Question about Furuno GP1650DF GPS Receiver

2 Answers

My unit will power up, display the disclaimer, and go to the menu screen by default. At this point, I have to disconnect from the power souce to power down.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,080 Answers

First of all, here is the main ONLINE SUPPORT page for your model:

http://www.furunousa.com/products/productdetail.aspx?product=GP1650DF&category=Products+%3A+Previous+Products+%3A+GPS+%26+Chart+Plotters+%3A+Fish+Finder+%2F+Chart+Plotter+Combos


And here is a direct link to the ONLINE USER'S MANUAL for that model:

http://www.furunousa.com/ProductDocuments/GP1650F-DF%20Operator's%20Manual%20Version%20M.pdf


And here is a direct link to the INSTALLATION MANUAL for that product:

http://www.furunousa.com/ProductDocuments/GP1650F-GP1650DF%20Installation%20Manual%20%20n.pdf


To view the Support Page or the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated or the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents. You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there.

See page 1-2 of the ONLINE USER'S MANUAL for detailed instructions on how to power off the machine by HOLDING DOWN the POWER / BRILL button in the lower left hand corner of the unit's face.

Please comment back here to this page if you have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.

Thank you very much and good luck.

Posted on Mar 23, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 255 Answers

This problem could be due to lack of proper installation of your device.Check its settings and see if they are your desired settings or not.

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not have sound


If you have just lost sound and the TV has displayed no other problems, Try the fallowing.
Disconnect from power source for 20 minutes and allow to completely cool down. ( Note, you will need to totally disconnect the Power )
Disconnect any external devices
Power the unit on and enter the menu setting.
Look for reset unit to factory defaults. ( If you have that in the menu )

If this works after sitting, your all set.
If this does not work and you still have no sound, you may have a power supply problem and will need to be serviced.

May 27, 2014 | Pioneer PureVision Pro-1000HD 50 in....

Tip

ERROR CODE AND SERVICE MODE


Service tool modeHow to access
1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.
Display of SOS History
SOS History (Number of LED blinking) indication. From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory shipment setting].POWER ON TIME/COUNT
Note : To display TIME/COUNT menu, highlight position, then press MUTE for (3sec).
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.Exit
1. Disconnect the AC cord from wall outlet.
Hotel mode
1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu In order to display the Hotel mode setup menu, please enter the following command(within 2 second).
[TV] : Vol. [Down] + [REMOTE] : INPUT (3 times)
Then, the Hotel mode setup menu is displayed.
3. To exit the Hotel mode setup menu Disconnect AC power cord from wall outlet.
Troubleshooting Guide
Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timingCheck of the IIC bus linesHow to access
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more than 3 seconds.
Exit
Disconnect the AC cord from wall outlet.
Power LED Blinking timing chart
1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.

FOR MODE DETAILS CHECK THE FOLLOWING LINK

www.electro-medical.blogspot.com
google.com/+AjinGopakumar

USE SEARCH TAB TO FIND MODELS OR USE DROP DOWN MENU

on Jun 30, 2015 | Panasonic Tc-50ps14 Tv Power Supply Board...

1 Answer

I do not know the passcode for my phone



Resetting Phone Settings

Resetting the device restores all of the factory defaults,including the ringer types and display settings.Onboard data such as Contacts, History, Scheduler,and Messaging are not affected.


  1. Press Home and touch Main > Settings > Reset> Reset Settings. (A disclaimer is displayed.)
  2. Read the disclaimer, write down the lock code, and touch Proceed.
  3. Enter the lock code provided on the disclaimer by using the onscreen dial pad.
  4. Touch Done to reset the device's settings.


Resetting Phone

Resetting the device restores all of the factory defaults,including the ringer types and display settings and deletes all content stored on the phone.


  1. Press Home and touch Main > Settings > Reset> Reset Phone. (A disclaimer is displayed.)
  2. Read the disclaimer, write down the lock code, and touch Proceed.
  3. Enter the lock code provided on the disclaimer by using the onscreen dial pad.
  4. Touch Done to restore all factory settings.
Warning!: While reset/restore operation under process, you are advised not to remove your battery until the operation is completed and cellphone restarts otherwise phone damage may occur.*Disclaimer:Performing a master clear/master reset/hard reset will erase all your data (photos,videos,contacts etc) completely and reset all the settings to Factory default. The information contained in this website is for general information purposes only.In no event will resetcellphone.com be liable for any loss or damage including without limitation, indirect or consequential loss or damage. For complete disclaimer notice please visit Disclaimer. The brand names are the registered trademark of respective manufacturers.

