Question about Indesit 24 in. DE73 Evolution Free-standing Dishwasher

1 Answer

Hello What does the error code A13 represent. The soap dispenser seems Ok. Could it be related to something else. The machine starts up Ok, but about 6 seconds into a cycle A13 flashes up and the machine stops. Help me...I'M GOING OUT OF MY MIND

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Indesit Master
  • 3,247 Answers

As you correctly pointed out A13 error is linked to the failure of the detergent dispenser lid operation.

If the lid is not opening at the correct time in the wash cycle, then the detergent will not be getting dispensed.

Either the controller circuit that operates the lid is faulty or the lid solenoid is faulty.

You can check the parts at this site.

Posted on Mar 20, 2011

Testimonial: " Thankyou for your prompt feedback, I will try the solenoid first, as the mechanism does not seem to be activating. Much appreciated. Thanks."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Duet Washer dispenser arm always starts cycle in fabric softener tray and bypasses soap tray.


Are you getting an error code possible F28 its possible its something in the linkage take the top off and start any wash cycle the dispense motor should move the diverter to the wash cubicle look or listen for any popping noise as if linkage is binding if nothing found I would suspect the motor it has contacts inside that feed back to the control indicating its position if the internal gears are slipping then the motor will rotate till contacts made regardless of diverter position

Apr 03, 2015 | Whirlpool Washing Machines

1 Answer

No water is getting into the washing machine. Error code display and soap is still in dispenser.


machines have a hot water and a cold water intake

if the water cold isnt getting to the blue intake it wont work
as you have an error code
post the error code it displays
you posted insufficient info to come to a good recon

Sep 24, 2014 | LG WM0642HW 4.0 cu. ft. Front Load Washer

2 Answers

Could you please tell me what error codes 21 and 6 relate to on a Winterhalter GS502 dishwasher. Many thanks. Barry CER


error 6 relates to a blocked drain pump. if the drain pump is working ok check if the tank level sensor is operating or if the air chamber in the wash tank is blocked.
error 21 relates to the drain pump being activated. normally related to error 6.
also check water inlet solenoid valve is working correctly. ie not blocked or passing.
all parts of the machine can be activated manually by entering service mode.
when machine is off press service button or switch on main pcb.
p00 appears. press and hold main wash button. --- appears. using the long and short wash buttons you can scroll through parts of the machine. displayed as a01 a02 a03 etc.drain pump is a12 solenoid valve is a13. these are activated by pressing the button. when activating the drain pump the display will count down. this number is the water level in the wash tank. if it's counting down the level sensor is ok.
hope this helps
jarv

Mar 29, 2010 | Dishwashers

1 Answer

Kenmore 90 plus won't fill on regular orpermanent press cycle.


OK, Duh..... I guess there is about a 2 to 3 min. delay for the liquid soap dispenser to fill up and disperse the soap into the washer tub. After that short cycle is complete the fill cycle engages and fills at normal speed.

Mar 24, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

2 Answers

Gestetner DSm615 giving error SC:552,How do i clear it


Are you sure of the code? I don't have the exact manual for that, machine but the number seems strange. "5xx" errors are usually related to the fuser, so could be a bad lamp, thermistor, or fuse. see note to reset (if there is not a problem) as follows:
There are 2 levels of service call conditions.
Level Definition Reset Procedure
"A"
To prevent the machine from being
damaged, the SC can only be reset by a
service representative.
The copier cannot be operated at all.
Enter SP 5-810 (SC code reset) and
select “1”. Then hold down the Original
type key and the OK or ! key at the
same time (this does not require the
main switch to be turned off and on).

Feb 02, 2009 | Gestetner DSm615 Digital Imaging System

1 Answer

Water from soap dispenser when spinning


Thanks this solution cured mine and my friends machine with this problem of water coming out of the soap dispencer.

Jan 12, 2009 | Washing Machines

2 Answers

Water overflowing from dispenser, no error codes


check the holes of the dispenser, could be clogged with soap and liquid detergent. check the hose where the dispenser flows to the drum, it could be clogged also. open the door, trace the dispenser hose that is attached to the drum or to the big rubber gasket at the front. check and see if there is dirt accumulation or soap clogging the hole.

tnx 4 using fixya,

drcool

Oct 14, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

MR WILLIAMS


Hi error code A13 means the soap dispensor on the inside of your dishwaher door is shorting out and will need to be replaced.
This is a fairly quick job and is relativly cheap to do

Dec 10, 2007 | Dishwashers

1 Answer

LG front loader problem


If you remove the top cover you will see the soap dispenser unit on the left. It has a large rubber hose connecting it to the drum. If you remove two screws at the front you can free the dispenser for maintenance. You can undo the clips on the various hoses and check that they are clean.

Some people report some dripping from the soap dispenser even when the hose is unblocked. This seems to be a design fault.

Nov 04, 2007 | LG WM2277H Front Load Washer

1 Answer

A13 error code


It seems to me that there isn't any problem with the normal washing cycle. The problem you have could be related to your dishwasher's detergant dispenser lid. I reckon that the relevant part isn't functioning normally. You can simply check out the claws placed on the detergant lid. If there is a spring inside, it might be damaged.

Apr 16, 2007 | Indesit 24 in. DE73 Evolution...

Not finding what you are looking for?
Indesit 24 in. DE73 Evolution Free-standing Dishwasher Logo

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

noel
noel

Level 3 Expert

4740 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...