Question about Dedicated Micros Digital Sprite 2 RS Video Recorder

Open Question

We have a Dedicated micros DS2A 6 channel DVTU unit.\r\nIt works in a standalone manner until we try an use Network viewer software to view the cameras. After 10 to 20 minutes the unit resets, somtimes it comes back on line but somestimes it requires a manual reset.

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: forgot admin password Dedicated Micros Digital Sprite 2 RS Video

You can't. You have to send it back to dedicated micros, unless of course you can use hyperterminal.

Posted on Feb 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It says I need code to get some stationd


This could be caused by your channel receiver picking up a new channel, like a scrambled sky channel.
Do you have a standalone receiver like, MYSky or Free-view, Dish TV or similar.
These usually scan for new channels occasionally and find channels that need codes or are scrambled.
Maybe you have a content lock on the TV to prevent the viewer from accessing some channels.

Feb 11, 2014 | Toshiba 65HM167 65" Projection Television

2 Answers

Hi! Bernie here, I have an Linksys E1000 wireless-n router. How could I adjust the interference on my phone (Vtech 2.4ghz) is there an adjustment to make on the router itself or do I have to buy another...


E1000 router is not a dual band router.
It works only on 2.4 GHZ wireless signal.
You can try changine the wireless channel on the router.
If you have installed the Cisco conect software on your computer, then open the Cisco connect software. Go to router settings. Click on advanced settings. It will open the setup page of the router. Go to wireless tab.
Set the configuration view to Manual.
change the channel to 11. See if that works.
If not then change the channel to 1 and check it.

Click Here for more information about the routers and network

Oct 15, 2010 | Cisco Linksys E1000 WirelessN Broadband...

2 Answers

How to check the IP on Digital Sprite 2?


I have no idea what Digital Sprite 2 is , but one universal way to check an IP of a device is to put it after DHCP server and check that server's IP allocation table.

Most home routers have those DHCP servers built-in and functional, so maybe the real question here is "how to check the IP lease allocation table of my wireless router" :-)

May 25, 2010 | Dedicated Micros Digital Sprite 2 RS Video...

1 Answer

Can't view my cameras


The DVR will be programmed with an IP Address via the DVR main menu function (network settings) and a valid password. The network viewing software (web viewer) you will need to ensure that the IP address is entered correctly for your DVR along with your valid user password.

Trust the above info is of assistance if you require a manual in order to check your settings try this link http://tv.manualsonline.com/manuals/mfg/samsung/samsung_dvr_product_list.html

May 23, 2010 | Samsung 4 Channel Dvr

4 Answers

Forgot admin password Dedicated Micros Digital Sprite 2 RS Video


You can't. You have to send it back to dedicated micros, unless of course you can use hyperterminal.

Feb 07, 2010 | Dedicated Micros Digital Sprite 2 RS Video...

1 Answer

The volume of sony wega kv-sw29m61 set always to maximum when it turned on


On your remote control (with tv off)
1. press Display, channel 5, Volume Up and then Power
this brings up the service mode (you will see some green text on your screen)
2. Press channel 2 to scroll through options until you see "Micro" in the upper left of your screen
(channel 2 cycles up through the options, channel 5 cycles down)
3. Press channel 1 to scroll through suboptions until you see "DIOF" appear under "Micro"
(channel 1 cycles up through the suboptions, channel 4 cycles down)
4. Press channel six until the default value (12:60) changes to 12:40
(channel 3 increases the value, channel 6 decreases the value)
5. Once the value has been changed to 12:40, press Muting and you should see red text in the upper right hand corner that says "Write"
6. Simply turn the power off and back on for the change to take effect. Your volume problems should now be fixed.

Jan 16, 2010 | Televison & Video

1 Answer

Have Digital Sprite 2 with static ip. No network connection.


swap cords, is the lights on in the net jack on the unit, if no then maybe faulty

Jun 02, 2009 | Dedicated Micros Digital Sprite 2 RS Video...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dedicated Micros Televison & Video Experts

CoppellTVRepair.com

Level 3 Expert

749 Answers

electracon

Level 2 Expert

109 Answers

 Russ Hill
Russ Hill

Level 3 Expert

3187 Answers

Are you a Dedicated Micros Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...