Question about Stoves Si500TC Gas Kitchen Range

Open Question

I have a Stoves Newhome SI500TC. When I turn the oven on, the flame works but when I let go of the nob it goes out, what is the problem?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Richie_asg1
  • 1036 Answers

SOURCE: Stoves Newhome SI550DOm gas cooker

Hi,
This is a common safety feature, and is based upon the main gas valve inside the appliance. It regulates only a tiny ammount of gas through when closed - enough to light a pilot. This should then heat a component high enough to trigger the main gas valve and light the main burner.

With the door fully open. Turn on the oven and watch the pilot ignite FROM THE OUTSIDE. Look to see that it is heating what looks like a small wire in the flame. If it is not. Turn it off and let it cool.

You need to adjust this into the path of the flame just by bending it a little. Then try again.
If you cannot, or adjustment doesn't work,then you really need a replacement main gas valve - which is a registered appliance specialist job I'm afraid. Don't take chances with gas appliances.

Thank you for using Fixya.

Posted on Dec 26, 2008

Ad
  • 42 Answers

SOURCE: Newhome stoves 600 SIDO oven ignites but flame stays low

your problem is the fsd ,iam a x gas service eng.

Posted on Sep 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

H I have a stoves newhome 600si the rings,lite but when the grill or oven is on the flames nearly go out as if its lost full pressurean ideas please


I would have your regulator checked going to your stove to make sure you have enough flow rate or a obstruction

Jan 04, 2015 | Stoves Ovens

1 Answer

Stoves newhome gg700 grill flame goes out if lid is closed


I had a stove in my camper that did this. The answer was to let the flame burn for a few minutes BEFORE closing the door. I think the original problem is that there is too much gas flowing to the burner and it literally blows itself out, until you get everything heated up and working. The question, I think, is there a way to turn down the gas pressure??

Nov 19, 2013 | Stoves Newhome ECH600MXa Electric Kitchen...

1 Answer

I have a stoves newhome GL616 cooker that just


Hi I have a gl616 cooker when turned on and flame on gas mark 9 the flame dies down then it turns off, any reason why this happens have replaced the fan,problem still occurs.

Jul 06, 2011 | Stoves Newhome ECH600MXa Electric Kitchen...

1 Answer

Oven lights but wan't get hot the flame just flickers


Hi,


Your problem could be or probably is with the regulator...not enough gas pressure...

Propane, LP, or Natural Gas Regulator Problems


heatman101

Dec 27, 2010 | Stoves Newhome ECH600MXa Electric Kitchen...

1 Answer

I need a user manual for my Stoves Newhome GG600 Gas cooker


I have a newhome GG600 oven, burner will not open up to full capacity, staying on low flame. It does not get hot enough to do any cooking, please advice many thanks.

Jul 11, 2010 | Ovens

1 Answer

Stoves Newhome SI550DOm gas cooker


Hi,
This is a common safety feature, and is based upon the main gas valve inside the appliance. It regulates only a tiny ammount of gas through when closed - enough to light a pilot. This should then heat a component high enough to trigger the main gas valve and light the main burner.

With the door fully open. Turn on the oven and watch the pilot ignite FROM THE OUTSIDE. Look to see that it is heating what looks like a small wire in the flame. If it is not. Turn it off and let it cool.

You need to adjust this into the path of the flame just by bending it a little. Then try again.
If you cannot, or adjustment doesn't work,then you really need a replacement main gas valve - which is a registered appliance specialist job I'm afraid. Don't take chances with gas appliances.

Thank you for using Fixya.

Dec 26, 2008 | Stoves Newhome ECH600MXa Electric Kitchen...

Not finding what you are looking for?
Stoves Si500TC Gas Kitchen Range Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stoves Kitchen Ranges Experts

Paul Carew

Level 3 Expert

2550 Answers

Ismael Rodriguez...

Level 2 Expert

166 Answers

wayne murphy

Level 2 Expert

32 Answers

Are you a Stoves Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...