Question about Amana Washing Machines

1 Answer

Replacing belt - Amana Washing Machines

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 68 Answers

This is easiest done if you lift up the front of the washer, and support it. Some washers will have a tension pulley to release the tension on the belt. Replace the belt, Adjust the tension on the belt so that when it is tight you can twist the belt 1/4 turn.



Please rate this solution

Posted on Aug 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a broken belt of motor of whirpool wash ultimate care 2


  • Replacing the Belt in a Whirlpool Ultimate Care II ' Home ... homeguides.sfgate.com > ... > Mortgage-Backed Securities Replacing the Belt in a Whirlpool Ultimate Care II by Rogue Parrish. Email; ... The Ultimate Care II washer, ... it may have a broken belt.
  • Whirlpool Washer: Ulitimate Care II - YouTube www.youtube.com/watch?v=bVmjmSzMXHE
    • BY CHERRY HILL
    • 3 MIN
    • 36K VIEWS
    2012-05-30 · Video embedded · Whirlpool Ultimate Care II: ... This is fully funcational washer. Direct Motor Drive works perfectly through each ... Whirlpool Washer: Ulitimate Care II
  • How to replace a broken dryer belt. Whirlpool Ultimate ... www.youtube.com/watch?v=PU8QZeDRl_0
    • BY BAILSOFSTEEL
    • 5 MIN
    • 3.5K VIEWS
    2015-04-04 · Video embedded · This video shows me replacing a belt in a Whirlpool Ultimate Care II ... a broken dryer belt. ... Whirlpool ultimate care II clothes washing

  • http://www.bing.com/videos/search?q=broken+belt+of+motor+of+whirpool+wash+ultimate+care+2&FORM=HDRSC3

    Jul 15, 2016 | Washing Machines

    1 Answer

    Belt replacement


    belt goes on the bottom of dryer. look up your model on internet on replacing belt . its pretty easy. if old belt is still on make a diagram of how belt goes on, also take a pic.

    Jan 30, 2014 | Amana DLW330RA Top Load Washer

    1 Answer

    Is it always necessary to purchase a new pump when replacing the belt on top load Maytag Washer? Model No. SAV205DAWW


    Not necessary, unless you are suspicious for a problem pump. Or if want to avoid another problem.
    Otherwise you must not do it.God bless you
    10_17_2012_4_06_54_am.gif

    Oct 16, 2012 | Maytag Washing Machines

    1 Answer

    GE washer belt 7 PJE 1303


    Please check with the site : wwwespares.com for spares
    click this link for tips on replacing belt: belt replacement

    Jun 25, 2012 | Beko Hutchinson Poly.v Dryer Belt 9phe...

    1 Answer

    Replacing a drive belt on a maytag washing machine. need instructions


    Below is a 2 part video that demonstrates the procedure for replacing the agitator belts. It's authentic (down to the occasional cursing lol )and although the lighting isn't great, you can see exactly how to change the belt(s). (inspect belts before buying new one to see if both are needed) . Best of luck with your repair and please post back with any questions.
    Greg

    Sep 08, 2011 | Washing Machines

    1 Answer

    How do a replace the belt on the drum of my indesit washer dryer


    REMOVE THE SOCKET FROM THE WALL OUTLET.
    To replace a belt that passes over the drum on a dryer you need to be able to pass the new belt over either the back or the front of the drum. This entails removing the front panel to clear the whole drum or loosening off the rear bearing support to pass the belt under it so that the belt can be passed over the drum. From there it is just a case of passing the belt over the motor pulley and replacing all the parts. Select which will be easier on your machine. After replacing everything but the top panel, make sure that the belt is correctly installed by turning the drum several revolutions by hand and ensuring that the belt is running true and still on the motor pulley. Replace the top cover and you are set to go.

    Feb 19, 2011 | Indesit Washing Machines

    1 Answer

    The belt on the drum has come off is it worn or is it the pulley needs replacing


    your belt is worned ou already sir,replace i sirif the csing of your machine is designed in two piece, you can replace it by your own, conentrate from the back remove all screws attached including from top rail,there are at least 9 pcs of screws there, aafterr removing those screws push the backcover backward and you will have the full access in replacing the belt. If it is not the design it is only a back cover that you have to remove from the back,remove all the screws then you have your full access to replace the belt

    Mar 19, 2010 | Indesit Washing Machines

    1 Answer

    Washer will no longer spin - was making loud noise then started stinking as though a belt was burning and now won't spin at all? Is there a belt I can replace?


    usually when the belt burns on a maytag it's a sign that a pump, motor or trans needs replacing. tilt machine back, remove belt from underneath & ck for restrictions in all 3 pulleys. If there's a burnt belt...replacing just the belt is a waste of money

    Nov 10, 2009 | Maytag HAV2360A Top Load Washer

    1 Answer

    Belts need replacing how do i do it?


    Pull washer out a couple of feet and tilt it back, lifting the front. Rest against the wall. The belts are on the bottom. Remove the drain pump belt, and you'll get to the drive belt. The motor is installed on a plate and held by a spring. To install the belts easier, push motor towards the transmission pulley when installing new belts. Part numbers: 211124 for the pump belt, and 211125 for the drive belt. Set of both belts: 12112425.
    The set of both belts includes an instruction sheet also.
    Coupon "New10" takes 10% off.
    Good luck

    Oct 31, 2009 | Maytag Dependable Care LAT9416

    1 Answer

    How do you put the belt on?


    Hi,
    I don't know what make or model you have, but generally, the basic top-loading design washing machine has the motor located on the bottom of the unit, mounted vertically to drive the transmission under the drum. On the back of the washer, would be an access panel to expose the motor and your belt. Replacing the belt isn't as tedious as replacing a belt on a front loading dryer. Get the make and model info from your unit to your appliance part store to get the correct belt. I hope this helps... Good luck!

    Aug 27, 2009 | Washing Machines

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    183 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Amana Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you an Amana Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...