Question about Fisher and Paykel Washing Machines

1 Answer

Lights 2 & 7 are on and it is continuously beeping. can't get it to progress to the next level. what do i need to do to reset it.

Posted by on

  • michellelew4 Mar 19, 2011

    Hi Daniel thanks for this. The power was off over night so i presume it is going to need the motor controller board replaced. Will this be expensive.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,323 Answers

When lights 2 and 7 blinks continuously it means Pressure Transducer Out of Range Error. This error appears when the Motor Controller has received signals from the Pressure Transducer outside normal values. To resolve this error try and remove the power to the washer for 1-2 hours and check. If 2 & 7 lights are still blinking then you would need to get the motor controller board replaced, as it contains the circuitry of pressure transducer. Hope this helps... Please post back if you need more information.

Posted on Mar 19, 2011

  • Daniel Scott
    Daniel Scott Mar 19, 2011


    A new motor controller board will cost you around $130. You can get motor controller board from this link--

    Hope this helps... Please post back with model# if you need more information.




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to know how to set my inspiron m731r back to factory default

Hi there,

To do a full factory restore wiping everything ..
Turn on the computer, after the Dell logo press F8 key repeatedly until the
Advanced Boot Options menu (Advanced Startup Options).
In Advanced Boot Options, highlight Repair Your Computer and press Enter.
Click Next and logon to the administrator account in the computer.
Click Dell DataSafe Restore and Emergency Backup and DataSafe Options.
Choose Restore without preserving new or changed file. Click Next to continue.
Choose Yes and click Next to continue.
Progress status will appear. Click Restart to initiate the restoration process.

The link I attached may give you some further help.

Good luck & have a great day! :)

Can you reset DELL Inspirion to factory settings on windows 7 with the...

Jul 14, 2017 | Computers & Internet


How to Reset Windows 7 password when you lost it?

Sometimes we do not know your Windows password. Of course, If you have forgotten your windows passwords, there is an efficient solution to get it back. Follow These steps to reset Windows 7 passwords.<br />No need to bother if you have had a repaired disk created before. With the reset disk, you can use <a href="" style="font-weight: bold;">Windows 7 Password Recovery</a>.. This article tells you how to create reset disk and how to use Windows 7 password recovery administrator with three methods.<br /><br />The first method:<br />1. Click on "Start" and then Control Panel in Windows 7. <br />2. Click on the User Accounts and Family Safety link. <br />3.Click on the User Accounts link. Importantly, before you proceed, make sure have some kind of portable media to create a password reset disk on. It means that you will need a flash drive or a blank floppy disk, otherwise you will not be able to create a windows 7 administrator password reset disk on a CD, DVD, or external hard drive. <br />4. In the task pane on the left, click the Create a password reset disk link. When the Forgotten Password Wizard window appears, click "Next".. <br />5. In "I want to create a password key disk in the following drive: drop down box", choose the portable media drive to create a Windows 7 password reset disk on. Click "Next" to continue. <br />6. With the disk or other media still in the drive, enter your current account password in the text box and click Next. <br />7. Windows 7 now will create a password reset disk on your chosen media. When the progress indicator shows 100% complete, click "Next" and then click "Finish" in the next window. Then remove the flash drive or floppy disk from your computer.<br /><br />The second method:<br /><span style="font-weight: bold;">You have a reset disk. Then you can follow the steps to windows 7 password recovery with it.</span><br />1. In the Windows 7 log on window, click "Reset Password". <br />2. Insert your password reset disk and then click on "Reset password" option to open Password Reset Wizard. Click next button to continue. <br />3. Select the password reset disk from the drop down box. Click "Next" to proceed to the next step. <br />4. Enter a new password and then type password again to confirm. <br />5. Click the next button and then click "Finish" button to close the wizard. <br />6. Now enter a new password for your user account.<br /><br />The third method:<br /><span style="font-weight: bold;">Use windows password reset tool to reset your windows password</span><br />If you are not a computer technician, or not familiar with computer system operations, you may feel the above methods are scary and still can't figure out what I am saying. Then you may try to use the software programs which may suit you. I've found that <a href="" style="font-weight: bold;">Windows Password Recovery</a> is the most effective. The program can easily reset the password to "Blank" without reformatting or reinstalling your system.<br /><br />

on Nov 30, 2010 | Computers & Internet

1 Answer

Machine stuck in drain mode, beeps, can only turn off at powerpoint.

Your motor controller board is faulty
needs repair or new/recondition board.

May 06, 2013 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

MW511. 2 & 7 lights flash, beeping. No agitate or spin?

Fault code 66 is pressure sensor is faulty
66. (01000001) Pressure Transducer Error [Ptx Frequency > 90 kHz]
Note: this supersedes Fault code 65 from V41 Motor controller code onwards.
The Motor Control module has received signals from the water level sensor (Ptx)
above normal frequency values.
Primary Source: Motor Control module
Action: Replace Motor Control module

Apr 20, 2012 | Fisher and Paykel Washing Machines

1 Answer

I have a 2006 Chevy Trailblazer, the problem I am having is the brake sensor light will not go off and it keeps beeping. I was low on brake fluid and put some in however the light and beeping will not...

{: ) The brake fluid sensor is very important because it will tell you through the warning indicator if the fluid level is critical, specially while you are driving on road. You can try a few steps just to rule out some possibilities. Better if engine is off, but keep ignition on while proceeding with tests. Transmission in Park position,and the parking brake DISENGAGED fully.

Sometimes its not enough to put some, better complete fill to max level. Check again the sensor light..
If same problem, try to remove the brake fluid sensor connector. Check again.
If the connector has two wires, use a thin jumper wire to connect the two ends. Check again.

If Yes progress, then you need to replace the brake fluid sensor.
If still No progress, return the connector to its place. It's possible the parking brake switch is shorted, or the wires shorted to grouind. The system may need to be checked thoroughly.

Jun 05, 2011 | 2006 Chevrolet Trailblazer

1 Answer

The green light which goes off at the end of the cycle is continually flashing and there is a continual beep.

You may just need to reset your control board. Go to the link and it will explain how to reset the control board as well as explain what might cause the issue and how to fix it.

Good Luck

Mar 06, 2011 | Whirlpool DU930 Built-in Dishwasher

1 Answer

Washer beeps at the end of each cycle,must be advanced manually

Hi Steve just read your posting.Now when it starts to beep a series of lights will light up.Starting from left to right they are numbered 1st on the left=128 next is=64 next is=32 next is =16 next is= 8 next is = 4 next is = 2 next is = 1. So the lights are numbered from left to right 128--64--32--16-- 8-- 4--2--1. now with this information look at the lights that are lit add up the value of the lit lights and reply back and i will look in my service manual and tell you what part or parts are faulty. hope this helps.

Jun 03, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Gears of war 2 level reset!

wel try signing out and recovering your gamertag again that should set you back on track wit your levels and achievments


Jul 18, 2009 | Microsoft Gears of War 2 for Xbox 360

1 Answer

Self-cleaning error message f90

F90 Maximum oven door unlock time exceeded.
F91 Maximum oven door unlock attempts exceeded.
F92 Maximum oven door open time exceeded.
F93 Maximum oven door lock time exceeded.
F94 Maximum oven door lock attempts exceeded.

1. (F90, 91, 92, 93 & 94) Check the wiring between EOC & Lock Motor Micro Switch.

2. (F90, 91, 92, 93 & 94) Replace the Motor Door Latch assembly if necessary.

3. (F90, 91, 92, 93 & 94) Check for binding of the Latch Cam, Lock Motor Rod & Lock Motor Cam.

4. (F90, 91, 92, 93 & 94) Check to see if Lock Motor Coil is open. If open, replace Lock Motor Assembly.

5. (F90, 91, 92, 93 & 94) Lock Motor continuously runs - if Micro Switch is open, replace Lock Motor Assembly.

6. (F92, 93 & 94) Check oven door Light Switch - if open, replace Switch.

7. If all situations above do not solve problem, replace EOC.

F90 is a door lock code, Try this...
unplug the range.
wait 1 minute.
turn the range back on,
then while holding in on the oven door.
start another self clean.
wait 2 minutes.
then cancel the self clean.

do not release the door until the door lock light goes out.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Dec 30, 2008 | Kenmore 79383 Dual Fuel (Electric and Gas)...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides