Question about Cisco Linksys Wireless N Home Router WRT120N Wireless router (745883589319)
Here's an easy solution to recovering a lost network key/password!
In your web browser (even if you cannot connect) type in exactly: http://192.168.1.1.
This is your router's LAN address and will give you access to a host of control screens
Then click the "Security" tab which will reveal your network key/codes.
Your network user name/password/WEP should be shown in this tab!
Hope this helps!
Posted on Mar 19, 2011
The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, it needs the router'swireless settings configured ie SSID, WPA or WPA2 encryption key and also thewireless cards in all the laptops and or computers needs to be configured withthese router's wireless settings. Then the laptops and desktop computers cancommunicate with your wireless router.
Posted on Mar 19, 2011
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 21, 2013 | Cisco 878 GSHDSL Wireless Router for Small...
Mar 25, 2011 | Linksys ROUTER + CISCO PC CARD Wireless...
Feb 04, 2011 | Linksys Wireless-G WRT54G Router
Jan 02, 2011 | Linksys WRT54G2 Wireless Router
SecureEasySetup (Orange/White) The Cisco logo is the Router's SecureEasySetup button. It
lights up and will stay orange when the Router is powered on. The color orange indicates that
the Router is not using the SecureEasySetup feature, while the color white indicates that the
Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup
mode, the Cisco logo will turn white and start flashing. After the Router has generated
the SSID and WPA Personal key, the Cisco logo will stop flashing and stay white.
To clear the SSID and WPA Personal key, press and hold down the Cisco logo for five seconds.
The Cisco logo will flash slowly as the Router resets itself. The Cisco logo will turn orange to
indicate a successful reset.NOTE: SecureEasySetup is a feature that makes
it easy to set up your wireless network. If you have SecureEasySetup devices, run the Router's
Setup Wizard CD-ROM and follow the onscreen instructions to use SecureEasySetup.
Power (Green) The Power LED lights up and will stay on while the Router is powered
on. When the Router goes through its selfdiagnostic mode during every boot-up, this
LED will flash. When the diagnostic is complete, the LED will be solidly lit.
DMZ (Green) The DMZ LED indicates when the DMZ function is being used. This LED will
remain lit as long as DMZ is enabled. WLAN (Green) The WLAN LED lights up when
the wireless feature is enabled. If the LED is flashing, the Router is actively sending or
receiving data over the network. 1, 2, 3, 4 (Green) These numbered LEDs, corresponding with the numbered ports on the Router's back panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected to a device through that port. A flashing LED indicates network activity over that port.
Internet (Green) The Internet LED lights up when there is a connection made through the
Internet port. A flashing LED indicates network activity over the Internet port.
Nov 26, 2010 | Computers & Internet
Aug 17, 2010 | Linksys Wireless-G WRT54G Router
Jun 18, 2010 | Linksys Computers & Internet
Mar 14, 2010 | Linksys -Cisco Wireless-G VPN Broadband...
Feb 10, 2010 | Linksys Wireless-G WRT54G Router
354 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: