Question about Rti Technologies Rti T1 Remote Control

1 Answer

My RTI T1-B remote suddenly stopped controlling TV functions (volume and channels), but all other component functions (cable, DVD, etc) can still be controlled just fine. Is there a way that I re-program certain TV functions myself or do I need to call a technician out to do this? If there is a way that I can do the re-programming of the TV functions myself, how do I do so?

Posted by on

  • cdavidson861 Mar 19, 2011

    Problem with thisresponse is that I do not have a manual telling me how to reprogram the remote, because the remote was professionally installed as part of a complete home AV system and I was not given a manual to re-program the RTI remote.

  • cdavidson861 Mar 19, 2011

    Thanks. My mailing address is 4342 Town Commons Circle, Atlanta, GA 30319

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Rti Technolo... Master
  • 74,136 Answers

Hello
It will be an internal contact problem. To rectify it you have to open your remote control and clean it well with. there may a seating screw in some type of RTI remotes, can be seen inside its battery compartment. Unscrew it out and just slide out the top and botton cover portion of you remote contro with some sharp instrument, and can be slide it apart. Be carefull without breaking it. there are four inside locks at its side lenghtwise, should be located and press that portion insde to get it apart. Inside you can see an IC with three of four components, Since your remote does works for all other functions except volume and channel, the possibility is there is some trouble in thae track or contact. Clean it well with a cotton cloth dipped in rectified sprit or medical quality turpentine. Rub well to release any dirt or dust on the print side of the pirinted board inside, to which the rubber touch pad comes in contact with. [NEVER use petrol or such hard solvents] as thay harm the rubber parts and plastic parts. Reset the remote control, and reprogramme it according to its manual as you did before. Till it finds to be non functional, with respect to voluem and channel selection, it may be ither Ic trouble or track trouble. Both are irrepairable in case of any remote controls. OK.

Posted on Mar 19, 2011

  • 2 more comments 
  • The Knight
    The Knight Mar 19, 2011

    Hello
    I've no programming method to prgramme RTI at preset. Let me try to get it. Just remind me after 4 hours. OK

  • The Knight
    The Knight Mar 19, 2011

    Hello
    It has to be programmed with USB support. Just contact www.rticorp.com or call 952-253-3100.

  • The Knight
    The Knight Mar 19, 2011

    I've got some more details about it, which I can't send it to you by this site, as I tried but it does not allows me to do so. If you send me your mail address to me by Fixya, i'll send it to you by return mail. Ok.

  • The Knight
    The Knight Mar 19, 2011

    Hello
    This address seems to be your postal address. I asked you your email address. it should be at the form 'someone@mail.com. Please send me this type of email address to which I can send an email to you. or mail me OK.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes a blinking red x on RTI TV remote?


it could be a button stuck in key pad clean pad some times drinks spill and stick.

May 06, 2015 | Rti Technologies Rti T1 Remote Control

1 Answer

How to set up my memorex DVD remote to control my magnavox TV?


Sorry to be the bearer of bad news, but according to the manual in the link you posted, and from Google image searching to look closely at the remote, it doesn't appear to be a universal. The only way you can control your TV with it would be via the DVD player hooked into the TV, and then you will still only be able to control the standard functions of the DVD player (i.e. pause/play, stop, FF/Rew, menus, subtitles, etc.) but not the functions of the TV (i.e. volume, channel, power, etc.). Assuming you get yourself a new, actual universal remote to replace this with, I recommend this site in the future: http://www.remotecodelist.com/

Sep 11, 2012 | Memorex Televison & Video

1 Answer

I played a dvd and now can't get the tv to come on. How do you switch between dvd and television? This is a Westinghouse DVD LCD combo television.


on the remote there are various button at the top to control the functions. these include tv dvd cable etc.
When the remote is set on tv all the functions on the tv work together with the functions of dvd such as play stop etc.all except power channel up channel down etc.
THE REMOTE MAY JUST BE SET TO DVD JUST PRESS TV AT THE TOP OF THE REMOTE OR YOU MAY NEED TO SET IT BACK AND THE PROBLEM IS FIXED!!! THE USER MANUAL SHOWS YOU HOW TO SET IT.

Feb 27, 2010 | Televison & Video

2 Answers

My 1 year old RTI T2+ suddenly will not charge. I've tried charging it on 2 separate charging stations with no luck!


Try replacing the battery. If this does not fix the problem the charging circuit may be bad and need service. Go through your dealer if you purchased it that way and they may be able to provide you with a loaner while it's sent off to service. Or call RTI yourself and setup a service request. (952) 253-3136

Feb 06, 2010 | Rti Technologies Rti T1 Remote Control

1 Answer

New RTI remote went black. Fully charged but nonresponsive.


Whenever possible contact an authorized RTI dealer in your area for support help!

There are a couple of reasons that a T1 or T2+ goes black. I understand that the screen does not light but if the buttons do not light either. The first most obvious reason is the battery is dead, even though it may act like it is charging. Pop the back off and check to see if the battery is slightly bulged. If so, it is for sure finished with its life. Further if the battery is over 2 - 3 years old it is probably done. Replacement batteries are available, but changing them requires more knowledge than just knowing how to use a Philips screw driver. The mother board battery connector is very susceptible to damage, so you must take great caution to hold the white mother board connector down gently on the edge with a small screw driver while you pull the white battery connector out.

Another potential problem area that will cause the screen to go off or become fractal is that there is an internal screw in the lower left that clamps the keyboard circuit board in place. This is also the ground clamp for the keypad illuminating surface. If this screw was not installed tightly the contact surface underneath will burn off. I have successfully repaired several of these by placing a triple folded small piece of aluminum foil in place of the burned out contact material under the screw and clear plastic illuminating sheet then tighten up the screw.

Only perform repairs if you are qualified to do so J

David
Master A/V Systems Integrator
www.soundandtheater.com/home.htm

Sep 27, 2009 | Rti Technologies Rti T1 Remote Control

2 Answers

Rti remote doesn't work properly


The best advice I can give you is to contact Total Control Remotes (www.totalcontrolremotes.com) or info@totalcontrolremotes.com. They are an authorized RTI dealer and specialize in programming RTI remotes and all related equipment. Not only is the customer service excellent, but the pricing is great. They will get you back on your feet in no time. You should not let a control system of this type go wasted.

Jul 31, 2009 | Rti Technologies Rti T1 Remote Control

Not finding what you are looking for?
Rti Technologies Rti T1 Remote Control Logo

Related Topics:

1,319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rti Technologies Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Rti Technologies Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...