Question about Hensel Integra Pro 500 with S Monolight 90230V 8815E

1 Answer

Dear Sirs My Hensel pro expert 500 is working very well . In a moment it stops and appear " E1" in the window. I wait for some minutes and it work well again. Here,where I live, I have any expert. Can you help me ? Thank you very much

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

E1 is Overheating

I quote from manual:

All EXPERT / INTEGRA PRO units are equipped with a fan to avoid overheating with fast flash sequences, which could cause damage to the flashtube and the compact flash unit.
Nevertheless, if overheating occurs, the error is displayed on the LED 14. After a break for cooling down, the appliance is ready again for operation.

The unit must be repaired replacing the fan. The replacement parts for this unit are only sold by Hensel. The unit can be shipped for repairing, Hensel does not have an onsite repair network. Contact Hensel by using the number on website, to get the unit repaired, or to order parts and have them replaced by any general electronic technician.

Here HENSEL US website.

Here full documentation.


Manual 2


Posted on Mar 20, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Remove hard drive Acer aspire e1-472 laptop

In that case it is probably under the keyboard.
6 minutes into the video you can see the hdd

how to replace hard drive laptop acer Aspire E1 472 replace RAM

Mar 13, 2015 | Acer Aspire E1-472G-6648 Misty Silver 14"...

1 Answer

How do I stop the message of 'Missing or damaged cartridge

Delete and reinstall a printer driver and then go into the protery of the new driver and search for update go to they will give you the latest driver

Jun 03, 2017 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

Dear Sirs, The expert community; I had a hard disk. it had personal documents that need top security for I was sharing that HDD to many friends who might ask. For that only reason, I used the 'folder...

You MAY be able to recover your data, using data recovery software, there are a few very good FREE programs.
Try Recuva by Piriform.
It may be able to run if you can see the drive.
If this does not work, you may need to take the drive to a data recovery expert. This costs alot of money.
Any data written to the drive AFTER your files went missing may have overwritten some of your data.
Good luck

Aug 21, 2010 | Western Digital My Book Essential Edition...

1 Answer

Phone freezes when booting up when at windows logo stage...wat to do? phone has no antivirus, I have cleared storage for two times,taken out battery and tried to reboot but didnt work.

hard reset the phone, try;
If you cannot run program to hard reset form "Expert" folder. Turn off your phone, then press both *SOFT KEYS* and *POWER ON* device. After moment release both soft keys. On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.

Oct 21, 2009 | HTC S710 Smartphone

1 Answer

Problem with hensel integra 500 srudio photo flash

To start with, if you don't know exactly what your doing, there is a 50% chance of being killed working on a strobe flash. If you need a flash that regulates the power, buy one that does to start with as you have more money in modifying one than a new one costs.

Jun 10, 2009 | Hensel U Flash Tube for the Integra 250...

1 Answer

Dryer stops soon afetr cycle starts, E1 appears

ensure lint trap is clean and venting is not restricted or blocked.

E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

Normal thermistor resistance values:
60 degrees F. - 15.3K ohms.
70 degrees F. - 11.9K ohms.
80 degrees F. - 9.2K ohms.

Feb 10, 2009 | Whirlpool GEW9200L Electric Dryer

1 Answer


The optimal thing to do is remove the software program and re install it. Just as a word of warning if you don't know what services should be starting up with windows you should not disable any. Its fine to disable programs from the start up options, but as a rule of thumb stay away from the services.

Chances are this is a software program problem not computer.

If it still does not work, please post your question more thoroughly. Good Luck.

Jan 15, 2009 | E-Machines Computers & Internet

2 Answers

Haier wall-unit AC wont work

Try unplugging the machine, waiting a couple minutes, then holding down the power button as you plug it back in. Hopefully you will hear a "beep". Then unplug it again, wait a couple minutes, and plug it back in. This procedure works for clearing the "E1" code from some of the Sharp models, so maybe you will get lucky and the same manufacturer made the control board in your machine! Couldn't hurt to try it out. ;)

Jul 31, 2007 | Haier HWC08XC1 Wall/Window Air Conditioner

Not finding what you are looking for?
Hensel Integra Pro 500 with S Monolight 90230V 8815E Logo

Related Topics:

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hensel Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

81423 Answers

Brad Brown

Level 3 Expert

17448 Answers

Are you a Hensel Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides