Question about JVC Audio Players & Recorders

Open Question

Where to find part: lva10505-01a1 for model: sp-pwm505

Posted by on

1 Suggested Answer

dunnbiker
  • 8546 Answers

SOURCE: I HAVE THE JVC DVD

Find the manual here:

http://www.retrevo.com/support/JVC-TH-M505J-Home-Theater-Systems-manual/id/318dj491/t/2/

Posted on Jan 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have only a speaker to a jvc sp-pwm505 surround sound system. But am looking to power it using something else. Is this possible?


Yes, all speakers operate on the same principle. Though depending on the resistance of the speaker, usually 4 or 8 ohms, it may place too large a load on the source driver. Try it and see.

Nov 25, 2014 | JVC Audio Players & Recorders

1 Answer

The subwoofer SP-PWM505 won't turn on.


Make sure its not set to Auto. Also check for a fuse in the back. Unplug the amp side and with the sub plugged in touch the RCA. You should hear noise from sub. Try this last. Some may say this is not good for the sub. Im in the business and never have seen it cause a problem

Jun 18, 2013 | JVC SP-PW100 Subwoofer

1 Answer

WHERE CAN I BUY A SP PWM505 CABLE THAT GOES FROM MY RECEIVER TO THE SUBWOOFER? ITS A HOME THEATER


  • Here is a list of cables for your unit from Crutchfield's.


  • If your looking for the s pin DIN cable from the sub you can get that anywhere. The 8 pin DIN is a standard cord the same across the board. Here are a couple to choose from.



  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Oct 11, 2011 | JVC TH-M505 System

1 Answer

I CANT FIND A SP PWM505 CABLE


  • Here is a list of cables for your unit from Crutchfield's.


  • If your looking for the s pin DIN cable from the sub you can get that anywhere. The 8 pin DIN is a standard cord the same across the board. Here are a couple to choose from.



  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 11, 2011 | JVC TH-M505 System

2 Answers

Can I replace a broken Samsung 42" plasma PN42B450B1D screen with a Samsung 42" plasma SP-S4243 screen? Are the screens interchangeable?


No, you cant. I have 2 tvs just like yours but the LN model is newer than the SP model tv. I have the same problem, my LN tv has a cracked screen and the other SP model is good

Sep 13, 2010 | Samsung SP-S4243 Television

2 Answers

Sony subwoofer model# sp-pwm505


I have a JVC sub woofer SP-pwm 505 can I use this with any system my receiver has RCA jacks it looks like this uses a S cable...is there a cable that would convert "S" cable from sub woofer to an RCA output jack in receiver allenfreedman@yahoo.com

May 15, 2008 | Audio Players & Recorders

5 Answers

SP-PWM505 subwoofer does not stay on


Well i had exactly the same problem, my sub turned off right away when i turned the whole thing on. Well i opened the subwoofer and was trying to find out something unusual, i took out, i believe, internal amp, well, whatever that thing is, under the lid. Which one is screwed with 6 copper screws, so you unscrew those screws, lift that lid and that whole board comes out. On that board i find something like burn around one of the parts.

http://www.flickr.com/photos/28004328@N04/3333561417/in/photostream/

you can see it in the pick, the part q2902, then i contacted JVC. At the beginning they said i need to take the whole thing to service center and so on. But later i made them to tell me what kind of part that is, so here :http://www.jvcservice.com/store/ProductDetail.asp?Part=KTC3199/GL/-T
bought soldering gun in home depot for $15, returned after i was done. And that is it, just have to replace it, but total cost only $12 ($5 part +$7 shipping)

May 15, 2008 | JVC TH-M505 System

1 Answer

SP-PWM505


MOst of the time it is the jack that the cable plugs into that has the problem. .
Also the jack is not broken but HAS broken the solder connection TO the jack.
If you know someone who can safely take it apart and solder, let them try.

Feb 07, 2008 | JVC TH-M505 System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4767 Answers

The Knight
The Knight

Level 3 Expert

71705 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...