Question about Philips Magnavox Learning Universal Remote

6 Answers

Living Solutions Remote - Manual

Where can I get a manual for the Living solutions universal remote (oversize)?  I need to know how to program it.
Thanks,
Henry

Posted by on

  • 9 more comments 
  • Anonymous Aug 04, 2008

    Need manual

  • Anonymous Aug 05, 2008

    i will not work



  • spikemcspieg Aug 09, 2008

    I dont know where to find the manual online but I have the manual and I could scan it for anyone who needs it just email me Spikemcspiegel@yahoo.com

  • dustin_lee_1 Dec 20, 2008

    sony tv big remote model #atc-1311

  • rmonte321 Dec 30, 2008

    samsung lcd 40 inch

  • shanequa Jan 06, 2009

    I NEED THE MANUAL E-MAILED TO ME FOR THE LIVING SOLUTIONS BIG REMOTE--I LOVE MINE,BUT I CANNOT FIND MY MANUAL.

  • Anonymous Jan 14, 2009

    Need to set up remote, can't find manual

  • Anonymous Jan 29, 2009

    I have an ORION tv and the footlong, silver with the oversize buttons living solutions remote.I need the code and how to program the remote, can you help?

  • sbennett19 May 03, 2009

    manual for living solutions remote ATC-1311

  • Anonymous May 19, 2009




    i lost the manual for my remote.


  • drcdj55 Sep 11, 2009

    I have a living solutions TM remote (oversize)

    that I need instructions on how to program

×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press and hold Tv VCR or DVD wait until the red light turns on then press power. Now press channel up or down until the the device turns on if you press it again while the device is on you'll have to do it again. After that hit OK then test it by pressing the volume button

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Go to this site- http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

Posted on Mar 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I dont know where to find the manual online but I have the manual and I could scan it for anyone who needs it just email me Spikemcspiegel@yahoo.com

Posted on Aug 09, 2008

  • spikemcspieg Aug 09, 2008

    I dont know where to find the manual online but I have the manual and I
    could scan it for anyone who needs it just email me
    Spikemcspiegel@yahoo.com

    OR

    If anyone needs the numbers to put in for any device for this remote just email me and ill email them back wicked fast I promise.... ive lost the stupid manual for this thing so many times believe me I kno how much of a pain it is


  • aaronreese Apr 21, 2013

    I need a code for dvd-vcr combo brand name go-video

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Can you give me the code fro living solution remote\\

Posted on Aug 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Philips Expert
  • 158 Answers

Google it

Posted on Sep 03, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to program my living solutions remote control to my JVC tv


download the instruction manual and code from www. fitness.manualsonline.com or www. retrevo.com or www. remotecodelist.com

God bless you

Jun 19, 2012 | Philips Magnavox Learning Universal Remote

1 Answer

I have a living solutions big universal remote control and i need to know how to program it to work on a sony tv


It is suppose to be a self learning remote control. Please see: http://www.ehow.com/how_4886691_program-living-solutions-universal-remote.html

on the specific detail on "How To" it will give you instructions.

Jan 22, 2011 | Remote Controls

2 Answers

I can't find the code for our tv brand it is a


    Try This Out


    Programming a Living Solutions Universal Remote
  1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player2.gif, VCR or stereo.
  2. Step 2 Pointthe remote at the device you are programming and press thecorresponding device button on the remote. These buttons are labeled"TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
  3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
  4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
  5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
  6. Step 6 Pressthe device button for the component you just programmed, and hit thepower button while pointing the remote at the component. If programmedcorrectly, the device should turn on, and you should be able to controlit with your Living Solutions Universal Remote.

Sep 21, 2009 | Big Button TV Universal Remote

2 Answers

Programming a remote


    Programming a Living Solutions Universal Remote
  1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.
  2. Step 2 Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
  3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
  4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
  5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
  6. Step 6 Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.

Sep 01, 2009 | Remote Controls

2 Answers

I allready did. need number codes for my hitachi useing living so


Try the following codes:
From the Living Solutions 'Colossal' remote/Brookstone Jumbo Universal Remote (identical codes):


Hitachi TV...041, 042, 058, 059, 068, 073, 075, 078, 101, 117, 126, 127, 131, 134, 140, 145


I would think that the 'Colossal' would have the same codes as the 'Giant' version since they are from the same company. If they don't work for some reason, try the Innovage Jumbo Universal Remote codes in their manual (see below).


References (PDF Manuals):
Living Solutions 'Colossal' remote
http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=livingsolutions


Brookstone Jumbo Universal Remote
http://www.brookstone.com/jumbo-universal-remote.html


Innovage Jumbo Universal Remote
http://www.remotecodelist.com/remotes/#comp_14


Good luck!
P.S. I'm new to this site, but why was it asking me to recommend a remote??? I just inserted the only remote I could from the drop-down list that was relevant to this question.

Aug 11, 2009 | Remote Controls

5 Answers

Living solutions giant remote control 3-in-1, A17G0510 (Item606426)


I had trouble programing the living solutions giant remote - c17g0801.
But after many times serching I ran across a genius' resolution (maybe it was 2 genius') -
Jumbo Remote:
Make sure you have device turned on.

Hold the device button you want to program for 3 seconds & release.

Push & release the power button & the red light will remain lit.

Push the CHANNEL UP button over & over slowly until the device turns off.

When device turns off press OK button.

Oct 27, 2008 | Philips Magnavox Learning Universal Remote

12 Answers

Code list for universal remote control-name brand is living solutions


This is what the manual says: Prgoramming the remote using PowerScan: 1. Manually turn OFF the device you wish to program (TV, VCR, DVD) 2. Press and hold the apprpriate device key (TV, VCR, DVD) until the red LED illuminates. This indicates that the Remote is in Programming mode. 3. Press and release the power key. The LED flashes once and stays ON, indicating that the remote is in PowerScan mode. 4. Press either the CH+ or CH- key Button repeatedly until the device switches ON. The CH+ Button searches upward in the code list, while the CH- key searches downward. (So since I have a Toshiba tv, I elected to search upward to get to 'T' faster. 5. When the device turns on, press and release the OK Button to store the new code and exit. To exit without setting the code, press the GO BACK Button. NOTE: If you press CH+ or CH- again after the device turns on, the device will not be programmed; you will need to repeat Steps 1-5 again. 6. Press and other operable key (VOL+/VOL-). If the device responds, no further programming is required. If not, repeat Steps 1-5.

Jun 08, 2008 | Big Button TV Universal Remote

Not finding what you are looking for?
Philips Magnavox Learning Universal Remote Logo

33,645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Remote Controls Experts

Ross Keen

Level 3 Expert

1130 Answers

gbob59

Level 3 Expert

2963 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Philips Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...