Question about D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE)

1 Answer

I can not get to the router - the ip address( will not come to the web browser - i am on a mac book pro - have tried in Safari and Firefox have tried on the pc as well. HAve reset router and separate modem - can you help?

Posted by on

  • raj6325 Mar 20, 2011

    Thanks Geekman! My problem continues despite your generous help. I cant get the router to reset - as in the lights wont flash no matter how long I hold reset and the other problem is my browser says can not find server... could be time to go shopping? I suppose i could try a config proceedure through the pc - do you know that routine?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • D-Link Master
  • 32,281 Answers

If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your computer's LAN port, open a browserand enter the D-Link's configuration URL. OR open the browser on your laptopand enter the D-Link's configuration URL..
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings.

Posted on Mar 20, 2011

  • raj6325 Mar 20, 2011

    Thanks Geekman!I appreciate your generosity. Have tried to reset router but no flashing lights are happening no matter how long I press - suspicious?....also the browsers are saying can not find the address....time to go shopping I wonder?

  • Chris Hingee
    Chris Hingee Mar 20, 2011

    I think you are right. It is time to buy a new wireless router.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I enter a mac address?

hi Buss.
Open a web browser and enter <IP address of your wireless route> (the default IP for most Belkin routers is and press Enter. Click Login button to open the login screen. When the login window appears, enter a password. Select Wireless ->MAC Address Control from the menu on the left.24 Oct 2010

How to add MAC address to wireless router -
plus try this link.
How do enter mac address Google Search

Dec 02, 2017 | MAC Computers & Internet

1 Answer

10 rca tablet keeps losing connection have to shut down to get it to connect

Try setting it to a static IP address.
open router settings (type your routers ip address in web browser I.e. admin name and password are normally on the router)then lan settings
set the MAC address of tablet as static noting the IP address ( for example),subnet mask (normally something like 255,255,255,0),etc.( to find your tablets MAC address settings then about)
when you have set the router up, on tablet tap the settings then wifi, modifiy settings tick use static scroll down and enter new ip address ,subnet mask default gateway(your routers in address).
its easy then it looks.

Sep 13, 2017 | Tablets & eReaders

3 Answers

How to change admin username & password on cisco 2911 router

agree that turn off your modem first before trying to open the router's setup page. By default, there's no username and the password is admin on Cisco 2911

Nov 04, 2011 | Cisco 2911 Router

2 Answers

Need password to my cisco wireless router

For that press RESET button of your router for 10 seconds then it will automatic restart and reset. then connect router to computer lan port with lan cable. then you can access it with default ip addresshttp;// or Type user as 'admin" and password as "admin" or "1234" or "password" or blank then you can see configuration page of router. Then click on wireless->security then note down the password.It's your password to connect wireless.
Let me know if you need further assistance. thanks for using fixYa.

Oct 17, 2011 | Cisco Linksys E1000 WirelessN Broadband...

1 Answer

Help configuring my router

Hi Friend,

Please follow the steps in order to resolve the issue:

Make sure you have connected each and every wire/cables to their respective ports/places.

1. Open web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is At the LOGIN, click LOGIN and click on Advanced Setup.
2.Click on WAN and then click Dynamic IP on the left hand side, then select Dynamic IP (Cable Modem) and click on Apply.
3.If your ISP has registered the MAC Address of your computer that you are managing the router from click on Clone MAC Address. This will copy your computers MAC Address to the Router. If you are not managing the computer from the computer with the registered MAC Address make sure you enter the registered MAC Address manually.
4.Click on Apply.

After saving the settings you have to power cycle the modem and router(Turn off the modem and router for 15-30 seconds).

* Reconnect the modem first and wait for it to boot up.
* After the modem has booted up reconnect the Router. Open the web browser and type the IP address of the TW100-S4W1CA in the address bar. The default IP address is At the LOGIN, click LOGIN, then click on Advanced Setup.
* Go to System then Status on the left hand side of the screen
* If there is no WAN IP listed in the WAN section on the right hand side of the screen, click Renew and wait for it to come back with an IP address

I hope this will resolve the issue.


Dec 07, 2010 | Trendware TRENDnet TW100 S4W1CA...

1 Answer

No longer have the book to connect to wireless

Step 1: Open your web browser and type in the IP address of the router ( by default).


Step 2: Enter the username (admin) and password (blank by default), and then click Ok or Log In .


  • How do I find my routers IP Address, in Windows XP?
  • How do I reset my router back to the factory default settings?

    (NOTE: To reach the configuration page of your D-Link router in Mac OS, you will need to use a Java compatible browser such as Firefox or Camino.)

  • If you need more help come back.Post / thumbs / testimonial are welcome!

    Nov 20, 2010 | D-Link 4-Port Ethernet Broadband Router...

    1 Answer

    D-Link DI 524 behind VNC access remotely - Need help....

    Open a browser and type in htp:// to access your router's web management interface. Enter the username and password (default is username admin and no password)
    Go to the Advanced Tab and Virtual Server
    Private IP=IP Address of your Home notebook
    Protocol Type=TCP
    Private Port=5800
    Public Port=5800
    Set Schedule as you like
    Enable the rule and click Apply.

    To access you Home notebook from anywhere other than your house, go to

    Next - remote management of the router.
    The IP address that you enter on the remote management page is the IP address that is allowed to connect to the remote management. If the is the IP address of your office, this should work. Be sure you apply a password or anyone going to will have access to you router, I also recommend changing the port from 80 to 8080 so that has to be typed to access the remote management interface.

    Jan 02, 2009 | D-Link AirPlus DI-524 Wireless Router

    1 Answer

    Connecting Ipod touch 8(GB) to Wi-fi

    sometimes the wifi systems only work with windows, the ipod only uses safari and thats what you see on the error. Its connected but safari cannot open it since it is not windows

    Dec 13, 2008 | Computers & Internet

    1 Answer

    I'm trying to hook up your Western Digital 500GB to my Mac and I can't get the icon on my screen. I'm connecting with a firewire cable that was provided. I also tried the USB cable to no avail.

    I am able to communicate between my iMac and myworldbook.
    The procedure is as follows (see screen shots below):
    1.  Determine the ip address of MyWorldBook
    2.  On Safari address line enter the command:      "smb://"                  { being the IP address of myworldbook}
    3.  Select "Public" when ask which volume to mount
    The hard drive will show up in Finder under SHARED below DEVICES.  
    You can automate this task and have it execute at startup. 
    To determine the IP address, access the HD through your web browser (see Western Digital web site for information on shared storage manager.  see appendix a of user's manual

    Feb 27, 2008 | Western Digital 500GB My Book World...

    Not finding what you are looking for?
    D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE) Logo

    47 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top D-Link Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2263 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18424 Answers

    Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides