Question about Lexmark T630 Laser Printer

Open Question

Our Lexmark T630 has been giving us problems for a few weeks now. Some of the issues...takes a VERY long time to print, will print multiple pages of the same page when only 1 is requested, printing characters in lieu of the document requested...any ideas? Thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Lexmark X1150 only prints first page

I have an x4550, running windows vista basic on an hp dv6000t notebook. i had the same problem. i contacted online lexmark tech and here's the solution that worked for me, thanks to help from lexmark (transcript of chat):

Please follow the steps given below to change the spool data format:
1. Click on "Start," "Control Panel," "Hardware and Sound" and "Printers."
2. Then, right click on the Lexmark printer icon and left click "Properties."
3. Either on the "Advanced" tab or the "General" tab for some models, there is a "Print Processor" button, left click it.
4. This is the spool format setting. It should be set to the default to "LEMF." Change it to "Lexmark." Under "Default datatype," select "NT EMF 1.008."
5. Click "OK" and exit back out to your desktop.
6. Please try printing again.

Posted on Feb 19, 2008

Niteesh
  • 65 Answers

SOURCE: only prints last page or least few pages of a ulti page document

if your taskbar displays printer icon on system tray double click on that & delete all privious prints.

select the text or area which you want to print. & give print command, & Click on print selection button & then Print.

Posted on Feb 23, 2008

  • 141 Answers

SOURCE: when printing duplex document 1st page is upside down

make sure the driver is set to book bind duplex, rather than tablet style which is what it is doing now. Good Luck!

Posted on Dec 29, 2008

  • 684 Answers

SOURCE: lexmark x4650 AIO, will only print first page of multiple pg doc

In this case what i would Request u to do is......... Goto Control Panel goto Printers folder......... There u will see the Lexmark Printer Icon........... Just right click on the Printer Icon and click on Properties......... Now click on Advanced and goto Print Processor......... Change it to Lexmark X1100 and NTEMF 1.0008........ Click on Apply click Ok now try to Print.......... Prints Fine............Issue Resolved........

Posted on Feb 05, 2009

  • 14 Answers

SOURCE: printer only prints one page of multiple page document

hi..

You may try to change the spool data format:

1. Click on "Start," "Control Panel," "Printers and Other Hardware" and "Printers and Faxes."

("Start," "Control Panel," "Hardware and Sound" and "Printers" for Vista...)

2. Then, right click on the Lexmark printer icon and left click "Properties."

3. Either on the "Advanced" tab or the "General" tab for some models, there is a "Print Processor" button, left click it.

4. This is the spool format setting. Under "Print processor" it should be set to "Lexmark *** series print processor." Next, under "Default datatype," select "NT EMF 1.008."

5. Click "OK" and exit back out to your desktop.

6. Try printing again.

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I received a solution from Jackpot00, but I am still getting smudges. Please help! I have a Lexmark T630 and I am getting smudges on the left side of the paper. I removed and cleaned the charge...


I have had this issue many times with the T640 printer. The two are similar enough that if you follow the attached video to disassemble the printer, you should be able to take a can of air and blow everything out. Do not replace the fuser kit, just clean yours with a can of air and place it back in the printer. Once all components are clean and reassembled, run a few test pages to see if the print has cleared up. I have had to run as many as 25 pages to clear out the loose toner in the printer after cleaning. You might also try a new toner cartridge.

http://www.youtube.com/watch?v=RjQkR4x9fqw

Hope this helps.

Aug 29, 2011 | Lexmark T630n Laser Printer

1 Answer

Hi, my printer is not printing. My black cartridge was low and i just changed it. With the new cartridge in its printing very pale grey instead of black and also very patchy printing. I also changed...


Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.


However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275 or point your browser to http://bit.ly/lFKDzs for online technical assistance.

Aug 22, 2011 | Lexmark Prospect Pro205 Wireless...

1 Answer

Problem in printer lexmark not doplex printing for attiontion manul doplex printing


The duplex unit for this printer is an optional fitting.
If you do not have the optional duplex unit installed then you can only do double sided printing one page at a time manually.
For instructions for manual double sided printing, click on this link :-
http://www.fixya.com/support/r7325259-double_sided_printing_using_single_sided

Feb 10, 2011 | Lexmark T630 Laser Printer

1 Answer

Lexmark T630 printer is printing 4 copies instead of one


Based on your question it sounds as it the setting was changed to print 4 copies instead of one:
To confirm it;s a issue with the machine Follow this outline:
Go into the menus on the machine via the control panel -> go into the finishing menu -> 3rd option down should display "Copies" go into their and change it back to 1.

However if that is set to one the problem resides on the print driver/ settings.
IF this does not resolve the issue please post back to this

Oct 20, 2010 | Lexmark T630 Laser Printer

1 Answer

Hello i have a lexmark t630 and when it prints out of tray 2 it says change tray two and beeps. It will work normal if you hit the select button. What could it be?


the printer is telling you that the tray is reporting the wrong size paper. print the network menu from tray 2 if it prints out smaller than the page it will be reporting smaller than letter. if the bottom line of the outline is missing its reporting legal size paper. if you are running lettersize paper in the tray check on the left side of the tray half way down the drawer you will see a plastic snap in plate with 3 fingers the bottom 2 should be sticking out for letter size paper. you only have to be one of the small adjust teeth off to make the third finger stick out and report the wrong size paper this is a very common issue. look at the metal fingers that stick out of the frame of the options tray to make sure they are uniform and straight. if the fingers are set right and not damaged then the logic board in the tray assembly will have to be replaced

May 14, 2010 | Lexmark T630 Laser Printer

1 Answer

I have a lexmark T630 and the fuser needed replacement, now the printer will print just fine with one problem. On every page that prints out there is about 2in from the left side of the paper light print....


Light print is usually caused by a bad charge roll or transfer roll. Can also be caused by a bad HVPS, which I hope is not. But try cleaning the charge roll. Check the transfer roll, it may have shifted all the way to the left. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

May 06, 2010 | Lexmark T630 Laser Printer

3 Answers

Lexmark T630


If you are using the Postscript driver, switch to one of the PCL drivers. Either PCL or PCLXL.

If you are using PCL, switch to a different driver.

If all of the above fail, send me a Print to File so I can debug it.
(janddgasrepair@verizon.net)

Don

Apr 07, 2009 | Lexmark T630 Laser Printer

2 Answers

Unsupported cartridges on lexmark x4580


As a temp solution I put some saliva on the pcb on the cartridge. Strange I know but it worked for me !

Jul 20, 2008 | Office Equipment & Supplies

1 Answer

Lexmark t630 noise problem


You printer may need a maintenance kit or the redrive replaced.

Jan 03, 2008 | Lexmark T630 Laser Printer

Not finding what you are looking for?
Lexmark T630 Laser Printer Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...