Question about Behringer B215D Powered Speaker (550 Watts 1x15 in)

1 Answer

I have a B215D Behringer speaker and for 3 days or more the speaker was on, because somebody forgot to turn it of. when I tried to sing through it the bass frequencies sounded distorted the highs sounded alright. plug it through a 12' spk and that one to sounded distorted as well. whats the problem and how do I fix it. I appreciate your valuable help in trying to solve this issue Pedro Lourenco

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Behringer Master
  • 5,603 Answers

This should be close to your schematic;

Scroll down to "Get Msnusl" link and download. Leaving it on should NOT have caused a failure, however, if it was running and the input was not being driven there may have been feedback going on that did damage. Only thing to do is take it for repair.

Posted on Mar 20, 2011

  • frikadelik74 Mar 20, 2011

    thank you!! do you have any idea of the cost of the repair and were the go around Cranford, NJ.

  • Fred Yearian Mar 20, 2011

    I am clear across the country... I suspect the repair could be up to half the original cost of the unit and more important might be the delay. Waiting for parts from Behringer at present would take 6 months, but unless the speaker has been damaged (unlikely) the parts can probably be found at,,, or Allied or once the failure is isolated and defective parts isolated.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does Behringer B215D loudspeaker come on, then after a few seconds shuts off

You have a problemm in your power supply. It's not user serviceable, it needs to go to the repair shop.

Aug 06, 2014 | Behringer B215D Powered Speaker (550 Watts...

1 Answer

How do i connect a Behringer 1202 mixer to a Behringer B215D Powered speaker

Looks like both units accept 1/4" jack & I think the 1202 is unbalance out, so just use a standard screened mono (i.e. 2 pole "TS") jack to jack lead & you should be fine. Good Luck! :-)

Jul 28, 2014 | Behringer B215D Powered Speaker (550 Watts...

1 Answer

How dso I connect a seperate mixer to a Behringer B215D powered speaker

Use the two balanced outputs, intot he inputs on the back of the speaker, 1/4 inch jack should fit.
Alternativly you can do the same via xlr, for a balanced connection.

Jul 28, 2014 | Behringer Xenyx 1202 12-input 2-bus Mixer...

1 Answer

No bass

Check the wiring and also bad connections to the speaker first, then to the crossover connections next.

Mar 11, 2014 | Behringer B215D Powered Speaker (550 Watts...

1 Answer

Behringer b212 power keeps shutting off

What a surprise! This is not unusual. If you drive these hard they do tend to shut down. If you are not driving it hard and are not running into clipping there is obviously a fault and it will have to go back to Behringer.

Feb 23, 2014 | Behringer B215D Powered Speaker (550 Watts...

1 Answer

How do i get parts for behringer b215d my power ic is burn out

Regards, urgent help.

I have a powered speaker Class D, and the PWM isdead. change the IC 3525, is controled by a NE555 which is shutting down. works when connected to a higher voltage 150v, but turned it off, I think by overheating. I already changed mosfets, and ICs. I think that may be some component failure is triggering the protection, someone could help me. I'm a musician and I depend on this car for my livelihood. Thanks

Jan 06, 2012 | Behringer B215D Powered Speaker (550 Watts...

1 Answer

Speaker will play somewhat. the voices from the song will not play and it echoes a lot

You haven't told us how this used. Turning up the bass with the onboard EQ will worsen the problem. Also if a microphone is tied to this and the mic can "hear" this speaker that will cause an echo.

Jul 27, 2011 | Behringer B215D Powered Speaker (550 Watts...

Not finding what you are looking for?
Behringer B215D Powered Speaker (550 Watts 1x15 in) Logo

Related Topics:

1,193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Ben Armstrong

Level 2 Expert

357 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides