Question about Novatel MiFi 2200 Mobile WiFi Hotspot Modem (Verizon Wireless)

1 Answer

During install on a Dell cpu w/ Vista: 1. Completed "click to open CD-ROM" drive laabeled Novatel Drivers. Drivers installed. 2. Removed MIFI 2200 cable and re-connected. 3. Message: Found New Software. Windows needs to install driver software for your Data Interface": Options available are "Locate and Install Software (recommended)", "Ask me again later", and "Don't show this message again for this device". If I select Locate & Install Software, I get "Device Driver Software was not successfully installed. Data Interface" I've tried a lot of ideas -- but I haven't made any progress. HELP!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 14 Answers

Go to https://www.del.com/support and download the driver you need directly from their site. This should resolve your issue(s).

Posted on Apr 03, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 390 Answers

SOURCE: Ipe.exe error at Novatel Photo Explosion Deluxe 2.0

Did you install it from an original disc or download it off the internet? If it is off an original disc, try making a copy of the dic if you have a burner. Now use the copy as the install disc. Unisntall it ands reinstall with backup copy disc. If you downloaded it off the net, the download is corrupted, and you need to uninstall it and download it again. Good luck.

Posted on Aug 30, 2007

Mabikire
  • 47 Answers

SOURCE: HARDWARE FAILURE IN THE MODEM (OR OTHER CONECTING DEVICE

1. Try reinstalling your hardware drivers again, its possible that your driver files were quarantined by the anti-virus software.

2. If just reinstalling your drivers does not work then try uninstalling your antivirus, reinstall your driver and see if they work

3. You can try using restore points, resore your system to an ealier time when your drivers used to work.

Posted on Mar 24, 2008

ginko
  • 19396 Answers

SOURCE: download software

Download page here : Software

If you have O2 you can also download from the phone, following instructions below:

Novatel U530 & U630 O2 Branded Datacards Installation instructions


See also:


Merlin U530 User Manual

Posted on Apr 28, 2009

  • 1 Answer

SOURCE: I purchased a mifi 2372

Samething with me. I have a mifi and it can connect to the playstation but cant sign in. It says it a DNS error. Which means one of your DNS numbers have blacked out and it can be fixed by getting knew dns numbers.

Posted on Feb 07, 2011

SOURCE: Everytime that I tether my

Have you tried plugging it to all ports on the laptop ?
Also, try plugging it to another computer/laptop to see if it is recognized correctly.

Posted on May 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a used dell dimension 2400, hard drive died i replaced it, but i dont have the original os disc that came with the system, can i use my copy of vista, or find another copy


If your Dell computer had Vista installed then you can use your copy of Vista CD and you can use the product installation code that is printed on the Windows label that is attached to your Dell.
When you insert the Windows CD into your Dell and boot up your computer then select the CD as the boot device (ie 4=IDE CD).

After Windows is installed and activated then you need to install the Dell computer's device drivers.
You can download the device drivers from Dell WEB site, the support download page. Make sure you select your model desktop or laptop, better still, type in the Service Tag number, it is printed on the label on the bottom of the laptop and on the back or sides of a desktop. (If the Service Tag label is missing then go into the BIOS setting and on one of the BIOS pages, the Service Tag number will be displayed). This will open the page where the specific drivers for your model computer are located. Also make sure you select the Windows of the drivers for your Windows operating system. Click on this link to download the drivers: - http://support.dell.com/support/downloads/index.aspx?c=us&l=en&s=gen

Jan 21, 2013 | Dell Dimension 2400 PC Desktop

Tip

How to do Fast and unattended Setup of OS in multiple machines


<span> <p><span>Here I have an Idea for primary setup of a large lab quickly. Suppose you have to setup a lab where have more than twenty or thirty system but must setup it quickly. At that time if you don't have enough CD Rom drive or not enough OS installer CD then the task will take a long time. To save time at the same moment I like to prepare an unattendent operating system installation. Before this task I must check for presence of some requirement.</SPAN><br> <p><span> </SPAN><br> <p><span>Verify for unattended Installation:</SPAN><br> <p><span><span> </SPAN>To perform an unattended installation from a CD-ROM, the following conditions must be met:</SPAN><br> <p><span>The computer must support booting from a CD Rom<span> </SPAN>The unattended answer file must be renamed to Winnt.sif and copied to a floppy disk so Setup can access it. So must need a floppy disk drive.</SPAN><br> <p><span>The answer file must contain a valid [Data] section. This is explained later in this article.</SPAN><br> <p><span> </SPAN><br> <p><span>Before installation it has some conditions:</SPAN><br> <p><span><span> </SPAN>1&gt; the installation is limited to a single partition.</SPAN><br> <p><span><span> </SPAN>2&gt; you cannot specify third-party drivers during Setup </SPAN><br> <p><span> </SPAN><br> <p><span>Prepare For an Unattended Installation:</SPAN><br> <p><span><span> </SPAN>To prepare your computer for an unattended installation from a CD-ROM, I've followed these steps</SPAN><br> <p><span>First I've created a Folder in local drive & shared it. Then I create setup manager.</SPAN><br> <p><span>I install Setup Manager by following these steps:</SPAN><br> <p><span>I Open My Computer, and then open the Support\Tools folder on the Windows XP CD-ROM.</SPAN><br> <p><span>Double-click the DEPLOY.CAB file to open it </SPAN><br> <p><span>On the Edit menu, click Select All.</SPAN><br> <p><span>On the Edit menu, click Copy to Folder.</SPAN><br> <p><span>Click Make New Folder. Type the name that you want for the Setup Manager folder, and then press ENTER. For example, type setup manager, and then press ENTER.</SPAN><br> <p><span>Click Copy.</SPAN><br> <p><span>Open the new folder that you created, and then double-click the setupmgr.exe file. The Windows Setup Manager Wizard starts.</SPAN><br> <p><span></SPAN> <br> <p><span></SPAN></SPAN> <br> <img src="alokerdas_9.jpg"> <br> <p><span>Then I Use Setup Manager to Create an Answer File.</SPAN><br> <p><span>I open the setup manager & go to create a new answer file.</SPAN><br> <p><span>Then I go to the unattended installation & windows version option.</SPAN><br> <p><span>I have selected the fully automated option & create an answer file.</SPAN><br> <br> <br> <img src="alokerdas_10.jpg"> <br> <p><span>If you want Windows Setup to delete all partitions on the hard disk and to create a new partition, you must include the Repartition command in the Winnt.sif file. Under [Unattended], insert a new line, and then type "Repartition=Yes"</SPAN><br> <p><span>If you omit this line, you are prompted for the installation partition.</SPAN><br> <p><span> </SPAN><br> <p><span>Add a [Data] section with the following entries to the unattended answer file:</SPAN><br> <p><span>Unattended Install=Yes - Value must be set to "yes"</SPAN><br> <p><span>MSDos Initiated=No - Value must be set to "no" or Setup stops during the graphical portion of Setup<span> </SPAN></SPAN><br> <p><span>Auto Partition=1 - If the value is set to 1, the installation partition is automatically selected. If the value is set to 0 (zero) you are prompted for the installation partition during the text portion of Setup.</SPAN><br> <p><span>Save the unattended answer file as Winnt.sif on a floppy disk.</SPAN><br> <p><span>Insert the Windows CD-ROM into the CD-ROM drive, and then insert the floppy disk into the floppy disk drive.</SPAN><br> <p><span>Change the boot order in the CMOS so that the CD-ROM is first in the list.</SPAN><br> <p><span>Restart your computer. When Setup is started from the CD-ROM, the Winnt.sif file located on the floppy disk will be used to complete the unattended installation.</SPAN><br> <p><span> </SPAN><br> <p><span>This is an easy process to save time & effort.</SPAN>

on Feb 15, 2011 | Computers & Internet

Tip

How to do Fast and unattended setup of OS


Here I have an Idea for primary setup of a large lab quickly. Suppose you have to setup a lab where have more than twenty or thirty system but must setup it quickly. At that time if you don't have enough CD Rom drive or not enough OS installer CD then the task will take a long time. To save time at the same moment I like to prepare an unattendent operating system installation. Before this task I must check for presence of some requirement. Verify for unattended Installation: To perform an unattended installation from a CD-ROM, the following conditions must be met:The computer must support booting from a CD Rom The unattended answer file must be renamed to Winnt.sif and copied to a floppy disk so Setup can access it. So must need a floppy disk drive.The answer file must contain a valid [Data] section. This is explained later in this article. Before installation it has some conditions:

1> the installation is limited to a single partition.

2> you cannot specify third-party drivers during Setup Prepare For an Unattended Installation:

To prepare your computer for an unattended installation from a CD-ROM, I've followed these stepsFirst I've created a Folder in local drive & shared it. Then I create setup manager.I install Setup Manager by following these steps:I Open My Computer, and then open the SupportTools folder on the Windows XP CD-ROM.Double-click the DEPLOY.CAB file to open it On the Edit menu, click Select All.On the Edit menu, click Copy to Folder.Click Make New Folder. Type the name that you want for the Setup Manager folder, and then press ENTER. For example, type setup manager, and then press ENTER.Click Copy. Open the new folder that you created, and then double-click the setupmgr.exe file. The Windows

Setup Manager Wizard starts: alokerdas_2.jpg

Then I Use Setup Manager to Create an Answer File.
I open the setup manager & go to create a new answer file.
Then I go to the unattended installation & windows version option.
I have selected the fully automated option & create an answer file.


alokerdas_3.jpg

If you want Windows Setup to delete all partitions on the hard disk and to create a new partition, you must include the Repartition command in the Winnt.sif file. Under [Unattended], insert a new line, and then type "Repartition=Yes"
If you omit this line, you are prompted for the installation partition.

Add a [Data] section with the following entries to the unattended answer file:
Unattended Install=Yes - Value must be set to "yes"
MSDos Initiated=No - Value must be set to "no" or Setup stops during the graphical portion of Setup

Auto Partition=1 - If the value is set to 1, the installation partition is automatically selected. If the value is set to 0 (zero) you are prompted for the installation partition during the text portion of Setup.
Save the unattended answer file as Winnt.sif on a floppy disk.
Insert the Windows CD-ROM into the CD-ROM drive, and then insert the floppy disk into the floppy disk drive.
Change the boot order in the CMOS so that the CD-ROM is first in the list.
Restart your computer. When Setup is started from the CD-ROM, the Winnt.sif file located on the floppy disk will be used to complete the unattended installation.

<SPAN style="FONT-FAMILY: 'Courier New

on Feb 15, 2011 | Computers & Internet

2 Answers

Cd rom


First use the following steps:

Use the following link, scroll a little and click on Fix It

http://support.microsoft.com/kb/314060

Click Run in the File Download dialog box and follow the steps in the wizard

When completed restart the computer and check the CD/DVD drive

(you may need to run Fix It twice)


Mar 10, 2010 | HP Pavilion a305w (DM181AR) PC Desktop

2 Answers

My dell studio 1535 will not open a cd, when I insert the cd nothing happens. I just had a new hard drive installed..


If the CD-ROM will boot from a recovery CD, then this would indicate a Windows software problem instead of a CD-ROM issue. It can usually be attributed to a corrupt driver. To reinstall the drivers:

1. Go to Start>> Right click My Computer>> Properties>> Hardware>> Device Manager.

2. Expand DVD/CD-ROM Drives line item.

3. Right click on the items below and select Uninstall drive on the resulting menu.

4. Re-boot the system and Windows will automatically detect the CD-ROM drive and re-install the drivers for you.

Try a different media - some brands will just not work correctly with a given CD-ROM drive. Watch out for compatibility problems with Maxell, Memorex and Macromedia CDs.

Check for unusual noises, maybe a ticking type noise. This could indicate a cracked disk. Or, the media may not be seated correctly on the spindle.

Is the access light on?

Is the CD Clean?

Check error messages in Event Viewer. Here's how:

Go to Start>> Settings>> Control Panel>> Administrative Tools>> Computer Management (or Event Viewer)

Check your manufacturer's web site for software updates and drive updates. Check for QSI firmware updates.

