Question about Audiovox (JHHO-110) Headphones

2 Answers

Audiovox Infrared Headphones

We purchased several sets of these headphones to use in our vehicle with an after-market DVD player. One set of headphones suddenly produces no sound at all. We have changed the batteries and have checked for correct battery installation. Any other suggestions, as these are not much more than a year old and I hate to have to purchase a new set. Thanks so much! We have 5 sets of Audiovox Infrared Headphones that we use in our suburban for the kids to watch movies. About 3-4 months after we purchased them, we were driving along and all of a sudden they all stopped working. We've changed the batteries, and are quite unsure what else to even try. They power on and off, but do not pick up any of the sound from the DVD player. We're about to head off on a 1700 mile trip with our six kids, and I'm feeling desperate to figure out what to do!!!

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Audiovox Master
  • 19,396 Answers

Ask replacement to Audiovox here is Contact Us

Posted on Aug 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Be sure that a correct pairing was done.

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Sylvania wireless headphones



Instructions
1
Set up the transmitter. Wireless headphones rely on a transmitter that sends audio via infrared or radio waves to your headset. Use the digital audio output (coaxial or optical), RCA outputs (red and white) or headphone jack on your TV to connect the transmitter. The connection will depend upon which outputs are available on your TV and/or the transmitter.
2
Use an RCA-to-headphone adapter. If you don't have a headphone jack on your TV and the transmitter includes only a headphone connection, connect an RCA-to-female headphone connector. This will allow you to plug the wireless transmitter into the female headphone end and then hook the RCA ends into your television's audio outputs. You may also need a 3.5 mm (mini jack)-to-1/4-inch adapter if the headphone plug on the transmitter doesn't match the television jack.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html
3
Set the transmitter on top of, or next to, the television. For infrared transmitters, you'll need a direct path between the headphones and the transmitter. Placing the transmitter on or near the TV will allow you to take advantage of the clear path you already have.
4
Plug in the transmitter and turn it on. Charge the headphones if necessary.
5
Turn on the headphones. Adjust the volume and settings and you're ready to watch TV.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html

good luck

Nov 14, 2013 | Sylvania SYL-WH930GB Wireless Headphones

2 Answers

Where do i get a manual for the Audiovox Advent AW770 Wireless Headphones?


I found the manual linked on the Amazon Product Page for the headsets. You can download it here:
http://www.amazon.com/Audiovox-Advent-Wireless-Headphones-Silver/dp/B00000J1GA

May 05, 2011 | Audiovox Headphones

2 Answers

My television does not have an audio output so i connected the rs 110 to my cable box and it works fine...however i also have a dvd player connected to the tv video input and for some reason i cannot hear...


Are you using AV cables from your DVD player to your TV? (the yellow,red and white ones) If you are the is a way to do this, since you have no other outputs at all is you will have to make one. With the purchase of a couple adapters and an additional av (audio only cord which is red and white) you can do this. The first adapter you need looks like this. http://www.globalgrabber.com/product/4507930-5mm-stereo-plug-2-rca-plugs-jacks/ You will remove the red and white AV cords from the back of your TV that run from the DVD player and insert them in the adapter to their respective colors on the adapter. Then you need to purchase a double female AV adapter that looks like this .http://www.google.com/products/catalog?q=double+female+av+adaptor&hl=en&prmd=ivns&biw=1600&bih=799&bav=on.2,or.&um=1&ie=UTF-8&cid=14119505288159192113&sa=X&ei=S-V1TZPDJIKglAexv-ybCA&ved=0CI0BEPMCMAU# Then you need to put that adapter on the one you just installed so you can add the new AV cord onto it and run the new cord to the TV.That completes the sound of the DVD's back to your TV. Now for your headphones. You will need a double female 3.5mm jack input to put between your headphones and the remaining jack on the adapter. It looks like this http://www.buy.com/prod/3-5mm-female-to-female-stereo-audio-cable-coupler/q/sellerid/23962916/loc/101/216778563.html Play a movie and enjoy. This is the only way to do what you want with the current setup you have. These adapters and wires can all be purchased for less than $10 off of E-bay. If your not using AV cords then the only other way to do it with the current setup you have is --
You can purchase a reasonably priced receiver and hook your DVD, cable, and TV to it as well as your headphones. With no outputs on your TV there will be no way to hear your DVD's through your headphones. You can also purchase a very reasonably priced shelf speaker stereo. Many made in recent years have some audio inputs and of course inputs for your headphones.

Mar 08, 2011 | Sennheiser RS 110 Consumer Headphones

1 Answer

How do you connect these headphones and to what?


They are only for use with all Audiovox Video products which have built in IR transmitters.

Jan 27, 2011 | Audiovox IRHSCS Consumer Headphones

1 Answer

Wireless infrared stereo headphone no sound


You do not need to tune anything. Both transmitter (in your DVD player) and headphone operate at the same frequency.

The only thing I could think of is to check your DVD player's menu to make sure the transmitter is activated. And make sure you maintain line of sight between headphone and transmitter.

But rather then me guessing since you did not provide the model numbers of your products, why don't you contact XO Vision's customer service as listed on their website: http://www.xovision.com/contactus.php

Good luck.

Nov 08, 2009 | Headphones

1 Answer

Audiovox Infrared Headphones


My set has an led that glows red when on...if batteries in correctly, and switch on...do you have a red "POWER" indicator. If yes, & still no sound, 1-does the other set work? 2- either side of prob set work? 3-VOLUME up all the way? Could be bad receiver/bad speaker(s) bad vol switch.
IF no POWER led on, then 1-bad batteries 2-bad power switch 3-broken internal power lead/wire.
Kids are rough on these things...any sign was dropped, or dunked in a coke? REMOVE ear cushions are screws if yur inclined.... sk

Apr 08, 2008 | Audiovox (JHHO-110) Headphones

Not finding what you are looking for?
Audiovox (JHHO-110) Headphones Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Headphones Experts

Cindy Wells

Level 3 Expert

4753 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

L Pfaff
L Pfaff

Level 3 Expert

11573 Answers

Are you an Audiovox Headphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...