Question about Computers & Internet

1 Answer

I CANNOT access my netgear WNR834Bv2 wireless router to setup since like everything I have no idea where the disc is and when I follow the NETGEAR support instructions it downloads as a fragment that I cannot open. Thank you

Posted by on

  • djm5657 Mar 18, 2011

    I had previously entered the same addresses into my browser and was only directed to the netgear website but clicking on the first link sent me right to the place I had been trying to reach. Excellent thank you.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,632 Answers

Hi,

Welcome to Fixya. If you want to access the Netgear WNR834 setup page you need a working computer connected to a router using ethernet cable.

Open a Browser then type 192.168.1.1, http://www.routerlogin.net or http://www.routerlogin.com The Default username is admin and the password is password. Password is case sensitive.

If the router won't accept the password. You can also reset the router to its factory state but you need to keep in mind that all settings will be back to its default settings. To reset the router press and hold the small reset button at the back of the router using a Pen or a Paper Clip for 15-30 seconds.

You can also refer to the manual below.

Netgear WNR834 Manual

If you have questions and assistance please let me know. Thanks for using Fixya.

Posted on Mar 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connect Nokia C3 to Netgear router


Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the default admin password and configure the wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mar 18, 2013 | NetGear WGR614 Wireless Router

1 Answer

Wnr834bv2 power light is sometimes on in amber, then blinking green and I keep losing connection


Try resetting and then reconfigure the router.
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Jul 11, 2012 | NetGear WNR834B RangeMax NEXT Wireless-N...

2 Answers

Either a netgear WNR834Bv2 prob. or Netgear WN311B prob.


Hi, follow the steps below to upgrade firmware on the router:

A. Open the router page using the following way:

1. Connect a computer to the router using any one of the 4 available ports.
2. Open the browser(Internet Explorer or Mozilla Firefox).
3. Access the router, usually with http://192.168.1.1 or http://www.routerlogin.com.
4. Login to the router with the Username as "admin" and Password as "password" (please note that the username and password is case sensitive).

B. Visit the following link to download the latest firmware.

http://kb.netgear.com/app/answers/detail/a_id/860

C. Please follow the steps to upload the firmware of the router:

1. Open the router page using the steps mentioned above.
2. Under Maintenance, click router Upgrade.
3. Click Browse and locate the upgrade file.
4. Click Upload.
5. Wait for the router to reboot.
6. Click on 'Logout' (at the bottom of the list) from left menu.

I hope this information allows you to resolve this issue.


If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.


Regards
Anand

Jul 31, 2009 | NetGear RangeMax NEXT WNR834B Wireless...

2 Answers

No Power to my Netgear Rangemax Next Wireless N-Router WNR834Bv2


This happens from time to time with these routers. It happenned to me with a Linksys and I found that the power unit in the router failed. One thing you could do is try a couple of different wall sockets or see if another adapter might work. Is your Netgear new enough to get replaced by the store?

Jul 08, 2009 | NetGear RangeMax NEXT WNR834B Wireless...

1 Answer

Netgear wireless router keeps asking for password do not have one


Login is admin and password is password are the defaults for this router.

Oct 30, 2008 | NetGear RangeMax NEXT WNR834B Wireless...

1 Answer

Netgear router setup


also, I am pretty sure you have to be PHYSICALLY connected to the router, not using wireless, if you want to edit the settings.

Hope this helps...

Sep 25, 2008 | NetGear RangeMax WPN824 Wireless Router...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...