Hi i have a digitalaudio dhc 1604//i have had it for a while but was never banged around or droped//i used it for about 3months when it started to sound different and then we noticed that the amp had power coming throw it which means it dident only shock you when you touched it it just simpaly sent a current throw you and then we heared a pop then it quit//i took it apart and theirs little blue risistors that blue can you help me get it fixed//

I am looking to buy the main unit (Dvd player) of FL5D or FL7D -- anyone wants to sell?

Hello, check the battery compartment for corrsion. Clean it up really well. Also, since it has been stored for a couple of years. Has it been miss treaded in handling in storage, bang around, anything like droping while it was in a storage box, etc... I hope this will help you, stewbison

Hi,

Yes, you got it right...

heatman101

If you have done using the 60 days trial of this software you have previously registered the software or have a proof of purchase for the software, contact the manufacturer and they will provide you with a new product key.

FixYa and it's experts do not provide product keys, serial numbers, illegal software, authorization numbers or codes, warez, hacks or cracks under any circumstances. Any expert that does so will be barred from answering questions. Those asking are subject to their membership being deleted and be barred from the site.

Fixya will not provide a serial number, it is violated the rules of piracy.
Piracy is not allowed,

My SONY Model DHC FL7 my problem is when i Start the display show "push protect power" so what is the reason for that situation so what i DO?

data response from the HDD would likely be too slow, so I'd say no.

بدا تبيض الشاشة من افتح السلايد وشوية شوية ابيضت الشاشة على طول بس لسى يستقبل المكالمات مع ابيضاض الشاشة

I need help finding a free printable user guide for my GR-D370U camcorder I bought it used without guide

mr_deff@hotmail.com

It may be a corrupt backup you are trying to install, but if there is a corrupt file you will need to borrow a genuine XP disc off a friend to repair it. You can use your own license number for the copy so your friend shouldnt be concerned with piracy. You may get the pc running by locating on the motherboard either the 3 pin JBAT1 terminal and put jumper from pins 1-2 to pins 2-3 then back to 1-2, or short both pins if you have a 'CLRCMOS', 'CLRRTC' or 'RTC' 2 pin terminals with a jumper cap. Restart pc and it should make you press F1 to set the cmos time and date and hopefully boot into windows, but if not the first paragraph will be the solution to the problem.