Question about Proview PL713S 17" Flat Panel LCD Monitor

2 Answers

My proview PL713s will not display an image!

I have two that are about three years old. About two months ago they both went blank. I just cannot get them to work.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

My PL713S started showing all kinds of stuff when powered on, then
nothing but black.I searched online and found one post that said to check the capacitors in the power supply. I did, found 3 bad (bulging
tops). I replaced all 6 of the 470's plus the 220 (smaller one beside
the 470's). After replacing the caps, it would power up but go to standby (yellow light). I checked the supply again, found the 100uf
400volt cap with a bulge (larger capacitor laying on its side next to the 470's I had replaced). Replaced it and voila the monitor works again. If anyone reads this , I hope it helps......

Posted on Apr 23, 2010

I'm having the same problem. Did you ever figure what went wrong?

Posted on Oct 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jumpy monitor


Cheak the montor cable;set up the ups away from the monitor.even the problem is occured then problem with the circuit of the monitor.

Feb 13, 2010 | Proview PL713S 17" Flat Panel LCD Monitor

1 Answer

My monitor does not work right. it says vga not support.. its a proview 17" flatscreen..active matrix tft lcd


I suspect your Computers Display settings need adjustments and or a Driver from Proview installed...therefor if you can get on the net, I would look at FAQ's on Proviews Website, i.e:

http://www.proview.net/Support/FAQ_Question.aspx?pi=2026

hope that helps,

Bastian






Jun 02, 2009 | Proview PL713S 17" Flat Panel LCD Monitor

1 Answer

When energized, screen stays on for about two seconds then blanks


Hi...there,
Well, it's seems your monitor backlight inverter are bursted. Usually, the monitor had a 1 year for the screen panel and 3 years for parts and labors. You're still under warranty, send it back to manufacturer for repaired.

Nov 15, 2008 | Proview PL713S 17" Flat Panel LCD Monitor

1 Answer

Monitor displays breifly then goes to blank screen


The power -inverter board probably needs an overhaul.
I redo many of these.
If the screen was pinkish or flickering before it finally got to this point, it is possible that a bulb has gone bad.
Fran

Sep 07, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Web page looks different on my Notebook


It most probably cause by your PC's display card.

Apr 18, 2008 | Proview PL713S 17" Flat Panel LCD Monitor

1 Answer

Beware this monitor! PL713s


Probably a good solution. 17" LCD's are pretty inexpensive these days and probably cost as much to diagnose and fix this one. You can purchase on-line as well. www.tigerdirect.com www.newegg.com Good luck

Aug 27, 2007 | Proview PL713S 17" Flat Panel LCD Monitor

1 Answer

Can see screen for one second


I had mine for almost 3 years and last month ran into the same problem and i take good care of it. I turn it on it stays on for a 1-3 sec and goes black. can't figure out what it is

Apr 19, 2007 | Liquid Video L17LCD2 17" Flat Panel LCD...

Not finding what you are looking for?
Proview PL713S 17" Flat Panel LCD Monitor Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Computers & Internet Experts

Diego Zenizo
Diego Zenizo

Level 1 Expert

22 Answers

Brad Brown

Level 3 Expert

15133 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Are you a Proview Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...