Question about Sharp XR-10SL DLP Projector

1 Answer

Will not coming on ,standby light is orange temp and lamp light not on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sharp Master
  • 6,694 Answers

Hi,
Just try to reset the lamp hour of your projector. For resetting the projector do the following.

While simultaneously holding down MENU/HELP, ENTER and Down arrow button on the projector, Press STANDBY/ON on the projector.
Remember one thing lamp hour reset is recommended only after the lamp replaced. Before going to buy a new lamp just reset the lamp hour and confirm that the projector doesn't have any other problem.

If these doesn't help then check the lamp of you projector chances for lamp became faulty.
ok

Posted on Mar 19, 2011

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

projdoc
  • 2236 Answers

SOURCE: the projector doesn't turn on.power,temp,lamp orange light are on

overheated. clean it out with canned air. try again. if it still has an issue, you may have a main board problem.

Posted on Nov 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba TDP ST20 projector standby problem


(Ah, I didn't see this box before I logged in, and now I can't delete the "comment" that says the same. In any case, copy annnnnd... paste!)

If it's an orange or grey + orange coloured one, with no controls on the body other than the two service buttons, then it's been ripped off from a Smartboard interactive whiteboard system in a school, college, office, etc - either by a thief, or during a genuine but misguided stripdown whilst the system was being junked. It won't function without being connected to the rest of the system. The light sequence you see is normal for it being connected to the mains, giving an "all clear" indication, then settling back into standby. You MIGHT be able to make it work with a suitable remote, but it does sound mostly that you're running into an anti-theft lockout...

It's for the best, they're rather fragile and wear out somewhat quickly. Get hold of an NEC or HP or something instead, they're rather more hardwearing.

May 18, 2012 | Office Equipment & Supplies

2 Answers

My standby/temp light is blinking and my lamp light is blinking. tv is about two years old. Just started happening out of the blue. It will come on for a few minutes. I have three dogs and it gets dusty...


check the lamp if you havent changed it before that would be the easiest place to start. if the lamp is popped you will see glass pieces rolling around in the lamp.

Dec 22, 2010 | Samsung HL72A650 Television

1 Answer

Standby/temp light and Lamp light are flashing


Sounds like a samsung but I will need the model number to assist you more accurately. Please respond to this same post.

Dec 04, 2009 | Televison & Video

1 Answer

What does it mean when that blinking green light turns to orange one in lp 350?


Hi
This would be "Standby"
When you press standby, the display and audio turn off and a blank screen is displayed for 15 minutes.
You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 27 for details.
The LED lights orange while the projector is in standby.
• If you press standby again within 15 minutes, the projector returns to normal operations immediately. The LED changes from orange to green.
• If you press standby again after 15 minutes, there is about a 60 second delay before the lamp turns back on. The LED flashes green while the lamp is re-lighting.
• If you don’t press standby again, the lamp turns off after 15 minutes. The LED lights orange while the projector is in standby.
The full manual can be found here:
Infocus customer support
Infocus LP350 Manual
I hope these help
Mike

Sep 18, 2009 | InFocus LP350 Multimedia Projector

1 Answer

No picture on a Samsung HL-P4663W, trouble lights confusing...


The most common blink code for the Standby/Temp LED is the Temp Sensor and or Actuator Board. You can confirm which on by jumping the CN106 connector on the Actuator board. If the set works now, the Temp Sensor must be replaced. If it doesn't work, the Actuator Board would need to be replaced. If you are not familiar with the chassis or electronics at all , I do not recommend trying to fix it, call a professional. Don't take the chance of damaging it further.
I hope this helps,
Skyassoc

Jun 29, 2009 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Wont come out of standby


The problem is most likely a defective lamp. See your owners manual on lamp replacement as this can be done by the consumer.

Dec 05, 2007 | LG RU-44SZ51D 44" Rear Projection...

1 Answer

Orange light on lamp icon on Optoma EP732H Projector


This same thing happened to me, I removed the bulb and put it back in, it reset something and I was able to use the projector again.

Nov 12, 2007 | Optoma EP732H EZPRO DIGITAL PROJECTOR...

Not finding what you are looking for?
Sharp XR-10SL DLP Projector Logo

1,277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...