Brother Printer - HL 2140 How do I change the Toner.

when the toner light is on this means the toner cartridge is empty and ned to be replaced. After its replaced it will start working normally again.

this means that the toner cartridge is empty and wont print until you replace it.

Hello,
If you are getting "clean corona wire" on your PC and the toner light on the machine is solid, you need to change your toner cartridge.
This is a bug in the brother software.
Thanks,
Pat

Tip the toner cartridge from end to end to redistribute the toner. You will get more mileage out of it, if it is simply a low toner issue.

1>If the toner lite is blinking , it's mean the toner life near to end. In these case please replace the toner cartridge.
2>f the drum lite is blinking , it's mean the drum life near to end. In these case please replace the drum.
I hope it will help to solve your printer problem.

Dear sir, I know what is problem? your toner cartridge is demage please change it also you re-install your old toner then quickly take a decission
Thanks
xptareq2000
wiz
all the best

Hi,

This is a common problem to your brother printer model 2140. You need to turn off your printer and take out the toner. Look for the side and you will see a small hole on both sides. This is the sensor. You need to cover it with electrical tape.

Here is a detailed video on how to do it:

http://www.youtube.com/watch?v=hPCGZZIdXyM

Good luck and hope this helps you.

Try to unplug the power from the print, wait 1 minute then plug back in.

This may remove the error.