Question about Sharp Flat Panel Televisions
I don't have a manuel to tell me how to program it in for Sharp TV. . this control only has the numbers 1,2,3,4. it does not have the numbers 0,6,7,8,9,on it. canyou help me?
1) Type ONEFORALL-NA.COM/CONTACT.PHP into the Google
searchbox, then start the search.
2) Once you are on the website, fill out the email form, and click
on SEND at the bottom of the page.
3) This website also provides free, downloadable copies of its
instruction manuals, so be sure to request the manual, too.
Hope this info helps you out. Please take a moment to rate this solution, by using the rating system below. Thanks.
Posted on Aug 03, 2008
Tips for a great answer:
Jun 17, 2011 | Sharp Flat Panel Televisions
Apr 23, 2011 | Flat Panel Televisions
1. Manually turn on the component
you want the remote to control.
2. Locate the enclosed Code Lists.
Find the list for the component you
wish to program. Find your
component's brand. You will see a
listing of four-digit codes for each
brand. If your brand isn't listed, use
one of the Code Search methods to
program the remote control. (Refer
to pages 7 and 9 for Manual and
Auto Code Search methods.)
3. Press and hold the component key
(TV, VCR•DVD, SAT•CBL) you
wishto program. The illuminated
ON•OFF key turns on and
remains on. If you release the
component key at any time
during the Direct Code Entry
procedure, the illuminated
ON•OFF key blinks four times,
and the process is exited.
4. While holding down the
component key, consult the Code
Lists for the four-digit code that
corresponds to your component's
brand and use the number keys
(0-9) on the keypad to enter it.
While you are pressing the
numbers, the illuminated
ON•OFF key turns off.
5. After the fourth number is
entered, the illuminated ON•OFF
key turns on. At this time, release
the component key. If the
illuminated ON•OFF key turns
off, you have entered a valid code
and have followed the correct
procedure for Direct Code Entry.
If you enter a code number that is not
in the Code Lists or you do not follow
all of the steps for Direct Code Entry,
the illuminated ON•OFF key blinks
four times when the component key
is released. This is an indication that
a programming error has occurred.
In that case, repeat the Direct Code
Entry process from step 3.
of each key, be sure to keep the remote
pointed at the IR sensor of the
component you are currently
programming the remote to control.
6. To confirm that the component key
is programmed with the correct
code for maximum functionality,
test the component. Attempt to
control a variety of the
component's functions with the
remote. If some of the features of
your components do not work, try
programming the remote with a
different code in the list until you
find the code that allows the
remote to control the majority of
your component's functions.
Different codes can provide
different levels of functionality
Mar 04, 2011 | Flat Panel Televisions
Nov 20, 2010 | Flat Panel Televisions
May 05, 2009 | Insignia IS-LCDTV32 32 in. Television
Mar 20, 2009 | LG 42LC2D 42 in. LCD HDTV
Jan 25, 2009 | Insignia LCDTV26 26 in. Television
Dec 30, 2008 | Flat Panel Televisions
Nov 17, 2008 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...
Nov 08, 2008 | Sharp Aquos LC-32GD4U 32 in. LCD HDTV
Dec 08, 2016 | Sharp LC 60EQ10U 60 inch Aquos 1080p
160 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: