Question about D-Link 802.11g Wireless Router WBR-1310 (WBR1310)

1 Answer

How do you confirm or change you wep password

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

At first you need to have the password in order to change it. If you don't have it, you can reset the router to its factory default configuration. To do that, look on the back of your router. There should be a small hole that only a sharpened pencil or pen tip will fit in. There is a button inside that hole. You want to make sure you press the reset button down for about 15 seconds and make sure the lights flash on it when you do that. Your router will reset to the factory defaults.

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I find my wep key number


You can find your Belkin WEP key on its bottom or back side, Normally all other routers are coming without password, but belkin asks its physical address has its WEP password,
you can change it's password and SSID by login in through internet explorer, both the username and password of router can find on it's backside, then follow some easy steps to change SSID (wireless name) and wireless password (WEP) min 8 charectors,
please don't try to change your username and password provided by your Network provider if are not a professional, (connection may lost)
Thank you rate if you succeeded

Sep 03, 2011 | Belkin Basic Wireless Router

Tip

Enabling Wireless security on Linksys routers.....


Encrypting the network blocks any unauthorized computer from accessing the network and using its broadband connection. To enable WEP on the router,

1. Open your default browser and enter the following IP address into the address bar: <http://192.168.1.1>
2. When prompted for a username and password type “admin” on password, unless you have previously changed the password of the router, and hit OK. This will bring you to the Setup page of the router.
3. Depending on the firmware of the router. Click on the WEP Key Settings button. Or you can click the Wireless tab and select Wireless Security. Or you can click the Security Tab and select Wireless.
4. From the WEP/Security Settings window, you may enable 64 or 128 bit WEP then enter your Password on the Passphrase field and click on Generate. Make sure to copy the characters on Key 1-4 on a piece of paper before you hit APPLY. You will be needing this once you enable WEP on the wireless PC’s. Also take note that if you enable 64 or 128 bit on the router, this should be the same WEP level that you will enable on the wireless cards.

To put in the network key in your wireless adapter follow the steps below:

WEP Encryption XP's Wireless Zero Configuration ( Advisable for XP PC's )

1. Go to start>Control Panel>Network Connections>Right click on the Wireless connection then click on Properties>Click on the Wireless Networks Tab
2. From the Wireless Network Connection properties window, under the Preferred network click on Add then type your SSID on the SSID field and check the box for Data Encryption then then unchecked “The Key is provided for me Automatically”
3. Type your WEP Keys on both the Network Key and Confirm Network Key field. (This set of characters should be identical to the WEP Keys Settings on the router. For 64-bit WEP you should have 10 characters, for 128-bit you should type in 26 characters.) Then hit OK and then OK again.
4. After hitting OK a pop-up should appear on the lower right hand side saying “Connected”. Try pointing your mouse arrow on the lower double monitor icon.
5. Restart your PC

WEP Encryption using the Linksys WLAN Utility ( 98/Me/2000 )

Make sure that the WLAN utility of the Linksys adapter is already is installed. If not, you may follow follow the procedures below for "Installing the Linksys WLAN Utility"

1. Click on Start then Programs, then click on anything that says something about the Linksys Wireless Adapter. On the menu, select either WLAN Utility or Wireless Configuration Utility
2. On the lower right-hand side of your screen, double click on the Linksys Icon. This will bring up the WLAN Configuration Utility.
3. Click on the Profiles Tab. Make sure that the SSID that is set to default is your routers SSID. Highlight Default then hit Edit.
4. Select Profile Wizard. Continue to click the Next button, until you get to the Security Settings Window.

OR select Expert Mode then Next. Then click on Security Settings
5. Set the same WEP level that you have enabled on the router. ( ex. 64 or 128 )
6. Type your WEP Keys. This set of characters should be identical to the WEP Keys Settings on the router. For 64-bit WEP you should have 10 characters, for 128-bit you should type in 26 characters.
7. Hit OK then Next. On Confirm New Settings click Yes. And then click “Activate New Settings Now”

If this is a Helpful tip Thumbs Up is appreciated. Thank you

on Jan 03, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

How to set a password?


  • Access the router's default configuration address through your Web browser by entering this address: http://192.168.1.1 (see Resources). Do not enter a user name. Enter "admin" for the password. That process works for all new Linksys routers. If you have changed the user name or password in the past, use the user name and password that you created.

  • 2

    When the configuration screen opens, click on the "Wireless" tab and select "Wireless Security" to view the router's current security password. The "Security Mode" field will say "Disabled" if you do not have a password to secure your network.

  • 3

    Select the appropriate encryption type from the "Security Mode" drop-down menu. Linksys routers offer WEP and WPA encryption. WPA encryption allows you to use a single password to access the network. WEP encryption creates 10- or 26-character keys that act as your password. Some of your wireless devices may only utilize a certain type of encryption. Determine which protocol is best for your network.

  • 4

    Enter a password that will be required to access the network. For WPA encryption, you can write your own password. For WEP encryption, click the "Generate" button to create passwords that can be used to access the network. Write down your passwords and keep them in a secure location.

  • 5

    Click "Save Settings" to confirm your changes. Your network will now be secured and will require a password for access.

  • 6

    Click the "Administration" tab to create a password to access the router configuration page itself. Be sure to change the password from the default "admin." Reenter the password for confirmation in the next field. Click "Save Settings" to confirm your new password.

  • Feb 16, 2011 | Linksys Wireless-G WRT54G Router

    1 Answer

    I need help getting a connection with my router. I currently have a direct connection to my Speedstream 5360 modem


    You need to connect your router to modem with the existing ehternet cable from wan post in the back of the router to modem port. After powering up the router, use an ethernet cable to connect your computer to one of the ports on it marked 1 through

    Next open a web browser window on the connected computer and type http://192.168.1.1 into the address bar and press enter. This will take you to the Netgear Smart Wizard welcome page, click OK to begin the configuration. The router will attempt to detect the type of connection you have and the next message you receive should be Dynamic IP (DHCP) Detected, click Next once you see this.

