Question about Intel Motherboard

1 Answer

Before CPU power button does not on when UPS was power on when processor fan is working on high speed and also cabinet fan also working on same as processor's fan. But CPU does not work, Power button was not to be on. what can I do

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Intel Master
  • 27,725 Answers

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error

hope this helps

Posted on Mar 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fan slow down and them high speed


change the fan ASAP, since the zooming noise and the slow performance will affect even the processor and you might end up replacing the processor as well if it persists. So get the fan ASAP and problem will be solved.

Sep 30, 2013 | Gateway GT5622 PC Desktop

1 Answer

Processor thermal treat error while booting


Make sure that cpu fans are running normally. Go to BIOS (generally with F2 on intel motherboards), and there will be information about cpu temperature, also fan speed (in RPM). If fan speed is 0 or very low problem is in cpu fan. (connection problem might be). If cpu fan speed is normal (high value) and cpu temperature is high, I will suggest you to open your PC case (or notebook) and see whether cpu fan is dirty or not. This is very common problem. If so, clean it.

May 09, 2012 | Intel Computers & Internet

2 Answers

Fan continually runs at a high speed


There are a couple of things here. I am assuming you mean the cpu fan. Not sure if there is a vga fan. And the power supply, well, you have no choice here. Anyway, make sure the inside of the computer is lint free. If the heat sink is dirty (under the fan), then dissipating heat is a problem. Heat triggers the fan based on the tolerance temperatures set in the bios of the box...normally accessed via F2 or F12 on bootup. Yes you can increase those temps but this is risky...as overheating can cause instability and hardware failure.

Jun 13, 2011 | eMachines D5039 PC Desktop

1 Answer

When i power on my ibm desktop thinkcenter the cpu fan starts with a very high speed and do not proceed further.


Its Due to your Heat sink & cooling fan problem, its located on the top of the CPU. open the CPU cabinet and clean the dust, and start the computer.

May 31, 2011 | Computers & Internet

1 Answer

Yesterday when i switched on my PC...some spark comes near cpu fan...then my ups is working properly and other accessories are working properly, but cpu alone not starting....there is no sound in...


Take a look closely at ur mobo, tell us where the spark came from? look also at the underside that may have touch the casing, check also the power connection from the PSU(Power Supply Unit) to the board connector!

Nov 11, 2010 | Intel (RK80532PG0881M) Pentium 4, 3 GHz...

2 Answers

1. cpu fan speed increases and runs away with its self when the computer is switched on. Seems like it its trying to cool down the processor. when the computer is switched off and the processor is checked...


its not a issue that cpu fan speed increases ...it doesnt matter much..
and for no video output it may be because of some loose connections in the cabinet of ur cpu...open the cabinet by unsrewing the screw...usually a single screw is there...then try to tight all the connections inside it...
also see if RAM chips are tightly inserted into their slots...
i think it will surely work coz sometimes i also face this no video problem and this works...

and dont forget to rate me if this works...plz....

Jun 22, 2010 | Dell Optiplex GX280 (99301) Motherboard

1 Answer

Intel d845gvsr motherboard p4 processesor if computer is on then no display . so i see , don;t heat processor.


First open cpu cabinet.
Refix RAM memory on motherbord.
Clean dust from all parts.
Remove PCI cards from motherbord.
Open processor fan and processor then refix both.
Pull CMOS cell from motherbord for 15 minutes so all settings defaults.
Make sure your motherbord not ground with cabinet.
Then check.
If processor and circuit are heat high then put extra fan in cabinet.
Let me know if you need further assistance.
Thanks.

Nov 03, 2009 | ASUS P5V800-MX Motherboard

1 Answer

There is no response when I power on my machine. It powers up, but there aren't any beeps like normal and the monitor shows nothing. Also, the light next to the power button stays orange.


Open cpu cabinet.
Refix ram memory.
Pull cmos cell from motherbord 10 minutes then refix it.
Remove pci cards from motherbord if any .
Clean dust from all parts.
Open processor fan and processor refix both.
Make sure motherbord is not ground with cabinet.
Check motherbord in outside of cabinet.
Reconnect all connection to harddisk.
Let me know if you need more assistance.
Thanks.

Oct 31, 2009 | Computers & Internet

1 Answer

High pitch frequency comming from the cpu


might be the fan on the processor or in your actual hardrive there are actual discs that spin ,this is most likely to be the problem, and sorry no solution 2 that except gettin a new hardrive.

Jan 15, 2008 | Computers & Internet

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

vsri9

Level 2 Expert

73 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...