the LCD display on your clock has a light beside the correct AM or PM setting, or look for the letters AM or PM on the display. If you get this wrong, the alarm won't go off in the morning!
     
   Setting alarm time
   • To set the alarm time, look for a button or a switch that says alarm. If there is a switch, move it to the alarm setting. If it is a button, you'll need to hold it down until the time starts flashing, signaling time to change the hours and minutes to the desired alarm time, or hold it down while you press the hours and minutes buttons to reach the alarm time you want.
     
   Turn alarm on
   • Now double-check that your regular and alarm times are correct by switching the switch back and forth again, or by pressing the alarm/time buttons long enough to read the time set. There should be a picture of a bell somewhere on your LCD display showing that the alarm is set to "on." If there isn't, look for the on/off alarm button and move it to the correct position.
     
   Music options
   • The last step is finding the alarm wake-up option. Not all travel alarm clocks have this option, but if yours does there will be a switch or button that lets you choose to wake up by a buzzer, the radio, a CD, or another device.
     

Read more: Travel Alarm Clock Instructions ' eHow.com http://www.ehow.com/way_5250617_travel-alarm-clock-instructions.html#ixzz1YfneKhGw

http://www.ehow.com/how_5147659_set-time-sioscan-clock.html

is this similar?

I actually have one of these. Pull the back cover.it might be in there.otherwise i can email you pictures of mine

Good afternoon,

Equity has the instructions on their support page, but no actual instruction sheet is available:

http://www.equitybylacrosse.com/i-need-instruction-manual-my-model-40001-clock

Hope this helps! Please rate this solution.

Thanks,

~PCF

For most clocks of the RCA clocks without a clock or time set button, press Set until you see the clock icon. Press the fwd or rev button to change the time. Release the button when you reach the correct time. (AM or PM will be indicated next to the time.)

There are manuals for several RCA cd clock radios available from their site: http://support.rcaaudiovideo.com/select.aspx?u=manual . Check if your specific model is listed in the menus.

I hope this helps.

Cindy Wells

Here is the 4 page manual:
http://www.bbtradesales.com/pdf_conversion.php?url=http://www.bbtradesales.com/print_2_0.php?id=4509

Thanks for choosing FixYa,

Kelly

The Sio/Scan Atomic clocks should automatically set the time and date.

Place the clock in a window facing towards Colorado and give it 24 hrs to update

If that fails here's the web site for them:

 

http://www.skyscaninfo.com/content/manuals.html

Go to the Source.ca look for this clock, model number.Go to the parts section and download the instructions in french or english.I just looked so i know this works.

Hi, First check the both channel of clock and thermometer (you can see the controler in battery insertion of thermometer and you can set up channel by pressing ch button on the clock)
Next press F/C search button until the clock find thermometer and press F/C search button again.

I bought a Caixing CX-2158 led digital clock in Thailand and there aren't any instructions to operate it eg; set time alarm etc. Can you help please? Philippines Thank you in anticipation.