Sep 06, 2012 | Samsung SPH-M800 Cell Phone

1 Answer

Hard reset motorola i880


Steps to Reset Phone Settings

This restores all the factory defaults, including the ringer types and display settings. The Recent Calls, Scheduler, and all text messages will be erased. Contacts are not affected.


  1. Press Menu > Settings > Advanced > Reset Defaults > Reset Settings.
  2. Enter six digit security code (default 000000) and press OK. (A disclaimer is displayed).
  3. Read the prompt and press Yes to complete the reset.


Steps to Reset Phone

This resets phone settings and clears all phone data, including Contacts, History, Scheduler, and Messaging.


  1. Select Menu > Settings > Advanced > Reset Defaults > Reset All.
  2. Enter six digit security code (default 000000) and press OK. (A disclaimer is displayed).
  3. Read the prompt and press Yes to complete the reset.


Warning!: While reset/restore operation under process, you are advised not to remove your battery until the operation is completed and cellphone restarts otherwise phone damage may occur.*Disclaimer:Performing a master clear/master reset/hard reset will erase all your data (photos,videos,contacts etc) completely and reset all the settings to Factory default. The information contained in this website is for general information purposes only.In no event will resetcellphone.com be liable for any loss or damage including without limitation, indirect or consequential loss or damage. For complete disclaimer notice please visit Disclaimer. The brand names are the registered trademark of respective manufacturers.

Aug 29, 2012 | Motorola Cell Phones

1 Answer

How do i delete all contacts at 1 time on my lg rumor 2


This resets all the settings to factory default including the ringer type and display settings. All data from Contacts, Messaging, Pictures, My Contents, Tools,and Settings will be lost, and preference settings will be set to factory defaults.


  1. Press Menu/OK key > Settings > More... > Security.
  2. Enter lock code. The default lock code is the last four digits of your phone number.
  3. Select Reset Phone. (A disclaimer appears.)
  4. Read the disclaimer and press OK.
  5. If you are certain that you would like to restore phone, select Yes.

http://www.resetcellphone.com/solution/LG/lx265-rumor2

Jul 22, 2011 | LG RUMOR Cellular Phone

1 Answer

I was givin a phone in its locked and i can not get in contact with the person who gave me the phone in i need to get it set back to the defult code how can i do dat


http://www.resetcellphone.com/solution/Sanyo/SCP-2700-Juno
Steps to Reset Settings
Resetting the default settings restores all the factory defaults, including the ringer types and display settings.The Contacts, Call History, Calendar, and Messaging are not affected.

  1. Press Menu (the round key in center)> Settings > More... > Security.
  2. Select Delete/Reset > Reset All Settings and press OK (the round key in center).
  3. Read the disclaimer and press OK .
  4. If you are certain that you would like to restore all the factory settings, press Yes (left softkey).

Steps to Reset Phone
Resetting the phone resets all settings, including the ringer types and display settings.This option will delete all data on your phone.

  1. Press Menu (the round key in center) > Settings > More... > Security.
  2. Select Delete/Reset > Reset Phone and press OK (the round key in center).
  3. Read the disclaimer and press OK .
  4. If you are certain that you would like to reset your phone, press Yes (left softkey).

Warning!: While reset/restore operation under process, you are advised not to remove your battery until the operation is completed and cellphone restarts otherwise phone damage may occur. *Disclaimer:Performing a master clear/master reset/hard reset will erase all your data (photos,videos,contacts etc) completely and reset all the settings to Factory default. The information contained in this website is for general information purposes only.In no event will resetcellphone.com be liable for any loss or damage including without limitation, indirect or consequential loss or damage. For complete disclaimer notice please visit Disclaimer. The brand names are the registered trademark of respective manufacturers.

