Question about HP LaserJet P4015 Printer

1 Answer

Manual feed isnt working. once tray 1 is open i thought it would automatically know i want to use manual feed.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 1,915 Answers

Not necesarily so, it depends on how you have the printer configured. To test the MP tray, use the arrow keys to get to troubleshooting menu, press check, use arrow keys to get to paper path test, press check, set tray option to tray 1, then print test page. Printer should feed from MP tray. If it does, then the problem is that you do not have the printer set to print from MP tray first or you have the tray options set to exclusive which means that if your print job asks for tray 2 then printer will not print from MP tray unless you specify MP tray in the print options.

Posted on Mar 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell 2360dn printer manual paper feed settings


I know this sound hokey but it just worked on one new out of the box.
1 - Take the paper tray out.
2 - Flip the printer up on it's back.
3 - Pull the forms pickup roller out and remove white bands.
4 - Turn the bands inside out and replace them on the rollers.

Aug 18, 2014 | Dell B2360dn

1 Answer

How can I get my printer to use the bottom tray as the default tray? I cannot get my printer to stop using the manual feed tray (the front compartment that has to be opened) on my P2055d Printer. I want it...


configure the for the paper size you normally use, set tray 1 as manual size. Print current settings to see how the trays are set now.
In the printer config on the computer check the paper settings in driver

Oct 30, 2013 | HP LaserJet P2055d Printer

1 Answer

Our infoprint 1125 is on a ibm mid range computer system & is accessible to 9 users. when we print an envelope, the printer asks for a manual load of the envelope, how do i change this to automatic...


It's been my experience with these machines that envelopes are always fed through the manual feed tray.

The Tray 2 cassette's pick up assembly is different than the manual feed,
it has 2 rollers that have a wide area they can pick up while the manual feed has just 1 single roller.
If you remove the tray cassette and look under the printer you can see the two rollers, these would probably have a hard time picking up a standard size envelope.
Also the tray would have to path the paper up and would have to bend it through the paper path which can cause problems with the flaps on the envelopes.

Best method is to use the manual feed tray and to also have the back cover open so that the envelopes path straight through the printer without being curled.

(I've seen these in a ton of places ranging from small business to banks and they always have the envelopes in the manual feed)

Jun 08, 2011 | IBM Infoprint 1125 Laser Printer

1 Answer

My office has the bizhub c360, and when I put paper into the bypass tray, it prints from the main tray instead of the bypass tray. The settings on the printer are for bypass tray, the settings for my...


Hi the machine could be defaulted to print from the main trays if you have the same type paper being fed from the manual feed same size paper then it will automatically take it from the default trays
IF you take the paper out of the trays and put it only in the manual feed will it print and take it from the manual feed also you have to tell the machine when you use the manual feed what size and type of paper is in the manual feed once you tell it what paper and type of paper like card stock you then need to make sure when you go to print that it is set on your computer with manual feed and type of paper must match what is set on machine

Mar 09, 2011 | Konica Minolta Bizhub 222 Black and White...

1 Answer

The belt inside my scanjet 4200c has come off. How do I reattach it? I have opened the scanner. It looks to be relatively easy but I don't know how to attach the belt to the motor etc


Instructions

1 Lift the hatch on the feed tray and pull up the large green tab to the left of the roller. Remove any jammed or torn paper from under the roller and around the feed tray.
2 Pull the input feed tray out of the automatic document feeder. Grasp the feed tray with both hands and pull it straight out.
3 Check the interior of the automatic document feeder for jammed paper. Remove any jammed paper, then reinsert the feed tray into the automatic document feeder. Push down the feeder cover until you hear a click.

Mar 08, 2011 | HP Scanjet 4200c Flatbed Scanner

1 Answer

When printing from computer and selecting tray 2 with 8.5x11 in it, if Tray 1 (Manual Feed) is in the down position with 11x17 paper in it the 5550n will automatically feed from Tray 1.


look at the tray settings on the printer, (Access the control panel) typical setting is "any size any type", change the tray 1 setting to 11 x 17 , plain paper, and it will then take the paper as requested.

Jan 11, 2011 | HP Hewlett Packard LaserJet 5550n Printer

1 Answer

Paper feeds, but won't print. As far as I can tell there is ink.


Ensure the Paper Tray is Not Overfilled Each printer tray has a maximum capacity rating, and this rating is based on a specific paper weight and or thickness. Consequently, situations might arise in which the tray will not be able to accommodate the maximum number of sheets listed in the printer specifications. Verify that the paper is not packed too tightly in the paper tray Adjust the Printer Paper Guides Adjust the paper guides to fit the size paper being used (Figure 1). The guides should be close (1/16" or less) to the paper without touching, so that the paper stays properly aligned without continually rubbing the guides. Locate and Remove Any Obstructions Inside the Printer and Input Tray Open the front cover and make sure the kickstand (if there is one) is engaged. Locate and remove any obstructions within the printer, such as paper pieces, staples, tape, or other objects. Close the cover. Remove all paper from the input tray. Inspect the input tray for any obstructions. Remove any visible obstructions. Reinsert the paper. Determine if Multiple Sheets Are Fed at Once From the Paper Tray or ADF Determine if multiple sheets are fed at once from the the paper tray or Automatic Document Feeder (ADF). Verify the print media installed is compatible with the printer Clean the ADF Paper Feed Roller Disconnect the AC power from the printer. Open the cover of the Automatic Document Feeder (Figure 1). Figure 1: Raise the Cover of the Automatic Document Feeder Using a damp paper towel, gently wipe the rubber roller to remove any ink or paper debris (Figure 2). Figure 2: Paper Feed Roller on the Automatic Document Feeder Close the cover and reconnect the power. Reseat the Dell Printer Power Adapter If your printer has a momentary loss of communication with your computer, it may be necessary to reset the printer to re-establish communication. You can reset a Dell? inkjet printer by unplugging the printer power cord from the electrical outlet and from the back of the printer for 10 seconds then reattaching the cord at both ends. If the printer queue icon is showing in your system tray (by your clock), you may have documents that are paused for printing. To resume printing a paused document: Double-click the printer queue icon to check document status of the active printer. Right-click on any documents that show Paused under Status, and then click Resume in the drop-down menu. Try a Different Type of Print Media Many image quality and paper feed issues are caused by the type of print media being used. Try a different type of print media that is specifically made for this printer. Replace the printer.

Nov 22, 2009 | Dell 968 All-In-One Printer

1 Answer

Hp lj 4250 tray 1 stoped feeding automatically.


Hello,

Here is the info from the service manual about tray configuration.

The value corresponds to the media size that is currently loaded in tray 1. ANY: If both the type and size for tray 1 are set to ANY, the printer will pull media from tray 1 first if media is loaded in the tray. A size other than ANY: The printer does not pull from tray 1 unless the type or size of the print job matches the type or size loaded in this tray.

So set both the paper size and type on tray one to "ANY" and you should be good to go.

I hope this helps, if so please rate my solution.

I have the full service manual available for instant download for $6.95 if you are interested.

Buddy
buddy@ccl-la.com
Corporate Computer
WWW.CCL-LA.COM

Jul 09, 2009 | Office Equipment & Supplies

1 Answer

Canon ByPass Doesn't Work


the real name is MANUAL FEED that is you have to go and select manual feed then the screen will guide you througth

Oct 23, 2008 | Canon imageRUNNER C3200 Copier

1 Answer

Laser jet HP 2600n


Before you print, check the printer settings and see if it is set to choose paper automatically. If it is try manually setting it to the tray 1 you mentioned. This may stop the printer from checking every time it is grabbing paper. Also try keeping the other tray slightly open which may automatically tell the printer to look right away at the other tray.

Hope this helps!

May 01, 2008 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP LaserJet P4015 Printer Logo

570 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...