Question about Apex Digital AD-1225 DVD Player

1 Answer

I have dish network and an apex 1225 dvd player. i do not have a remote for the dvd player. i do however have a dish network platinum remote control. i am in need of the code to link this remote control to my apex 1225 dvd player so i can play dvds and use the remote. so i am in need of the dish networks apex 1225 remote code.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 185 Answers

Try the steps below these processes are called a power scans, there is a different type for any equipment needed. This should take 5-6 minutes per item to program.

For DVD/VCR's:
1.) Press and hold the correct VCR/DVD button (about six seconds) until all mode button backlights come on, then release.
2.) Press 222 pound (#) then record three times.
3.) With the desired equipment on, press and hold the VCR/DVD button until all mode button backlights illuminate (about 3 seconds), then release.
4.) Press and release the Power button.
5.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
6.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

For TV's:
POWER SCAN
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

For any other equipment:
Power Scan AUX
1.) With the desired equipment on, press and hold the correct AUX button until all mode button backlights illuminate (about 3 seconds), then release.
2.) press 0 for a TV, press 1 for a VCR/DVD, press 2 for any other device, then press *.
Press and release the large red Power button.
3.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
With any of these methods verify the code works by trying several different functions for that equipment.

Daniel Busa
DISH Network
Customer Service

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i program my dvd player to my dishnetwork remote?? It is a apex digital 1110w dvd player


We would be happy to help you with that. Press and hold thedesired mode button until all mode button back lights come on, then release.Then enter the numbers 1757 for your Apex DVD player, and then press the # key.The mode button should blink 3 times. The remote should now work with the DVDplayer. Please remember to put the remote back into satellite mode.


Phillip Chang
DISH Network Customer Support Representative

Feb 18, 2011 | Apex Digital AD-1110W DVD Player

1 Answer

Trying to set up dish network remot to apex dvd player


dr172120,

I'm sorry you are having problems programming your DISH Network remote to your Apex DVD player. I looked through our remote codes but I don't show we have a code for an Apex DVD player. We do have remote codes for an Apex TV. You can run a power scan to see if you can find a code for the DVD player. I have provided the instructions to conduct the power scan below. If you have any other question, please post to this site.

Ray Calo
DISH Network - Executive Offices

Address To Other Equipment Using Power Scan
  • Remote: All Remotes (except Basic)
    1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release.
    2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device.
      Then Press STAR (*)
    3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
    4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Jan 14, 2011 | DISH Network IR Remote Control

2 Answers

Bought the VCR/DVD unit without a remote. I need a remote... Can I buy it separately from an additional unit?


I have found the customer support and ordering information page for Apex Digital.

http://www.apexdigitalinc.com/contact.asp


I hope you find this very useful:)
regards, Farmerbear

Sep 06, 2010 | Apex Digital AD-1225 DVD Player

1 Answer

I have lost my remote to my APEX AD 1225 DVD player so I bought a cheap RCA universal remote and the codes are not working for my player. The remote is RCR311BI. What code would work?


I am very happy to help you reprogram your RCA RCR311B for your Apex DVD player.

Please review my Fixya Tip posts for:

  1. Searching for the proper codes, or
  2. Entering the codes you have looked up on this remotes device code list.
I hope that helps.

Mar 17, 2010 | RCA Universal Remote Control

1 Answer

Need directv remote code for apex digital ad-1225 dvd player


Apex Digital 20672, 20717, 20755, 20794,
20795, 20796, 20797, 20830,
21004, 21020, 21056, 21061,
21100

You can get the manual on link below.

http://www.directv.com/learn/pdf/Remote_Controls/DIRECTVRC64forWeb.pdf

Jan 02, 2010 | Apex Digital AD-1225 DVD Player

1 Answer

Need manual for apex ad-1225 dvd player


Here is the link to your manual.

http://www.apexdigitalinc.com/manual/AD-1225%20Manual.pdf

It may take a few moments to load, it's 25 pages long.

Sep 07, 2009 | Apex Digital AD-1225 DVD Player

1 Answer

Replace DVD remote


Check this eBay auction for the remote:

http://cgi.ebay.com/Apex-Digital-AD-1225-DVD-Player_W0QQitemZ250397256142

Note, it comes with the DVD player free.

It's only $15.

Mar 30, 2009 | Apex Digital AD-1225 DVD Player

2 Answers

APEX CODES


I need the code for my ad-1500 apex dvd so I can program a new remote control

Mar 23, 2008 | Televison & Video

Not finding what you are looking for?
Apex Digital AD-1225 DVD Player Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...