Jan 01, 2011 | Sanyo SCP-2700 Cell Phone

1 Answer

I have a 6200 series hp photosmart printer. It is stuck in the shutting down mode. How do i fix it?


Hi,
Please try the following solutions and keep your fingure crossed:

1. Conect the printer directly to the wall outlet

2. Power cycle:
Follow the steps below to power cycle your all-in-one:
1. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.
2. Wait 30 seconds.
3. Plug in the power cable to All-in-One and also to wall outlet. and check the functionality.

3. Semi full reset
Reset the All-in-One to the factory default settings by using these instructions:

1) Press Red Eye Removal & Print Photos button simultaneously

2)Enter Special Key Combo is displayed on the screen.
Press and release in sequence "Red Eye Removal", "Print Photos", "Red Eye Removal"
Display should say "Support" and display the FW rev XXXXX.

3) Press Right Arrow button untill "Reset Menu" is displayed. Press OK.

4) Press Right arrow untill "Semifull Reset" is displayed.

5) Press OK.

Jun 10, 2010 | HP OfficeJet 6210 All-In-One InkJet...

2 Answers

My son selected the out put to 1080p instead of 1080i and is giving me a message invalid format, and i can not reset it to the 1080i, i got a samsung BD-P1200


Hi there.

Take out any disc still in the player and, with the power on, press and hold down the Fast Forward button on the front of the unit for 10-15 seconds. This will reset your player to its default settings. A language menu selection should appear on the TV screen, which confirms the reset.

Keep in mind that the default output for the device might be analog, so make sure you have those connectors at hand.

Hope this helps,

-LL

Feb 24, 2010 | Samsung BD-P1200 Blu-Ray Disc Player

1 Answer

How do i reset the phone?


To reset reset your phone to the factory default settings, perform the following steps:

1. Press the Menu/OK key, then select Settings, then Security, and then enter your lock code. The Security menu is displayed. 2. Select Erase/Reset, then Default Settings. A disclaimer is displayed. 3. Read the disclaimer, and then press the Left Softkey to select OK. 4. If you are certain that you would like to restore all the factory settings, select Yes.

Have a great day!

Jul 09, 2009 | Sanyo Katana® II Cellular Phone

1 Answer

Out of Paper error on HP Photosmart C6280 All-in-One


Cause:
======

1. This issue might be caused by any of the following:

2. The paper trays are empty or overloaded.

3. The paper is curled.

4. The paper-width guide is pressed against the paper stack too tightly.



I would like to inform you that this issue can be resolved by following steps.



Power Reset:
==========
Disclaimer: A power reset sets the product to factory defaults.



1. Verify that the unit is switched on. Unplug the all-in-one from power and
disconnect the USB cable from the computer.

2. Wait 30 seconds.

3. Plug in the power only.
4. Repeat steps 2-4 two more times.
5. On the third time after plugging the unit into power, reconnect the USB
cable from the all-in-one to your computer.
6. Restart your computer and check the functionality.



Plug the All-in-One directly into a wall outlet:
===================================

Use these steps to make sure the product is properly connected to a suitable
power source.

1. Make sure the computer and the product have a three-prong power plug.
2. Remove the product power cord from any power strips or surge suppressors,
and then plug it directly into a grounded wall outlet.


This should resolve the issue. However, if the issue persists, I request you to
perform Semi Full Reset.



Semi Full Reset:
=============
A semi-full reset will do the following:
The user settings to the factory defaults, Language and country settings on some
models.

Reset the All-in-One to the factory default settings by using these
instructions:

1. Press Red Eye Removal & Print Photos button simultaneously
2. Enter Special Key Combo is displayed on the screen.
A. Press and release in sequence "Red Eye Removal", "Print Photos", "Red Eye
Removal"
B. Display should say "Support" and display the FW rev XXXXX.
3. Press Right Arrow button until "Reset Menu" is displayed. Press OK.
4. Press Right arrow until "Semi full Reset" is displayed.
5. Press OK.

After the Semi-full reset I still had to fiddle with the paper tray but it did work.

Oct 29, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Furuno GP1650DF GPS Receiver Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Furuno GPS Experts

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Steve
Steve

Level 3 Expert

693 Answers

Are you a Furuno GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...