Question about Bosch Exxcel WFO 2264 Front Load Washer

1 Answer

Not spining - Bosch Exxcel WFO 2264 Front Load Washer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,277 Answers

Hi from retired Englishman in SW France,
Sorry but I do not know your particular machine BUT I would suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not go to spin or release the door lock if there is water still left inside.
Here are my complete and general pre-typed (!) guidance notes for checking both the drain filter and the drain motor ;-0)
-------------------------------------

If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and most are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to pursuade it to come out to play!

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning!

Hope the filter is the problem and good luck!
John C

Posted on Mar 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why Do Kids Need a Chiropractor?


all bodies are held upright by muscles pulling on various parts of the spine , hips and shoulders
\ if the spine gets out of alignment, these muscles work over time to pull it straight which results in headaches , muscle pain and other ailments
chiropractor moves and realigns the spine to reduce that muscle problem
growing skeletons need constant alignment as all the joints are soft and easily damaged it left unattended

Jul 19, 2016 | Cars & Trucks

Tip

What Does a Chiropractor Do?


Chiropracty is an increasingly popular way of treating muscular problems and injuries.Chiropractors generally focus on neuromuscular problems, using spine manipulation and adjustment in their treatment methods.Viewed by most as an alternative therapy, chiropractors consider the relationship between the spine and the nervous system.Chiropracty believes that by treating spinal issues, pressure can be reduced on neurological tissue thus creating broad health benefits.Chiropractors uses a method called chiropractic adjustment to make small but significant alterations to the positioning of the spine.Chiropracty is a very uninvasive treatment method that is usually very effective.

on Dec 16, 2013 | Medical

1 Answer

What is the spine corrector barrel?


The spine corrector utilized for individual needs, stretching, aligning and strengthening the spine. It also relieves stiffness of the shoulders and hips as well as relieving common backaches.

Aug 30, 2012 | Allegro Exercise & Fitness

1 Answer

Turntable won't stop spining


If it is a turnatable that starts spining when the arm is moved to the record, then more than likely the start/stop switch inside the turnable is broken and is fixed in the on position. Or the leaver mechanism has become detached from the arm when the record was playing and left the other part pressing on the same switch that turns the motor on or off.
Removing the bottom of the turntable should should show the trouble.

Apr 03, 2012 | Philips WMM142211 Turntable

1 Answer

Got a dc7600, need to add 2 more monitors, as video cards in my other computers will not fit (too large for slot)..if i can , i need a video card with two slots to attach both monitors or get 2 video...


Which part of the video-cards are "too large" -- the electronic circuitry, or just the "spine"?

If just the "spine" is too tall, then unscrew the spine from the card, and attach a shorter spine.
Or, if you are "brave", then run "*****" -- don't attach any "spine" to the video-card.
Just connect the VGA/DVI cable from the monitor directly to the video-card.

Aug 18, 2011 | HP Compaq dc7600 Small Form Factor PC...

1 Answer

The needle doesn't go up & down. Any suggestions? Thank you


Does the handwheel turn eazy or is it stiff. If it is stiff you need to take the top and bottom off and lubricate all moving parts. may take a bit of turning the handwheel and lubicating(it may tire you out). If the handwheel is not stiff I would check to see iff the motor is spining at all. If motor is not spining may be a bad footcontrol. If it is spining try cleaning the belt pullys and tighting the belt.
hope this helps

Mar 22, 2011 | Kenmore 15516 Mechanical Sewing Machine

1 Answer

Oreck won't pick up dirt.


Check the roller brush, dust channel and then the back spine tubes - two parts which also holds the cloth bag - which holds it at the bottom via a spring. Unhook this, and prise up the rubber rings that hide the push in locks. Push the locks in and the spines should separate.You may need to undo the power cord since it comes out the top near the handle at the bottom. Check both spines and remove clogs with a thin round stick. Put everything back together slowly and switch on.

Jan 12, 2009 | Oreck XL Ultra Bagged Upright Vacuum

1 Answer

The starter makes a tik tik tiking sound


the seloind is gone or the battery is down

Jan 08, 2009 | 1998 Dodge Intrepid

1 Answer

Printing spine labels for books on hp laserjet 1020


convert the doc to a PDF so that the sizes and fonts save. That should fix your issue.

Jun 05, 2008 | HP LaserJet 1020 Printer

Not finding what you are looking for?
Bosch Exxcel WFO 2264 Front Load Washer Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...