Question about Maytag Dishwashers

1 Answer

I just bought a new house with the maytag quiet series 100. How do i activate the settings "lock?"

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Press and hold the HEAT CYCLE button for 3 seconds.

Posted on May 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spray in control panel=lost power to Maytag Quiet Series 100


Have you checked the breaker to the unit? if not make sure you are getting power from the breaker to the dishwasher, if you are then check the wiring where it goes into the dishwasher to make sure you have 110 volts to the unit. if this does not fix it, i think it will leave me a msg and i will tell you more things to check, im not sure but there also may be a reset button on this unit

Feb 18, 2010 | Dishwashers

3 Answers

1.5 year old Maytag Legacy Series Quiet Series 300 Lock Light on


Hold down the heated-dry button for 3 seconds and the light will clear.

Nov 07, 2009 | Maytag 24 in. MDB9750AW Dishwasher

1 Answer

I have a maytag quiet series 100 dishwasher and it will not run a lock light comes on and i have replace a broken handle assembly but light stays on


the control panel is locked. dont know your model number to tell you what buttons you hold to unlock it, but some models have a lock button you hold down for 3-5 seconds. other models just have a lock light, and have a line indicating 2 buttons that you hold down for 3-5 seconds. if you cant find which buttons to hold down, refer to your owners manual. once the control panel is unlocked, it will run again. shane

Sep 01, 2009 | Dishwashers

3 Answers

The handle on my Maytag Quiet series 100


I had the same problem with my QS 100. I disconnected power first via the breaker then removed the 11 screws. I couldn't loosen the two electrical connections, but the door pulled far enough away to inspect the handle mechanism. The plastic handle fell out of whole handle assembly rather easily because two molded plastic pins protuding from either side had broken off and were loose inside. There was also a pair of molded plastic v-shaped forks right on the panel to hold the handle assembly and these were damaged but they just to seem to act as guides only (as the handle assembly is held in by two of the screws that were removed). Replacing the v-shaped forks would require a whole new door which I am NOT doing. It looks like I can a replacement handle in the same color with new pins (I am reading they may now be metal) for about ##15. Pretty easy to disassemble and inspect, only about 15 minutes.

May 29, 2009 | Maytag 24 in. MDB5600A Jetclean II...

2 Answers

My Maytag dishwasher Quiet series 100 gets no water


I would cheak your float switch witch is located on the bottom of inner dishwasher move it up and down may be stuck.then try.If that will not work you may have a bad micro door switch.Good luck:)

Apr 08, 2009 | Maytag MDB5100A Dishwasher

2 Answers

Maytag Quiet Series 300 Dishwasher will not turn off after it com


MY DISHWASHER KEEPS RUNNING, IT IS A WHIRLPOOL GOLD QUIET PARTNER IV

Apr 05, 2009 | Dishwashers

2 Answers

I have a new Maytag dishwasher with no User Instructions for using. There are different selections etc. It's a Maytag Quiet Series 300. Can I get the users manuel on line?


Here's a link to dowload the PDF file of your manual: http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=MDB8600AWW&siteCd=MT_EN_US. Good luck!

Jul 18, 2008 | Dishwashers

1 Answer

Water does not drain completely, mostly but not completely and just stays there Maytag Quiet Series 100


If the machine has a auto sensor or auto clean cycle it is supposed to keep water in the bottom. The sensor has to stay wet for it to work properly. My Maytag drains, then fills slightly to do this.

Jul 03, 2008 | Maytag Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...