Question about Rohl A3608LMPN Single Lever Country Kitchen Faucet with Metal Lever Handle...

2 Answers

How do I replace the o-ring on this faucet? Are instructions available?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Remove the 2mm screw from the back of the spout. Remove Old O-ring set from base of spout and install new set. ROHL customer service can provide. Call 800.777.9762

Posted on Mar 22, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 528 Answers

Could not fine that model number but maybe this will help you http://www.rohlhome.com/search/Default.aspx

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I fix a leaky Price Pfister Treviso 49D faucet.


Download the instructions from the manufacturer.

Dec 28, 2014 | Price Pfister Plumbing

Tip

Ball-Type Single Lever Faucets


BALL-TYPE SINGLE-LEVER FAUCETS

  • The single-handle faucet with a ball inside to control both hot and cold water may either leak at the spigot or at the handle. A handle leak is usually caused by improper adjusting-ring tension. Simply adjust the tension to stop the leak. Leaks at the handle can also result from a worn cam gasket. Dripping from the spigot is usually caused by worn spring-loaded, soft rubber seat assemblies.

  • Parts for ball-type faucets are available in kits. Get the spring/seats kit for spigot leaks, or the complete kit for handle leaks. It may be advisable to use the complete kit to replace all working parts of the faucet at the same time. In any case, you'll need a kit containing the spanner/hex wrench for removing the handle (hex end) and turning the adjusting ring (spanner end).

  • Without turning the water off, loosen the handle set screw. Slide the handle from its stem.

  • For a handle leak, try using the spanner wrench to tighten the adjusting collar. Tighten it by turning the wrench and collar clockwise until the faucet doesn't leak when it is turned on and off. If the adjustment is too loose, the faucet will leak. If you turn it too tight, the handle will be hard to move. When the adjusting ring cannot be turned with the wrench, it is corroded. At this point, you will need to remove the cap to free the adjusting ring. (See next step.) You must turn the water off before removing the cap! Apply penetrating oil to the threads, remove the ring and clean all parts before reassembling.

  • Install the seats. For faucet leaks at the spigot, you must install new rubber seats and springs. You must turn off the water to make this repair. Unscrew the chrome cap by turning it counterclockwise. If it won't turn easily, wrap electrical tape around the cap and turn it with pliers. The adjusting ring, which is threaded into the cap's center, will come off with it. For a seats/springs replacement, pull the ball up and out by its stem. The gasketed cam will come with it. Now you can locate the two rubber seats and springs inside the faucet body. Remove them with pliers or yours fingers and install the new ones. The springs go into the holes first, and the cupped sides of the seats fit over the springs.

  • Service the ball. If the ball is dirty or coated with scale, clean it or replace it with a new one. Both plastic and brass balls are available, but use a plastic one if your home has hard water.

  • Reassembly. Put the ball and cam back into the faucet with the slot in the side if the ball fitting over the pin in the faucet body. Then make sure the tab on the cam slips down into the notch in the body. Not aligning the tab and notch is the number one cause for a faucet leaking after it is repaired. Finally, screw on the cap and adjust the ring as described in Step 2. If a properly adjusted ball-type faucet leaks at the cap, the cam and gasket must be replaced.

  • Swing spouts. If a single-lever ball faucet leaks at the base, you should replace the O-rings. Remove the spout-retaining parts, as well as the spout. Wrap the spout-retaining nut with electrical tape to protect it, and remove the nut with a wrench or pliers by turning counterclockwise. Remove the spout by pulling it up and side-to-side. One or more O-rings should now be exposed. Take the O-rings to your hardware or home center store to get matching O-rings for replacement. Clean any scale that appears on the spout base, faucet body, and the inside of the swinging spout. Install the new O-rings and reverse the steps above to reassemble the faucet.

on Jan 16, 2010 | Plumbing

2 Answers

Kraus kgw-1700 waterfall faucet cartridge replacement


The Kraus KGW-1700 has a ceramic cartridge inside it. Part # A507200N-T. The flow restrictor below it is part # A519234N. If the faucet is leaking, the trouble shooting section on end of installation instruction suggests to tighten the adjustment ring or cap. it is located on top of the ceramic cartridge. Kraus is www.Kraususa.com Their phone: 800-775-0703 To replace or clean under the cartridge, the manual doesn't say HOW TO take off the adjustment ring over the cartridge. It is not obvious as their is no place to loosen it...it has an internal ring setting for octagon socket. The only part I am able to take off is the handle assembly with a Hex wrench (17mm). I am looking for online directions how to remove adjustment ring but do not see one available.

