Question about JVC Audio & Video Receivers

1 Answer

I have a JVC XL-MV303BK 3 disc video CD player that I need a part for and can't find the part number. It is a L shaped circuit board behind the front panel that controls the disc changer. It has a large number stamped on it (ENN 498-2) but JVC is telling me that it isn't a active part number. Mine is cracked from the machine being dropped!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I put a cd in my jvc cd player it reads no disc - the radio on the player works


This is usually cased because the unit is sensing that your spindle motor is not turning or turning at a slower speed then normal. "The spindle motor is the motor that spins the disc. This is the most common problem found in DVD and CD players.

Aug 24, 2011 | Audio & Video Receivers

1 Answer

I just bougth a marantz cdr 300 cd recorder,everything seems to be working fine, but I'm not able to listen what I just recordered on any other cd player.Marantz cd 72 mr 2020.Thanks


Hi,
It sounds like you haven't followed the last step to the burning procedure. All you need to do once you've completed burning your disc is to Finalize the disc. Read below why you need to finalize as well as the steps to follow in order to finalize the disc.
Hope this helps ;)
How to Finalize Finalizing is writing the TOC (table of contents) on a disc so a CD player can recognize the number of tracks, the total time for each track, and their location on the disc. A recorded disc must be finalized to playback on a standard CD player. Once finalized a CD-R disc can be played on CD players that support CD-R playback. CD-RW discs can only be played on CD players that support CD-RW playback. Consult your CD player owner's manual to confirm supported formats. Finalizing is necessary to: • be able to play a recorded CD-R or CD-RW disc on a CD player • prevent further recording on a disc • avoid erasing tracks on a CD-RW disc • record text information onto a disc you record Notes: • A finalized CD-R disc can never be recorded onto again. • A finalized CD-RW disc can be unfinalized for more recording. • The CDR300 can play back unfinalized CD-R or CD-RW discs. • SYNC REC+FINAL mode automatically finalizes.
Here are the steps in order to Finalize your disk
1 Push Stop. The display shows the number of tracks and their total playing time. 2 Push FINALIZE. FINALIZE is displayed for about 3 seconds.

Jul 27, 2011 | Audio & Video Receivers

1 Answer

Hi I have a jvc xl m500 6 disc cd changer and the tray won't open help.


I had the same problem. Out of the blue, neither the single tray nor the cassette would eject. On top of that, it wouldn't change discs or even play the disc in the engaged tray. I then unplugged the unit, moved it to my work table, plugged it back it, and it worked fine.
Last year I had a similar problem with the JVC receiver RX750V that I had bought along with the CD player, probably around 1986--it simply would not turn on. I took it out of the cabinet, and shipped it to a JVC repair shop called BC Electronics, Levittown, PA 215 547-7600. They were very knowledgeable and courteous, but said they could find nothing wrong with the unit, and that the unit worked fine. They shipped it back, and the unit worked fine initially. I found that the problem recurred, i.e. that every so often I'd turn the machine on via the on-off switch, and nothing would happen. If I then unplugged the unit, left it off for a while, and plugged it back in, it would work fine. I then installed an in-line on-off switch on the receiver cord. It now seems to work fine consistently.
It seems that after twenty years, this same problem may affect this generation of JVC components, i.e. that the main power source to the unit must occasionally be cut off.
On the other hand I could be completely wrong and just plain lucky...Hope that helps.

Oct 01, 2010 | Audio & Video Receivers

1 Answer

The 200 disc cd changer, model JVC XL-MC334, gets the cds stuck when trying to spin the carosuel around.


this is most difficult cause if you are a technician you got to change or clean the optic sensors and put on time the mechanism changer......

Nov 17, 2008 | JVC Audio & Video Receivers

2 Answers

How to unlock the disc tray on my JVC compact component system MX-KB30


If your CD player dose not respond to normal commands, there is a problem with mechanism. Have serviced

May 10, 2008 | Audio & Video Receivers

1 Answer

Pioneer PD-206 wont power up


Hi tfulton


Try disconnecting from the power and powering it up again to reset the unit.

If it still wont cooperate, the unit will have popped a IC protector in the power supply. Not an uncommon fault. The burnt disc you used may have pushed the tracking servos a little hard and a circuit protector has kicked it. Pop the lid off and look for a black 2 wire device about 4mm across that viewed from above has a D shape. Measure it with an ohm meter....It should read low ohms, if it does not... it has failed. It may be marked as ICPxx(from memory)

A fast fix we used for this is to grab the device and give it a 200 deg twist to short the legs together. Soemtimes(often) the body of the device will break off, just solder the legs left behind.

They have a habit of failingl with no reason, and shorting across them will not affect the operation of the unit, nor put it anything in jeopardy.

OR pull the board out... and replace the device, although I can tell you through experience, they may fail again.

Good luck, if you have any questions, just get back to
me here. :)



regards
Graeme

Mar 08, 2008 | Audio & Video Receivers

1 Answer

Jvc kd-g502, cd player skips constantly. has been cleaned could the cache need cleaning and how?? Carol


Common skipping issues can be:

Scratched discs, recorded cd-r's on poor/cheap media, dirty laser lens, disc spin motor binding, laser asm. slide rails needing re-lubed. Of course defective components can cause it as well.

Geno

Mar 05, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...