Question about Kenwood Car Audio & Video

1 Answer

I have a kenwood kdc-w7544u cd player and a mutant mtpk 300-a amplifier and i,m trying to connect it together in my vauvhall zafira. i have connected all the leads except one, the blue remote lead as there is no clear connection. can you help please

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

The blue remote lead is the one that turns the amp on and off with the stereo. Without any power going to this the amp will not turn on. You have to either connect it to the remote lead coming out from the back of your CD player (should be a blue wire as well), or connect it to another power source that turns on and off when the car does (such as an ignition wire). Connecting it to the blue lead from the back of the radio is the preferable and much easier way to do it. Without connecting this remote turn on you will not be able to use the amplifier.

Posted on Mar 19, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio has sound, but cd does not. the cd player works but no audio. why?


do you have a amplifier in the vehicle? if so you may have the power antenna wire (blue) connected instead of the blue/white.

Feb 18, 2011 | Kenwood KDC-MP3035 CD Player

1 Answer

Display screen not working


Sounds like you might have a bad connection where the faceplate connects to the unit, or the faceplate is bad.

May 21, 2010 | Kenwood KDC-X590 CD Player

1 Answer

Install


I hav a problen with ic amplifier of audio KKZ12 I need to remplaice or need more information with this

Nov 23, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

2 Answers

Connecting to the AUX input. Hard and software


you are connecting a cd PLAYER to an AMPLIFIER of some sort?
The rear connecters are audio/video out (red/white audio L/R and yellow is video) i assume rca connectors (phono)
The sound should be on for those connectors all the time, so no need to switch to audio out.
You connect to Aux in on the amp. and select Aux on that (amp meaning amplifier or stereo unit with aux in)
I hope this helps.

May 09, 2009 | Kenwood KDC-W5534U CD Player

1 Answer

Connect my mp3 player to mt kenwood z919 car stereo


buy an adapter that connects in to the cd changer connetor this output is in the back of your cd player(get it at Best Buy)

Oct 15, 2008 | Kenwood KDC-MP228 CD Player

1 Answer

Kenwood kdc 3011 cd player


Have you tried the balance and fader control?
Also make sure the ground or - negative wire has a good connection for that speaker from the back of the unit. Or it could be the internal amplifier it self.
Dan

Aug 17, 2008 | Kenwood KDC-2011S CD Player

1 Answer

Kenwood KDC-X590 CD Player


what do you mean by one set is a hard wire and other is an rca jack?the hard wires go to the speakers and the rca is wired to an amplifier of some sort which is wired off to more speakers or subwoofer(s)

Aug 12, 2008 | Kenwood KDC-X590 CD Player

1 Answer

Kenwood kdc-mp232 not turning on


check your connections. i believe only the standby wire is connected.. or the built in amplifier detects a short on the speaker wires.

Jul 18, 2008 | Kenwood KDC-MP232 CD Player

1 Answer

Wiring mishap with kenwood cd player


Hi,

For wiring your Kenwood KDC-MP4028, please refer to the below wiring/color guide:
Red - Ignition/Accessory B+12VDC
Black - chassis/GND
Blue/White - external amplifier
Blue - motorized antenna
Brown - mobile phone mute sensor
White - Front Left +
White/Black - Front Left -
Gray - Front Right +
Gray/Black - Front Right -
Green - Rear Left +
Green/Black - Rear Left -
Purple - Rear Right +
Purple/Black - Rear Right -

Hope this be of help. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Feb 05, 2008 | Kenwood KDC-MP4028 CD Player

1 Answer

Stereo will not operate correctly


did you try running a ground wire from the case of the deck to the battery,just for testing?

Feb 04, 2008 | Kenwood KDC-MP435U CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...