May 06, 2013 | Plumbing

1 Answer

I have replaced the cartridge on my single faucet single handle moen kitchen tap, but water still leaks out under the central area that holds the cartridge. Is there a schematic that shows where and what...


did you replace the spout, -o- ring's. they would cause a leak to show up there as well.no need to pull cartridge again,just handle,and then pull up spout and that is it. there should be a small packet of lube w/ -o- ring kit,lube up around shaft and new -o- ring's.available at any good hrd ware store

Apr 19, 2010 | Moen 7310 Legend Single-Handle Kitchen...

2 Answers

Need "0" rings for delta 470 faucet


You should be able to find them at lowes or any other hardware store.

Jan 27, 2010 | Delta Faucet Delta 470-BL-DST Signature...

3 Answers

Leak from hot water faucet



Replace the water faucet. Contact the company the unit was sold or installed by. they should have the part in stock.

Dec 14, 2009 | Bunn Automatic Coffee Brewer CWTF15 1

1 Answer

I cant stop my Moen single lever kitchen faucet from leaking. how can I fix it?


1. If it's "leaking" from the body then, the O-Rings between the body of the faucet got gunked up with minerals from your water. This interferes with the seal.
The answer is to take some grit cloth/very fine sandpaper and clean the inside of the spout body. Wipe clean. I would also suggest replacing the O-Rings on the faucet body, but at the very least wipe the O-rings and faucet body clean.
THEN: lubricate the inside of the spout body AND the O-Rings with silicone grease. It's translucent and readily available and the only thing I would ever use for a faucet repair. NOT plumber's grease, NOT WD-40.
Reassemble and enjoy.

2. If it's dripping, the you need a new cartridge. You can get them for FREE from the hardware store if you have the old cartridge to trade them. The problem is that Moen cartridges are water-sealed into place and you need a special tool to break that water seal. The special tool (just a tiny piece of specifically shaped plastic, really) comes, you guessed it - with the new cartridge.
Two possible solutions: a) bite the bullet and just buy the cartridge (~$25) or buy a Moen cartridge puller, usually available from the hardware store as well for about the same price. Ask, they might even lend you one.
The point of whichever tool you end up with is to rotate the cartridge itself inside the faucet body to break the water seal so that you can pull it out with a set of pliers. There will be a retaining clip to pull out as well.

www.plumbingpartsdepot.com/moen7300.gif
http://img2.timeinc.net/toh/i/a/plumbing/faucets-toilets-07.jpg
Good Luck.

Sep 08, 2009 | Moen 87530 Touch Control Single Handle...

1 Answer

Jacuzzi undermount sink


Your sink is clearly made to be undermounted. No trim ring available. With all of the choices now available for sinks and faucets I would recommend that the jacuzzi sink be removed and that you select a new sink and faucet set to your liking. good luck.

Jan 21, 2009 | Jacuzzi Kitchen Iron Black Finish...

2 Answers

Water pooling at base of delta waterfall faucet spout


I have the same problem. The part that is needed is found with a simple Google search for "Delta Waterfall RP22934 O-Rings"

Simply Slide the collar up at the base of the spout where it swivels.

Gently open the now exposed split plastic retainer so that the tabs near the bottom are pulled from their holes.

Lift the spout off the base to expose the o-rings.

Replace with the new o-rings and apply o-ring grease.

Re-assemble and enjoy a dry sink area.

Nov 25, 2008 | Delta Faucet Delta 172-SSWF Waterfall...

Not finding what you are looking for?
Rohl A3608LMPN Single Lever Country Kitchen Faucet with Metal Lever Handle... Logo

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rohl Plumbing Experts

Donni Steen

Level 3 Expert

659 Answers

obsteiner

Level 2 Expert

190 Answers

john h

Level 3 Expert

12104 Answers

Are you a Rohl Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...