Question about Sport & Outdoor - Others

1 Answer

I NEED A SOURCE THAT CAN PROVIDE ME WITH A SCHEMATIC FOR AN L.C. SMITH OLYMPIA SINGLE BARREL TRAP SHOTGUN.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sport & Outd... Master
  • 3,740 Answers

This may not be what you were looking for but, here is a list of sources:

Answers to Frequently Asked Questions
by Dr. Drew Hause

Where can I get parts for my L.C. Smith shotgun?
We assembled a short list of sources for L.C. Smith parts, and we are willing to add to the list. Please email js@lcsmith.org with additions to the list.

Numrich Gun Parts Corporation
226 Williams Lane
West Hurley, NY 12491
(866) 686-7424 or (845) 679-2417
Jack First Gunshop
1201 Turbine Dr.
Rapid City, SD 57703
(605) 343-9544

Poppert's Gunsmithing
P.O. Box 413
Glenside, PA 19038
(215) 887-2391

Louis Rotelli
(203) 788-4920
New Milford, CT
(Parts fabrication)
J.D. Shank
Fish Kill Road
Tannerville, PA 18372
(570) 620-0591 or (570) 350-1660

Traders Den
1655 Olson Drive
Cook, MN 55723
(218) 666-5083

Donald Wilson
Millersville, MD
(410) 647-8571


I would also go to your local book store and see if you can find Gun Digest books; especially this one to see if your gun is one of the 59 weapons covered.
http://www.cornellpubs.com/images4/AS5R2.jpg

I know I did satisfy your need for a schematic but maybe you can locate one via the resources above.

Thanks for choosing FixYa,
Kelly

Posted on Mar 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an iver Johnson 12 gauge shotgun single brake barrel with hammer ser. no.14976B Trying to find year and what the value would be.


Sorry we are not an appraisal service or a source of info for guns. Please contact a local gun shop.

Mar 21, 2017 | The Optics

1 Answer

I need a forend for a stevens double barrrel model 225


Stevens Shotgun Parts ' eBay

www.ebay.com > ... > Hunting > Gun Parts > Shotgun Parts > Stevens Shotgun Parts
Rating: 4 - ‎7 reviews
Results in Stevens Shotgun Parts ... Double Barrel 30" Side By Side Shotgun Barrel ... Stevens Savage Arms Model 77B 12-ga shotgun parts, trigger assembly.

Savage/Stevens/Springfield/Fox - Numrich Gun Parts

https://www.gunpartscorp.com > Manufacturers Need gun parts and accessories for SAV/STEV/SPGFLD? Look no further, Numrich has everything you need right here for SAV/STEV/SPGFLD.

225 DBL BARREL Accessories ' Numrich Gun Parts

www.gunpartscorp.com > Categories > Savage/Stevens/Springfield/Fox ManufacturerSTEVENS, Model225 DOUBLE BARREL, 325 DOUBLE BARREL, Product #995740, DescriptionFiring Pin, Price$24.85, Add To CartSold Out.

Savage Shotgun Parts, Stevens Shotgun Parts,Springfield Shotgun ...

www.gun-parts.com/savageshotgun/ ... Barrel Shoptgun Parts, Stevens Shotgun Barrels, Stevens Double Barrel Shotgun ... many Contract Gun Models. ..... #14 Bolt 340/840 30-30 or 225 5 Rd..

Shotgunworld.com - Find your shotgun parts here.

www.shotgunworld.com/parts.html Poppert's, Remington, Browning, Mossberg,Stevens,Winchester and L.C. Smith firing ... Remington, Mossberg, etc, Gun-Parts.com, Gun Parts for over 350 Models .... DOUBLE-BARRELED - A gun consisting of two barrels joined either side by ...
stevens double barrrel model 225 Google Search

Mar 06, 2017 | Optics

1 Answer

Trying to find year and manufacturer of a single shot 410 breakover shotgun. Serial number L5972 has serated area by notched site.


iver johnson single barrel champion shotguns with a single letter suffix to the serial number were manufactured between 1920 and 1929. it seem that most of the 410 were used quite a bit and very few are in excellent condition. the original finish was an oil finished stock, browned barrel and case hardened frame.

CHAMPION MODEL 36--------------------------------1909-1922
Single barrel; rebounding center mounted hammer; top lever operated break open design; gauges: 12, 16, and 20; barrel length: 28, 30, and 32 inches (features barrel and lug forged in one piece) bored full chock only; American black Walnut but* stock and fore-end; automatic extractors; weight 6¾ pounds; overall length with 30 inch barrel 45 inches; case hardened receiver (nickel available as option), browned barrel; automatic ejectors extra cost option; .410 bore, 24 and 28 gauges offered in 1913; 24 gauge dropped 1928; all gauges except 12 dropped after 1941; name changed to Champion single Barrel in 1917.
CHAMPION SINGLE BARREL---------------------------1923-1978
This is the same gun as the earlier Model 36 champion except that the smaller gauges are now built on the same frame as the large gagues. See above picture for specifications. The exact year production stopped has not yet been determined. Some of these single barrel shotguns have been seen with Canadian marking, these were most likely shipped to Canada and then marked as there is no evidence that Iver Johnson's Arms & Cycle Works ever had a manufacturing factory in Canada

Jun 01, 2015 | Optics

1 Answer

Want to find rifle barrel for a H&R model 176


Won't work, even though it's a 10ga., it won't take the pressures of a rifle caliber and the firing pin is too big. H&R will re-barrel a shotgun to another shotgun gauge or a handgun caliber. They will re-barrel a rifle to a shotgun gauge, a handgun caliber or another rifle caliber. You have to send it back to them to be fitted, they won't just sell you the barrel.

Dec 18, 2014 | Optics

1 Answer

I have an L C SMITH double barrel 12ga shotgun serial # fw 36102 what year was made?


Local gun shop has reference book that will tell you the needed information

Nov 28, 2014 | Smith Cycling

1 Answer

Harrington richardson arms


The "A" in the serial number signifies to be 1940.

Aug 24, 2014 | Optics

2 Answers

Gunparts com


The problem with your question is you omitted what MAKE/MODEL shotgun it is!
Not even what type (single break open, double barrel, pump, etc)!

May 17, 2014 | Optics

1 Answer

Remington 1100 wont eject or load another shell


check and see if the shell stop hasn't broken loose. this on the inside left side of the action . this could stopping the next shell in the mag. from being loaded. this not uncommon. but is an easy fix. a gun smith can stake it back in . in a few minutes for around $20.00

Nov 25, 2012 | Remington Shotgun Mount 12Ga Lh, B Square...

1 Answer

I bought a Remington 870 at Christmas time. The first time i shot it the shells are jamming in the gun. I took it home cleaned it and oiled it real good. Went and shot it again same problem. Either...


If the 870 is a Magnum model it should accept 3" shells. After making absolutely sure you have an unloaded shotgun, both chamber and magazine are empty, empty, empty, proceed with these few checks.

Assuming it may be a 2 3/4' model, have you double checked on the left side of the barrel near the receiver? There will be gauge and shell length stampings on the barrel. If you are jamming 3" shells in to a 2 3/4" shotgun you will get jams as you describe. Look at the empty shell casings if you have any and see if the shell appears to be damaged from the chambered and firing process. This could also indicate you have a improper shell length issue.
If you are shooting reloaded ammo make sure it has been properly re-sized, crimped and reloaded.
sloppy reloading of shotgun shells can cause jams as you describe. Improperly re-loaded shells can also cause leaks of bb's, (shot) in to the receiver and bore area.

Check for a loose bb. or bb's, (shot) in the receiver and chamber area. A lodged bb. in these areas will cause problems you have described.

Run your fingers along the barrel and visually check it for any slight bulge. If you detect or suspect a bulge do not shoot or load the shotgun until a gunsmith or the factory check the barrel thoroughly. If someone had loaded a 20, 16 or similar smaller guage shell in the chamber by accident and the gun was fired it will usually cause at minimum a stressed and bulged barrel. Many times a slight bulge in the barrel may not be visually obvious.

Most of the time if a 12 gauge shell gets loaded behind that one and fired you will have catastrophic failures, i.e. the gun can blow up and cause serious harm, blindness or even death in rare cases to the shooter. Shooters call this a "20/12" catastrophic failure. This type of accident is not to be taken lightly! this is why shotgun shells of different gauges are different in color normally.
Never ever, mix shotgun gauge shells in a pouch or box.

If you pump the shotgun too easily, (i.e. wimpy) it can jam up. Always pump, "rack" a shotgun with vigor. I'm not suggesting abusive action, just don't be slow or overly gentle with the pump action that ejects a shell and reloads the next one. Something related to this is if your action/slide bar is out of alignment or has become torqued out of it's proper alignment this will cause problems as you have mentioned. The action/slide bar is a long single piece of flat metal that is in alignment with the barrel and is attached to the front forearm of the shotgun. This is the flat piece of metal that actually makes the action open and close as you pump the shotgun. There is one on the left underside of the bore and forearm of the shotgun. When you pump the action you will easily observe it moving with your pumping action.

Check how the empty action feels to you. While dry-firing, (using an unloaded shotgun), does the action feel smooth or perhaps, gritty, sluggish, overly tight? If any of the later the you need to double check for debris, shot, excessive old lubrication, gumming of the action, a bent action/slide bar, etc. A normal 870 has a very smooth action.

Also, check the bore for any obvious nicks or obstructions that don't belong there. A good quality shotgun such as your 870 should operate best with very little lubrication. Excessive lubrication over time can cause gumming up of the receiver area. Also, improper lubrication products. Improper lubrication can cause problems you have described.

I am not a gun smith. I am simply an avid gun enthusiast. If you have any doubts as to anything that you observe while performing these basic checks on your shotgun, I strongly advise you to call the factory or take it to a local gun smith. Many gun shops will give your shotgun a courtesy check over and if you don't find a solution, many times they will within a few minutes. Do not be embarrassed to take the gun in to a gunsmith! Trust me, they will most likely treat you and you gun with respect and courtesy. Otherwise they won't be in business much longer.
If the gun shop fixes your problem make sure and purchase some shells and perhaps something else from them. We must support our small business firearms dealers and gun smiths

Hope this helps you!

Feb 02, 2011 | Remington Shotgun Mount 12Ga Lh, B Square...

Not finding what you are looking for?
Sport & Outdoor - Others Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...