Question about Onkyo TX-DS575 Receiver

1 Answer

Hi. my original remote for my onkyo tx ds575 all of a sudden is not working anymore. the red light on the remore still lights up when i press a button but the receiver is not picking it up. hopefully you can help. thanks.... roland

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,992 Answers

The red light on the remote just means the battery is good and the remote is responding when you press a button. It doesn't mean the control is actually sending out a signal. Many retail stores have a tester that will tell you if the remote is transmitting. Another possibility is that the remote sensor in the receiver has gone bad, and that the remote is fine. A universal remote (One-4-All URC6131, for example) that can work home theater receivers can be used to test the receiver. It may not work all the functions, but if it turns the receiver on and off you'll know the remote is at fault and not the receiver. Then you'll be able to replace the remote or have the receiver serviced as needed.

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have lost the remote control of my Onkyo TX-DS575 AV reciever/DTS Amp and cannot find one in the market. I have used a universal remote which had a couple of Onkyo codes with it but it doesn't work. Is...


Amazon.com, MyRemoteControls.com, and Remotes.com all sell a replacement remote for the TX-DS575. I have also seen the Onkyo TS-DS575 receiver with remote listed on eBay for as low as $35. Keep looking; the remotes are out there.

Jan 22, 2014 | Onkyo TX-DS575 Receiver

1 Answer

How do you reset the controls on an remote control for my onkyo tx-ds575


See the manual you can download on this site on page 39
1. Open the battery cover and remove the batteries.
2. While pressing and holding down the ON button and the
STNBY button, insert the batteries in the correct direction.
After inserting the batteries, release the buttons. The SEND/
LEARN indicator flashes slowly.
3. Press the ENT button.
The SEND/LEARN indicator lights up for about ten seconds,
then turns off. All programmed codes are erased and the button
memories return to the factory presets

Jun 30, 2010 | Onkyo TX-DS575 Receiver

2 Answers

Remote doesn't operate reciever


Hello Fixya customer,

Thank you for your question.

Please determine if the "Audio" button is actually working.... after pressing the audio button, can you still control the DVD, if not then the remote has switched to the Onkyo. Although, this is not 100% conclusive, unless you have a 2nd remote to test the Onkyo with, it provides a sound basis to proceed.

Assuming the remote is transmitting and the IR receiver on the front of the Onkyo is not otherwise blocked, likely faults include the IR receiver, input to the Micro processor, and the Micro processor.

The most probable fault is the IR receiver.

Thank you for using Fixya, and if I can help you further, please let me know.

Apr 29, 2010 | Onkyo TX-DS575 Receiver

1 Answer

I need the remote code for my onkyo tx-ds575, my remote isn't working and i want to program another remote to control this unit.


Get yourself a remote from Logitech Harmony family. It magically knows all the possible codes. And the support is VERY helpfull.

Mar 22, 2009 | Onkyo TX-DS575 Receiver

3 Answers

Onkyo TX-DS575X, remote intermittend malfunction


You have to raplace IR sensor PIC-26043TE2 or similar and should help.

Oct 08, 2008 | Onkyo TX-DS575 Receiver

1 Answer

Will not power up but stand by light is powerd up


I have onkyo tx-ds575 and i need to conect it to my tv and have audio from a LCD flat panel.

Oct 05, 2008 | Onkyo TX-DS575 Receiver

1 Answer

Need fiber optic input jack for Onkyo TX-DS575


Had it ever worked, or are you setting it up for the first time?
Have you ASSIGNED the digital input in the menu?

Dec 18, 2007 | Onkyo TX-DS575 Receiver

2 Answers

Remote control


Have you pressed the Mode Audio button on the left above the circle? This tells the remote you want to control the reciever.

Aug 25, 2007 | Onkyo TX-DS575 Receiver

Not finding what you are looking for?
Onkyo TX-DS575 Receiver Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...