Question about Fun Rise Zoooos DVD System

Open Question

Every time I try to set up the zoooos dvd game, as I begin to enter the set up mode by pressing the red button, the system says "congratulations, your dvd player has been sucessfully set up.", but I didnt do anything. Then, as we try to play, none of the buttons work. Also, I did manage to set it up once, nothing I did was different though. We have a Samsung 1080P7.

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: won't work on our xbox

Microsoft codes - BBRGY or RBRGY You probably have these XBOX Codes - BBRGY or YRGRG or RBRGY or GRGRG. All else you can always do the direct entry method a list of codes is on the dvd. Good Luck

Posted on Nov 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set day and date? All else is set


SETTING THE TIME
Note:
When the signal is being received (as indicated by the atomic indicator signal)
you will not be able to make any setting or adjustments to the clock.
1. To begin setting the clock, press and hold the MODE button located on the back
of the clock for 3 seconds to enter the TIME setting mode.
2. The HOUR digits on the display will begin to flash. Press the UP or DOWN button
to set the HOUR in one hour increments. Press the UP or DOWN button as
necessary until the correct hour is displayed.
Note:
If you are in the 12 hour time format, be sure you are in the correct AM or PM
time period. When the "PM" indicator appears on the display, the time displayed is in
the 12 hour period between 12:00 noon and midnight.
3. Press the MODE button again to exit the HOUR setting and enter the MINUTE
setting mode.
4. The MINUTE digits on the display will begin to flash. Press the UP or DOWN
button to set the MINUTES in one minute increments. Press the UP or DOWN
button as necessary until the correct minute is displayed.
5. Press the MODE button again to exit the MINUTE setting and enter the
SECONDS setting mode.
6. The SECONDS digits on the display will begin to flash. Press the UP or DOWN
button to reset the SECONDS to zero.
7. Press the MODE button again to exit the time setting mode. The clock will
automatically return to the normal time display mode.
Note:
If no settings are made within 30 seconds, the clock will automatically return
to the normal time display mode. If this happens, you will need to start the time
setting procedure again from step

SETTING THE CALENDAR
1. Press the MODE button (located on the back of the clock) twice (do not hold the
mode button) to display the CALENDAR.
Note:
The YEAR icon will be shown on the display indicating you are in the year
display mode.
2. Press and hold the MODE button for 3 seconds to enter the CALENDAR setting
mode.
3. The YEAR digits on the display will begin to flash. Press the UP or DOWN button
to set the YEAR in one year increments. Press the UP or DOWN button as
necessary until the correct year is displayed.
4. Press the MODE button again to exit the YEAR setting and enter the MONTH setting
mode.
5. The MONTH digits on the display will begin to flash. Press the UP or DOWN button
to set the MONTH in one month increments. Press the UP or DOWN button as
necessary until the correct month is displayed
6. Press the MODE button again to exit the MONTH setting and enter the DATE
setting mode.
7. The DATE digits on the display will begin to flash. Intermittently pressing and
releasing the UP or DOWN button to set the DATE in day one increments. Press
the UP or DOWN button as necessary until the correct date is displayed.
Note:
The day of the week will automatically set according to the month, date, and
year.
8. Press the MODE button again to exit the calendar setting mode. The clock will
automatically return to the normal time display mode.
Note:
If no settings are made within 30 seconds, the clock will automatically return to
the normal time display mode. If this happens, you will need to start the calendar
setting procedure again from step 1

Dec 09, 2014 | Westclox 70026A LCD Atomic Digital Alarm...

1 Answer

I have a gpx hm3817dtblk shelf system and i was wondering if you can get the alarm to play a cd instead of the radio or if you can do either one and how? Or does it even have an alarm?


The manual:

http://www.retrevo.com/support/GPX-HM3817DT-manual/id/1183ag710/t/2/

Page 6>>>>

Setting the Clock
a. Press the STANDBY button until the unit is in standby mode.
When the unit is in standby mode, the STANDBY button will be red.
b. Press the CLK ADJ. button. The time will begin to blink.
c. Press the HOUR and MINUTE buttons to adjust the hour and minute.
d. Press the CLK ADJ. button to set the adjusted time.
Setting the Alarm
a. Press the STANDBY button until the unit is in standby mode.
When the unit is in standby mode, the STANDBY button will be red.
b. Press the ALARM SET button. The time will begin to blink.
c. Press the FUNCTION button to seleect CD, Radio, AUX, or Buzzer.
For Buzzer mode, the display will not show any indication.
d. Press the HOUR and MINUTE buttons to adjust the hour and minute.
e. Press the ALARM SET button to set the adjusted alarm time.
An alarm clock icon will appear on the LCD Display when the alarm is set.

Jan 03, 2011 | GPX HM3817DTBLK Shelf System

1 Answer

How can I adjust the screen so I can see the score of the football game it is cut off on my Panasonic TH-50PX75U


Hello
To do this you have to enter into the service mode, ie, factory setting modes, which oly will allow you to do the screen adjustments. Your TV needs vertical S-Correction, to avoid lower side stretch. Four methods to enter into the service mode are given here . Just try OK.

In Sound-Menu Low-tone-regel to MAX and

High-tone-regel to MIN. Press 'F' button on TV.

Then press VOL- on TV and REVEAL on RC in

some time. Select: red and green buttons.

Adjust: yellow and blue buttons. Store:
'STR'. Exit: 'N' on RC.

In Sound-Menu Low-tone-regel to MAX and

High-tone-regel to MIN. Press VOL- on TV

and RESET on RC in some time. Select: red

and green buttons. Adjust: yellow and blue
buttons. Store: 'STORE'. Exit: switch off.

ON: Press simultaneously 'OFF TIMER' on RC

and 'CH.UP' local.

OFF: Press simultaneously 'OFF TIMER' on RC
and 'VOL-' local.

Simultaneously press 'RECALL' on RC and
'VOL-' local. Exit: 'NORMAL' on RC.

After entering into this mode, be careful not to spoil the set. Mark all the initial values on a paper for refernce, and begin to chage the values. You may only have to chage the value of "SC".



Nov 22, 2010 | Samsung TXJ3678 36" TV

1 Answer

Do you have the Nintendo Tetris game watch instructions?


Right red button toggles between game and watch. In game press right blue button to begin game with sound, left to begin game without sound. Use blue buttons for left, right, rotate(up) and drop(down). Clear twenty rows to go to next level. High score is recorded. In time mode press and hold left red button to set, Use left to set hours and right blue to set minutes. Press left red to set.

Oct 06, 2010 | Watches

1 Answer

We thought we had it working. But when you push the Zoooos controller it will show a number in the left hand upper corner (like, 5, 6, 7) and not move you into the next screen. Do we need to reprogram...


The controller is a universal remote. Complete instructions for setting it up to control various DVD player models are accessible at the beginning of every ZOOOOS DVD.
When the controller was manufactured it was compatible with virtually every model of DVD player, however, some newer models may not be compatible.
It's normal for some players to flash numbers on the screen while operating the controller. It does not affect performance.

Aug 08, 2010 | Fun Rise Zoooos DVD System

1 Answer

How do I auto set up for my zoooos controller


Auto Setup automatically searches for the right code for your DVD player. For the most popular DVD player models, Auto-Setup takes a few minutes or less, however, less-common models can take much longer or this method may not work at all.

  1. Find the Auto-Setup instruction page in the on-screen Setup Guide. Your DVD player must be on the Auto-Setup instructions for this method to work properly.

  1. Engage Auto-Setup mode: Hold down the Red button until the setup light turns off. Continue holding the Red button and press the Yellow button three times, then release both buttons. If you’ve done this correctly the light will turn back on and remain on until setup mode is exited. When the setup light remains on, the controller is in setup mode.

  1. Wait for a message from your DVD player. Even though you can’t see anything happening, the controller is actually loading and testing various codes. When the right code is found, your DVD player will tell you to press the Home button. If your player doesn’t respond within about 10 Minutes or the time on the estimate chart, press the Home button to exit this method, and use the Direct Entry method instead.

  1. When the DVD player instructs you to press the Home button, be sure to do so before the onscreen timer runs out. If you miss pressing the Home button before the timer runs out, go ahead and wait until a message from the DVD tells you what to do. If you have not yet pressed the Home button, the DVD will instruct you to press the Back button to back up to the code you missed.

Jan 09, 2010 | Fun Rise Zoooos DVD System

1 Answer

Won't work on our xbox


Microsoft codes - BBRGY or RBRGY You probably have these XBOX Codes - BBRGY or YRGRG or RBRGY or GRGRG. All else you can always do the direct entry method a list of codes is on the dvd. Good Luck

Apr 22, 2009 | Fun Rise Zoooos DVD System

1 Answer

Magnovox MWR20V6 will not begin recording when it should.


This is more a work-around than a solution, as the unit is failing to function normally; however, having the identical problem I observed that the unit is failing to power on at 2:00 minutes before beginning recording, a necessary step to record to DVD.

My work-around is the following:

1) Set up the timer, inputting necessary date, time, etc. as normal. With the unit still powered on, start the timed recording mode by pressing timer set, as normal. You will see the red clock icon and the DVD logo iluminate on the VFD.

2) Press the Standby-On power button. This will power the unit on in VCR mode. You should at this time be unable to switch from VCR to DVD mode since the DVD is still in timer mode. LEAVE THE UNIT POWERED ON in this manner. The timer will function and the DVD will record normally.

I have no clue why my unit suddenly forgot how to power up on its own in order to record to DVD. If anyone has an answer for that one please post!

Tom Gee

May 03, 2008 | Philips Magnavox MWR20V6 DVD Recorder/VCR

Not finding what you are looking for?
Fun Rise Zoooos DVD System Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fun Rise Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75814 Answers

ray gallant

Level 3 Expert

42984 Answers

Are you a Fun Rise Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...