For DVD - Are you trying to write to a DVD that is READ ONLY?

If all has failed, you may be faced with performing a complete Operating System Recovery or Repair (preferred).

If nothing above has worked for you, then you may need to take the drive in to a service facility for repair or replace the drive.

Jan 01, 2010 | Dell Studio 1535 Notebook

2 Answers

Canon MP500 all in one printer is not compatible with Windows Vista. Is there a solution for this problem, or do I need to buy a different printer?


My Canon PIXMA MP500, purchased in mid-2006, came with the (then) ScanSoft OmniPage SE2 software on a CD. The PC had WinXP Installed. I had no use for the ScanSoft it so I made no effort to install it.
Fast Forward:
Two PC crashes later, July 2009. Using Win Vista Home Premium
LOST, important WinWord document file, only a hard copy available.
I tried to recover, scanning the "Xerox" copy. The SE Version of OmniPage was very complicated but I succeeded in producing a replacement *.doc file.

It appears that newer editions of WinVista contain the right printer drivers for this Canon Model.

Apr 26, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Install dvd rom and remove one of the cd rom's


hi! replacing cd room,open your cpu cover by two quick lock bolt at back side of your pc right side,show on figure w/ arrow where the quick lock bolt.c1c13bc.gifthen pull out cover and you'll cd rack inside your cpu as shown on figureba392e9.jpg release 2 lock screw,and pull out i.d.e cable on cd room terminal also the audio cable next to leftside if have one,next the front cover of cpu thats locking your cd room theres a cliff lock on side opposit of the fron cover lift it by flat screw driver slowly and careful it might broke,after cover was detouched,don't remove any wire connection on front cover,pull out your cd room replace by dvd rom and connect all what has been disconnect on cd room put back front cover,and connect pwer,audio and ide cable again then try to switch on your dvd rom is a plug and play you can install your dvd installer and follow wizard instruction and click finish...regards

Mar 27, 2009 | Dell Dimension 2350 PC Desktop

1 Answer

How do I turn the wireless on the Dell Inspirion 8200


there is no on-off switch for the wireless on the dell inspiron 8200 if I recall correctly. Make sure:

1. The mini-PCI slot (might actually have to open the little door on the back of the laptop) contains a wireless card

or

2. right click on "my computer", properties, hardware tab... device manager. See if there are any devices listed (yellow "!") that do not have drivers installed. Go to http://support.dell.com and download drivers for your wireless card and install them.

Feb 27, 2009 | Sharp Dell Inspiron 8200 15.0 ASV UXGA -...

1 Answer

Pcs card modem


Uninstall any drivers you may have installed previously for that device.
Reinstall the driver but htis time:
1)Open Windows Explorer.
2)Locate the application executable.
3)Right click the executable and click the Properties option.
4)Select the Compatibility tab.
5)Select the Run This Program in Compatibility Mode option for Windows XP

Best regards,
PC REPAIR

Oct 10, 2008 | Microsoft Windows Vista Ultimate Edition

5 Answers

Windows xp service pack 2


Hi 1. Click Start, click Run, type regedit in the Open box, and then press ENTER. 2. Locate and click the following registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CDRom 3. To disable automatically running CD-ROMs, change the Autorun value to 0 (zero). To enable automatically running CD-ROMs, change the Autorun value to 1. 4. Restart your computer. NOTE: This method disables automatically running CD-ROMs. If you want to disable automatically running CD-ROMs depending on the CD-ROM that you insert in the CD-ROM drive, you can press and hold down one of the SHIFT key while you insert the CD-ROM. This may help. Good Luck

Sep 12, 2007 | Microsoft Windows XP Professional With...

Not finding what you are looking for?

Open Questions:

See all Novatel MiFi 2200 Mobile WiFi Hotspot Modem Questions

Novatel MiFi 2200 Mobile WiFi Hotspot Modem (Verizon Wireless) Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Novatel Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

ray gallant

Level 3 Expert

41433 Answers

NETBOY

Level 1 Expert

18 Answers

Are you a Novatel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...