Question about Televison & Video

Open Question

Bush 42 inch plasma pdp42tv006 black screen but have sound

Posted by on

5 Suggested Answers

lukster
  • 217 Answers

SOURCE: black vertical line on p42w34p plasma

could be a loose ribbon cable on a buffer board, or one of the buffer could be going bad

Posted on Feb 17, 2007

  • 15 Answers

SOURCE: 42 inch LG Plasma TV - Lost picture

ysus pcb that supplies voltage to the panel is faulty

Posted on Dec 15, 2007

  • 3 Answers

SOURCE: 42 inch LG Plasma TV - Lost picture

Our LG 50" plasma tv screen went black after a popping noise but still had sound, after great diliberations decided to take the back off and have a peek!
We unplugged the tv and tested the fuses (there were three we could see) one had blown, the one on the left as you look at the back of the tv it also has one above it. We wrote the code/seriel number down and took the fuse to the electrical wholesalers Maplin and bought a pack of 10 fuses for £1.29 replaced the fuse in the tv and everything now fine!!!!!!
Hope this might be of use to anyone whose lost the picture after a loud popping/snacking noise but still has sound.

Posted on Jan 17, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: The screen on my 1

Reset the cable/sat box and tv by turning them off, unplugging them both from the wall outlet, and replugging them after 30 seconds. See if you get pictue back when they get the correct handshake. also, make sure that there are no loose cables going into the TV or into the cable/sat box. You can try using a different type of connecting cord from the cable/sat box to the tv to make sure it is not a bad connecting cord.

What type of cable is connecting your cable/sat box to the TV? Is it HDMI?

Are you using a video game system on the plasma?

Posted on Mar 07, 2008

Slinteriors
  • 8617 Answers

SOURCE: philips plasma problem

What is the model number of your set. I may be able to help you if you post the model number.

Posted on Mar 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

42 inch hitachi plasma


the more the tv remains on the picture gets out of focus mainly in the midle of screen. Sure sounds like tv needs some light engine repair or replacement.

Aug 11, 2009 | Hitachi 60V500 60" Rear Projection...

2 Answers

Hi, I turned on my 4 year old Sony 42" plasma today and the screen was black with speckles of colour flashing for a few seconds before fading out and the whole screen goes black. The sound was fine...


in sony 42 inch what is the exact model number of your TV?

also can you tell be how many times does the stand by light blink. that would help us to decode the problem in your TV

thank you

Aug 16, 2008 | Televison & Video

1 Answer

HITACHI 42" PLASMA SOUND BUT NO PICTURE COMPLETELY BLACK


it can be the loose connection on circuit board .can you resold the all pcb joints.
i will hlp you.or give it to service proffesional.
nuwan.

Jan 19, 2009 | Samsung HCL4715W 47" Rear Projection...

1 Answer

Color bar


Sounds like the TV is defective, if I were you I would take it back. There probably isn't much you can do on your own to fix it.

Jan 08, 2009 | Televison & Video

2 Answers

Bush pdp42tv006 4amp fuse blown . not the main fuse.checked for shorts .any help? thanks


pls check the main power supply<regulator> hang the loads going to secondary supply,

Apr 29, 2008 | Televison & Video

1 Answer

Goodmans pdp42tv006 plasma,comes on for 15 secs then shuts down power led blinks red constantly until power is switched off,when power restored does as above many thanks if you could shed some light on it,...


Bullis,
This is a common problem on these plasma TV's. The problem resides in the high voltage boards known as the X and Y Sustain boards.. You can purchase them here for a very reasonable price:
http://www.discount-merchant.com/Y-SUSTAIN-FOR-42-PLASMA-TV-PN-6871QYH036A-p/sku9510.htm

The above link is to a Y-SUS board. The X-Sus board is often the 2nd cause of failure and can be found here:
http://www.discount-merchant.com/X-SUSTAIN-6871QZH041B-6870QZE017D-6871QZH052D-p/sku9509.htm

To test which board is failing, you need to check voltage input to the YSUS board first... Input should be 120V from Power supply, output should be above 250V.. Do this test with XSUS disconnected. IF 250+V exists, then XSUS is damaged. If not, then the YSUS is the faulty part.

Mar 21, 2008 | Televison & Video

1 Answer

Philips plasma problem


What is the model number of your set. I may be able to help you if you post the model number.

Mar 08, 2008 | Televison & Video

1 Answer

Toshiba 42 inch plasma tv


sound no picture. well not entirely bad this idicate your signal getting through and you have partial power. however this could mean that the actuall panel is faulty. if so new set time. What is the model and make of set.

Jan 17, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...