    Next you will enable the wireless capability of your router. In the dropdown box for the region where you are located select United States from the list. On this screen you should also change the Wireless Network Name (SSID) from its default value to something unique so that your Base Station will not be confused with another. Click Next. You should now see a message confirming that your connection is working and wireless is enabled. However, your are not secured yet. Read the notes and click Done.

    Then direct your browser to http://www.routerlogin.net to continue the configuration. A window will pop up prompting you for your login and password, enter admin for the username and password for the password, then click OK.

    Once you have logged in you will see the main configuration page (shown above). Now click on the Wireless Settings at the left of the page. In order to password protect your wireless network select the WEP (Wired Equivalent Privacy) option under the Security Options and then under the Security Encryption (WEP) section that appears, select 128 bit next to Encryption Strength. Choose a password between 6 and 8 characters and type it into the Passphrase box under the Security Encryption (WEP) Key heading. Then click Generate. Finally click Apply. You may also select WPA encryption, however not all network cards support this, so check your documentation first.Once you have finished, click the Apply button.


    Finally click on the Set Password link on the left of the page under the Maintenance heading. Change the default password for accessing your wireless router setup pages by first typing the old one, password, into the appropriate field and then entering a new one into the New Password field and confirming it. This should be a different password than the one you setup for WEP encryption, but should also be atleast 6 to 8 characters in length. Click the Apply button.Your Netgear Wireless Router is now secure.

    Aug 22, 2010 | NetGear WGR614 Wireless Router

    1 Answer

    I dont know how to change the SSID Name and WEP Key.


    You have to change it in the printer settings, not in the router! Otherwise you'll lose connectivity in all the other computers that use this router.
    The SSID is the name you gave to your wireless network, and the WEP key is the password you set for your wireless connection.

    Oct 28, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

    1 Answer

    Need to change password


    Log on to youre router.(@IE 192.168.1.1 IF YOU NEVER SET THIS UP BEFORE THE PASSWORD IS ADMIN IN LOWERCASE,LEAVE USERNAME BLANK)Go to the wireless setup under wireless security choose WEP there input a pass phrase and click on generate,make a note of it,THE FIRST NUMBER GENERATED AT THE TOP IS YOUR WEP KEY EVERY COMPUTER IN YOUR HOME USING THE WIRELESS INTERNET WILL NEED THIS KEY,, SAVE THE CHANGES.Now you will need to change the administrator password as well.Under administration input your new password (TWICE TO CONFIRM),Save and exit.
    Good Luck

    Oct 11, 2009 | Electronics - Others

    2 Answers

    Resetting WEP Password on Netgear WGT624


    If you hold the reset pin in for more than ten seconds(I always count to 15) it will do a Factory reset...this will set all back to factory specs

    Then you can set a new wep as well as an admin password

    Jan 27, 2009 | NetGear WGT624 Wireless Router

    1 Answer

    How to create a security enable router?


    Firstly, confirm that your ISP connection for email and internet is working correctly. Then connect the router to the ISP using the ADSL plug, and to your computer using the ethernet connection. It is best to set up your router using a wired connection to your computer. Once set up, you can connect your computer using WiFi. Have your ISP username and password handy.

    There are two steps to secure your router:

    1. Change your ADMIN password. Using a web browser like Intenet Explorer, type in the address, http://10.1.1.1. This should take you to a sign-on screen. Username is "admin", and password is set at the factory as "admin". You should now be logged in to your router. Go to the TOOLS tab, and change your admin password. NOTE THIS DOWN FOR FUTURE REFERENCE.

    2. Secure the wireless part of the network: Go to the HOME tab, and select either WEP security (good) or WPA security (better, but some devices like printers don't like this).

    For WEP you will need to enter a 10-digit WEP key. Numerals will do, or you can use hexadecimal (base 16) notation if you know this. Numerals will do and are no less secure. NOTE THIS DOWN in a secure place. Click the "APPLY" button.

    For the WPA alternative, you should select the "Pre-shared Key" radio button, and code in your WPA password in the "PSK String" field. This can be a word and or numerals. I don't think spaces or other characters are allowed. NOTE THIS DOWN in a secure place. Click the "APPLY" button.

    That's IT!! You've changed the admin password and secured the wireless part of the network.

    You will then need to code the WEP or WPA password into the devices like printers and computers that you want to connect to the WiFi. For Vista computers, right click on the network icon in the tray (two little computers overlapping) and select "Connect to a network". Enter the WEP or WPA password when you see SSID "default" or your SSID if you've changed it. Most printers have a connection wizard.

    There is a further enhancement if you are really paranoid: change the SSID and turn off the SSID broadcast. Go to the manual at:

    ftp://files.dlink.com.au/products/DSL-G604T-GenII/Manuals/DSL-G604T_GenII_Manual_v1.11.pdf

    if you want further details. Good luck with your secure network.

    Jan 19, 2009 | D-Link AirPlus G DSL-G604T (790069265662)...

    4 Answers

    Need to Change WEP Password or confirm present password


    The devices ip address is "192.168.0.1". type that into a web browser and a login screen will show up. enter your account password (not wep), or if u never did this before just leave it blank.
    Then you can go to wireless configuration and change the code. I suggest using WPA2 as you can use a password instead of a really long code.

    Dec 28, 2007 | D-Link 802.11g Wireless Router WBR-1310...

    Not finding what you are looking for?
    D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top D-Link Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2260 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18392 Answers

    Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...