Question about Samsung SyncMaster 940BE 19" LCD Monitor

1 Answer

Flashing blue light (black screen). I tried unplugging and leaving it off for a while and then plugged in power only, but I only get a flashing blue light. (Black Screen)

Posted by on

  • larry265 Mar 18, 2011

    It's not the pc, I tried connecting this monitor to another pc and it does the same exact thing. I connected power to the monitor (no vga cable) and I still got a flashing blue with a black screen.
    I also contected Samsung and they had me do the same thing that I tried and they said it needs repair. I feel that I'm going to have to rip it apart and check the caps.

    Thanks for your input damnor01.

    Larry

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,179 Answers

Thanks for providing me with good information relating to your problem.

My name is damnor01
Welcome to Fixya.

Your computer system is not POSTing it has failed the Power On Self Test.
There are a few things your can try to get it going again before handing the problem to a computer technician.
See my published guides they are listed below:
How to Remove the Side Panels of My Computer Chassis!!!

How do I reset my BIOS/CMOS to defaults?

My Computer is not turning on!!! Is it dead!!! No POST!!!

Try to do as much as you can!
Read through each guide at least once before attempting to solve the problem, to get the jist of what needs to be done.

Please be sure to rate this session!

Thanking you
damnor01

Posted on Mar 18, 2011

  • damnor01
    damnor01 Mar 18, 2011

    Indeed, it seems that the problem lies with the monitor!
    I'll leave it up to you!

    Thanking you
    damnor01

  • damnor01
    damnor01 Mar 18, 2011

    It is possible that it is the inverter that is faulty! Just like in the case of an LCD Screen in a laptop!
    damnor01

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Any solutions to my notebook problems


The first thing to always try is resetting your PC. With a laptop, you must unplug it and remove the battery. While the laptop is unplugged and the battery removed, hold down the power button for a minimum of 30 seconds. This will reset the PC. Plug it back in and see if it works now. Always try to reset the PC first, for many different problems.

May 31, 2014 | Compaq Presario Notebook

1 Answer

I can hear the sounds for start up but the light on the monitor is flashing. Have checked all wires, restarted pc and still just a black screen while the green light blinks. HELP :(


Try to shutdown the pc, then unplug the monitor from the power source, leave it unplugged for about 30 seconds, then plug it back, power it on and power on the pc.

If you can, try the monitor with another pc. If it works, it's a video card problem. If it doesn't work, it's the monitor proble. If you have another monitor, you can try it with you pc to solve every doubt, if it works then the monitor is dead.

Feb 28, 2011 | Microsoft HannsG HU171D 17" LCD Monitor

1 Answer

16" lcd new out of box flashing blue light on power indicator


Under a year old tv?This tv have power supply problems.Call the for warrenty repair.Or tries websites like shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Jul 14, 2010 | LG 32LG30 32 in. LCD HDTV

1 Answer

The screen was unplugged and now when plugged in the blue light around the power buton just flashes


I tried the reset procedure, i've left it unplugged now for a week and upon ... Now the fifth died. This time, no illumination, just flashing blue light. ... The screen is completely black, the power button is dark blue and no amount of ... The monitor was gone for about 2 weeks (maybe 3) I left it plugged in and ...
deliverator.silverfir.net/?p=369

Dec 04, 2009 | Samsung SyncMaster 932B LCD Monitor

1 Answer

My tv us fkashing blue light 3xs then resets no


I suspect that in this case your power board has a fault and will need technical intervention. NOT A DIY

But first try this, its a hard reset.

Turn unit off, unplug and leave overnight. Then re plug and turn on, if problem persists its a trip to the service shop.

Please rate my help++++Thanks for using FIXYA

Nov 22, 2009 | HP Pavilion MD5020N 50" DLP HDTV

1 Answer

Rock band 2 for wii - accessory blue lights won't stop flashing


hold down the power button on the wii console till the light is red, the blue lights will stop blinking

Jun 10, 2009 | Nintendo Wii Console

1 Answer

Monitor is black and blue light flashing


Boot from safe mode and try a different pixel/color arrangement. Obviously a lower pixel and color setting.

Mar 25, 2008 | Computers & Internet

19 Answers

Lcd sharp tv flashing green light


Try unplugging the unit and while unit is unplugged hold the volume up button and channel down buttons down and while depressing both buttons plug the unit in. Let go of the buttons and the unit should come on in the service mode. There will be a small k on the screen. With the sharp remote press the channel up button once. This should bring up a menu that will show a lamp error line. If the lamp error is = to 5 the unit is in lamp error shut down. User channel down to highlight that line and curser right arrow to highlight the lamp error #. Hit the enter button to clear the lamp errors. Now unplug the unit and let it sit for a minute and plug back in. I hope this corrects the problem. If the unit does not come on by doing this or if it does and you do not find lamp errors the power supply pcb may have been damaged by the surge.

Jan 06, 2008 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

5 Answers

Sceptre X7g Monitor Flashing Red & Blue Lights. Blank Screen


i fixed this problem by unplugging the monitor, unplugging the video cables. Then hold down the power button while plugging it back in. Release power button and then press power button for on. It worked then. I got the icon for no signal, i plugged back in my monitors. Sceptre X9W

Sep 11, 2007 | Sceptre X7GNAGAV 17" LCD Monitor

Not finding what you are looking for?
Samsung SyncMaster 940BE 19" LCD Monitor Logo

518 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...