Question about Washing Machines

1 Answer

Hi we have a Hotpoint Aqualtis AQXXD169PM washuing machine that is approx 3 years old. It has worked fin until a day or so ago when taking out the washing it was still soaking wet. After investigation it appears that the machine will only spin very slowly. We have checked the filter at the front and it is clear. There are no warning or faults coming up on the 'screen' of the washing machine. We have done several 'dummy' washes and it will not spin very fast at all

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Washing Mach... Master
  • 1,456 Answers

Assuming that the pump is okay and water is draining properly,Could be the speed control module or motor brushes,normally they last around 5 years and wear out simple to fit , you could remove one from the motor to check that is not worn right down to Zilch,if these are okay then you may need an engineer,as this is quite an expensive part to fit,you could phone hotpoint they charge around 100GBP,to repair......Parts are supplied free of charge with a call out hence the £100...hope you get on ok...

Posted on Mar 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

?I canot use my washmashine because it doesnt strart ,only are flashes of the lights and nothing else


This model of Aqualtis machine is about 8 years old, I am surprised its lasted as lon, I would suggest the main board has gone, you could try picking one up on EBay for about £35, but i wouldn't waste any more money than that.

Nov 06, 2014 | Hotpoint Aqualtis AQXXL129PM Washer Front...

1 Answer

Hotpoint Aqualtis AQXXD169PM


Could it be that some liquid or cleaning fluid has got into the plastic membrane, if it has one, behind the switches? I had a microwave that did this once.

Dec 26, 2013 | Washing Machines

1 Answer

Hotpoint Aqualtis 2 months old dial turns without changing the display


machine is under warranty, contact Hotpoint for a service call.

Oct 15, 2012 | Hotpoint Washing Machines

1 Answer

Excessively noisy when it spins. The faster the spin the noisier it gets.


Sounds like the Drum Bearings are gone they are **** on Hotpoint..Could be quite expensive depending on age...3 years old you will need a half drum complete with Bearings approx cost £80 plus labour....if more than 4 yrs old then perhaps bearing kit plus 3 hrs labour....Hotpoint give a FREE 5 yrs parts warranty however CALL CHARGE....£105 approx parts are free.....You need to ecide if you should fix or just buy a new one........

Jan 14, 2011 | Hotpoint WMA58 Front Load Washer

1 Answer

WE HAVE A JET 3 ULTRA THAT WE HAD FOR MY MOTHER IN LAW. IT IS ABOUT 2 - 3 YEARS OLD, I DO NOT HAVE THE MODEL NUMBER WITH ME. IT WAS ONLY USED A HANDFUL OF TIMES INDOORS ABOUT 2 YEARS AGO AND SHE PASSED...


Hi. As for a warranty, most battery suppliers give a 6 month warranty or a 1-year warranty. The machine will take 35 amp/hour batteries. Make a few phone calls around your area, and go for the best price and best warranty.
Good luck. Neil.

Jul 05, 2010 | Jet 3 Ultra Power Chair

1 Answer

Zanussi FJS 1425W - the machine is not spinning the clothes so clothes are quite wet when they are washed so have to spin but this is also not working well - washing purchased approx 7 yrs ago -


hotpoint top loading washing machine serial number TS182924N MODEL NUMBER HNXR1060T8WW. machine won't spin and will not empty water, just a humming noise. number on scamatic diagram 175D275OGO71 MACHINE IS APROX 20 YEARS OLD

Jan 06, 2010 | Zanussi Washing Machines

1 Answer

My hotpoint AQXXD169PM frist said the pump was


F11 - No hot fill.The ambient temperature is likely to be below freezing possibly due to the pipes being frozen. Also check that the taps are on or if the drain hoses are kinked.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Jun 28, 2009 | Washing Machines

3 Answers

Trouble shooting the hotpoint aqualtis aqxxf149pi flashing f08


my hotpint aqualtis aqxxf149pi make a funny grinding noise when it spins help please?

Jun 25, 2009 | Hotpoint Washing Machines

2 Answers

On a hotpoint aqualtis aqxx149pm i get error code f8 flashing


Hi.
F8 means that heater relay cannot be activated, you need to call an engineer.
Could be expensive, possibly a new control board needed

Nov 19, 2008 | Hotpoint WMA35 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...