Question about AT&T 1726 Digital Answering Machine

1 Answer

We had messages on the first two lines and after we listened to the one line, the machine flashed 88 and we could not retrieve the other messages. We have used this machine for a long time with no problems. I have my own tax business and these messages are important.

Posted by on

  • 1 more comment 
  • jkb1750 Mar 18, 2011

    When I dialed the number it just continues to ring and the machine does not pick up

  • jkb1750 Mar 18, 2011

    When I dialed the phone, it just continues to ring and the machine does not pick up

  • jkb1750 Mar 18, 2011

    I can not get the machine to do anything, not set the time or anything

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, dial your telephone number using a touch tone telephone. When the answering machine picks up and begins to play your outgoing message, enter your remote access code. Your answering machine will announce the number of messages you have and then beep twice.

Wait for the machine to begin to play your messages. It should start after about four seconds. Use the relevant keys to repeat, skip, save or delete a message. You can also repeat a part of a message or back up to previous messages.

Posted on Mar 18, 2011

  • Tunde Autos
    Tunde Autos Mar 18, 2011

    If you have the user manual there with you, try resetting and see if it will solve the problem....

  • Tunde Autos
    Tunde Autos Mar 18, 2011

    Then you need a tech to check it out so as to enable you retrieve your messages....

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light stays on in the base unit and light flashes on handset. No messages--all have been retrieved.


If your charge light is flashing and you have no messages on your answering system, you may have voicemail. Voicemail is provided by your telephone company and they would be able to assist you with retrieving those messages.

May 15, 2015 | Uniden TRU9488 Corded/Cordless Telephone -...

1 Answer

How to listen to messages


The EV2625 isn't an answering machine. To listen to your messages, refer to the documentation for whatever answering machine or voicemail system you have on your phone line.

If you require further assistance, please add a comment to this question and identify the answering machine or voicemail system.

Feb 27, 2014 | Vtech EV2625 Cordless Phone

2 Answers

My message light won't stop flashing I had a message yesterday I listened to it then deleted it but the message light is still flashing and when I check it is saying no new messages


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Jun 14, 2013 | Aastra Telecom Powertouch/Vista 390 Corded...

1 Answer

How do i retrieve my messages from a landline when my time is out


You'll receive a text message stating "You have a reply to your Text to Land line message from XXX-XXX-XX-XX. Press TALK to listen to the reply." There is no charge for this notification.
This text message will contain the appropriate toll-free phone number which you can use to retrieve the voice-mail. To pick up the message, you must make the call from the mobile phone that received the notification. Standard airtime rates apply.

Jul 29, 2009 | Cell Phones

2 Answers

Retrieving messages over phone


when your greeting answers, punch in your code, usually a 4 digit code, each manufacturer has their own default code that it comes with.. check the manual or website

Apr 14, 2009 | Lands Phones

1 Answer

How to access messages remotely


While you are away from your home or
office, you can use a touch-tone phone,
or a pulse (rotary) phone with a pocket
tone dialer (available through your local
RadioShack store) to enter your PIN and
do any of the following:
• set the phone to answer or not
answer calls
• listen to your messages
• record a new outgoing message
• erase messages
• monitor the room where the phone
is located
Notes:
• You cannot remotely operate the
phone using its handset or another
telephone on the same line as the
phone.
• You can also listen to the message
recorded on Line 2 by making a call
to Line 1’s number (or vice versa).
USING THE TOLL-SAVER
If RING TIME is set to TS (toll-saver),
(see “Setting the Number of Rings” on
Page 15), the phone answers after three
rings if you have new messages (ones
you have not listened to). If there are no
new messages, the phone answers after
five rings. This gives you time to hang
up before the phone answers so you
can avoid unnecessary long-distance
charges.
Note: Toll-saver works only on the line
you called. If Line 1 has no new messages,
but Line 2 has one, the telephone
answers after five rings when you
call Line 1.
USING REMOTE
COMMANDS
Follow these steps to operate the phone
from a remote location.
Note: If you wait more than 15 seconds
between keypresses, the phone sounds
a long beep and hangs up.
1. Dial your phone number and wait for
the phone to answer.
2. If the phone is not set to answer
calls, it answers after about 10 rings
and sounds a series of beeps.
3. When the outgoing message begins
(or the phone sounds a series of
beeps), press #, then enter your PIN
within 2 seconds.
If the PIN is correct, the phone announces
the day and time, then it announces
the number of new and old messages.
The phone plays all new messages,
then beeps about every two seconds to
let you know it is ready to accept remote
commands.
Notes:
• If the phone does not respond, try
entering your PIN again. If you enter
an incorrect PIN three times, the
phone beeps and hangs up.
Remote Operation 27
• When the phone is operating from a remote location, it stops all answering functions
and rC appears on the display on the base. The phone resumes answering
functions when it is no longer in remote operation, if you have not turned it off.
• The remote playback of incoming messages is limited to 4 minutes. If you have
more messages after 4 minutes have passed, you must press # 2 again to listen
to the rest of the messages.
• When using remote operation, you can only delete the current message during
playback. You cannot delete all the messages stored at one time.
The following table shows the remote commands you can use.
Note: Remote operation stops when someone picks up the handset and presses either
LINE 1 or LINE 2 (whichever is flashing), or any phone on the same phone line.
Remote Commands
Press #
then (within
2 seconds:
Function
1
Repeat current message during playback.
2 Play messages.
3 Skip current message during playback.
4 Delete current message during playback.
5 Stop playback, recording, and room monitoring.
6 Set the phone to answer or not answer calls.
7 Record or stop recording a new outgoing message.
8 Play the outgoing message.
9 Switch to the other line (Line 1 or Line 2).
0 Monitor the room where the phone is located for 15 seconds

Mar 19, 2009 | Lands Phones

1 Answer

How can I retrieve messages I have erased by accident (grandson's messages)?


unplug NOW before someone tapes a messages over the "deleated"one try plugging back to power after machine has had 5min downtime this may 'reset' so you can retrieve if this does not work call manufactor they may know a trick but do not reconnect because if someone tapes over its gone!

Mar 26, 2008 | Lands Phones

2 Answers

RETRIEVE MESSAGES


To retrieve a message from another location, dial the telephone number and when the greeting message starts punch in your four digit code. The default code is 0123 if you haven't set one. Follow the prompts to listen to messages.

Feb 14, 2008 | GE 29869GE2 Digital Answering Machine

1 Answer

How do you retrieve messages from another phone?


If you have not changed the code, it should be set to the default code 1-2-3. Call the phone with the answering machine, and as soon as your greeting starts press 123. You will then hear a menu. Press 1 to retrieve your messages. After listening to your messages, you can listen to the menu again, which will tell you that you can press 0 to delete your messages, among other choices. Cathy

Jul 15, 2007 | GE 29871GE3 Digital Answering Machine

Not finding what you are looking for?
AT&T 1726 Digital Answering Machine Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Paul C.

Level 1 Expert

59 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...