Question about Canon CanoScan N650U Flatbed Scanner

1 Answer

I have recently installed Windows 7 operating system and can not find a driver that is compatible with my old Canoscan N650U. Can you assist?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

This will fix your problem, just be sure to follow the steps below.

Download the Windows XP Drivers HERE

  1. Install the drivers
  2. The driver didn't install, but unzipped to C:/Temp/CanoScanCSUv571a
  3. Go to C:/Temp/CanoScanCSUv571a and uncompress CanoScanCSUv571a.exe
  4. Plug in your scanner
  5. Type Device Manager into your search bar ( on the start menu )
  6. Run Device Manager
  7. Click on Add a Device and select the scanner
  8. Right click on the scanner to update driver information
  9. Select browse my computer for driver software
  10. Type in: C:\Temp\CanoScanCSUv571a
  11. Click next and it will install the drivers for the scanner
This worked for me at work, hope it works for you
Pleas Rate.

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canoscan N650u driver


I have Windows 7 32bit running with the driver from canon XP Driver - CanoScanCSUv571a.exe.
1. Download driver from Canon
2. Extract driver to CanoScanCSUv571a folder
3. Click Start orb and Control panel
4. Make sure classic view if checked
5. Double click Device Manager
6. Under imaging devices right click CanoScan N650U/N656U and select update driver software...
7. Select Browse my computer for driver software and click browse button to location of the CanoScanCSUv571a folder and click on Next button.
8. Ignore any warnings the driver works fine. Have been using it for a long time now

This will only work with Windows 7 - 32bit OS. I personally reinstalled windows 7 - 32 bit. Had too many problems with the 64bit OS and all by Older software. Could not afford to buy all new hardware and software for use on a 64bit system.

Jan 10, 2014 | Canon CanoScan N650U Flatbed Scanner

1 Answer

Scanner wont operate on windows 7. used to work on xp. says no driver found


Click here
Click on above link select os and download driver and install.
Let me know if you need further assistance.
Thanks for using FixYa.

Aug 10, 2011 | Canon CanoScan N650U Flatbed Scanner

2 Answers

I have a canon n122ou n65ou n656u flatbed scanner and i have a new laptop gateway windows 7 and it said could not detect device, it did not download what is wrong?


Looks as if that scanner is not compatible with windows 7. Best thing to do to verify it, go to this site:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&modelid=6858

Even though your running windows 7, choose vista as your OS.

Then download the software and see if it will install. If it installs then your good to go. I've had other hardware that wouldn't work with windows 7 but yet i go to install the vista drivers and i've gotten stuff to work. Give it a try so you know for sure.

May 27, 2010 | Canon CanoScan N650U Flatbed Scanner

2 Answers

Need drivers


there is no driver yet for windows 7.but download scan gear and scan gear toolbox from here:http://software.canon-europe.com/products/0000473.asp  open properties,compatibility and run it in compatibility mode for xp sp2

Feb 28, 2010 | Canon CanoScan N650U Flatbed Scanner

2 Answers

Install canoscan n650U with windows 7


sorry, none of the solutions listed above worked for Windows 7 on the N650U. will have to keep scanner on a stand alone computer with old Windows

Jan 19, 2010 | Canon CanoScan N650U Flatbed Scanner

1 Answer

I want to use CanoScan N650U with my Vista oerating system


This will work:
1) Download the drivers for XP from Canon's website
2) Install the drivers.
3) They will install to C:/Temp/CanoScanCSUv571a, go there
4) There is a compressed file called: CanoScanCSUv571a.exe in the foler
5) Use 7-zip to uncompress the folder
6) Plug in your scanner
7) Go to your device manager under the Control Panel
8) Go to Imaging Devices and select your scanner
9) Right click to update driver information
10) Select browse my computer for driver software
11) Type in: C:\Temp\CanoScanCSUv571a
12) Click next and your scanner will work.

May 15, 2009 | Canon CanoScan N650U Flatbed Scanner

2 Answers

Twain driver


Where can I get a twain driver for Canonscan N650U to work with my windows XP

Jan 06, 2009 | Canon CanoScan N650U Flatbed Scanner

Not finding what you are looking for?
Canon CanoScan N650U Flatbed Scanner Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...